Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Larval life span of the echinoid evechinus chloroticus (val.)

Newly metamorphosed Evechinus chloroticus (Val.) were observed in three larval cultures 36, 30, and 28 days after fertilisation, indicating that the free swimming larval life may last about 1 month.     

Imaging of Buried Archaeological Materials: The Reflection Properties of Archaeological Wood

Effective marine archaeological site management demands detailed information on not only the spatial distribution of artefacts but also the degradation state of the materials present. Although sonar methods have frequently been used in an attempt to detect buried wooden shipwrecks they are currently unable to indicate their degradation state. To assess the sensitivity of acoustic measurements to changes in the degradation state of such material, and hence the potential for sonars to quantify degradation, laboratory measurements of compressional wave velocity, as well as bulk density for oak and pine samples, in varying states of decay, were undertaken. These data enabled the calculation of theoretical reflection coefficients for such materials buried in various marine sediments. As wood degrades, the reflection coefficients become more negative, resulting in the hypothesis that the more degraded wood becomes, the easier it should be to detect. Typical reflection coefficients of the order of −0.43 and −0.52 for the most degraded oak and pine samples in sand are predicted. Conversely, for wood exposed to seawater the predicted reflection coefficients are large and positive for undegraded material (0.35 for oak, 0.18 for pine) and decrease to zero or slightly below for the most degraded samples. This indicates that exposed timbers, when heavily degraded, can be acoustically transparent and so undetectable by acoustic methods. Corroboration of these experimental results was provided through comparison with high resolution seismic reflection data that has been acquired over two shipwrecks.     

Optimal Processing of Marine High-Resolution Seismic Reflection (Chirp) Data

Chirp frequency-modulated (FM) systems offer deterministic, repeatable source-signatures for high-resolution, normal incidence marine seismic reflection data acquisition. An optimal processing sequence for uncorrelated Chirp data is presented to demonstrate the applicability of some conventional seismic reflection algorithms to high-resolution data sets, and to emphasise the importance of a known source-signature. An improvement of greater than 60dB in the signal- to-noise ratio is realised from correlating the FM reflection data with the transmitted pulse. Interpretability of ringy deconvolved data is enhanced by the calculation of instantaneous amplitudes. The signal-to-noise ratio and lateral reflector continuity are both improved by the application of predictive filters whose effectiveness are aided by the repeatability of the Chirp source.     

Deglacial history of glacial lake windermere,UK: implications for the central British and Irish Ice Sheet

In the UK, a combination of outcrop mapping, satellite digital elevation models, high‐resolution marine geophysical data and a range of dating techniques have constrained the maximum limit and overall retreat behaviour of the British and Irish Ice Sheet (BIIS). The changing styles of deglaciation have been most extensively studied in the west and north‐western sectors of the BIIS, primarily using offshore geophysical surveys. The surviving record in the southern, terrestrial sector is fragmentary, permitting only large‐scale (tens of kilometres) and longer timescale (c. 1 ka) reconstructions of ice‐margin movement, with limited information on deglacial processes. Here we present a high‐resolution study of the retreat behaviour for a section of the southern ice‐margin from Windermere in the Lake District, using high‐resolution two‐dimensional multi‐channel seismic data, processed using prestack depth migration. By combining the seismic stratigraphy with landform morphologies, extant cores and seismic velocity measurements, we are able to distinguish between: over‐consolidated till; recessional moraines; De Geer moraines; flowed till/ice‐front fan; supra‐/en‐glacial melt‐out till; and subsequent glaciolacustrine/lacustrine sedimentation. The results reveal a complex and active valley glacier withdrawal from Windermere that changed character between basins and produced two small, localized areas of ice‐stagnation and downwasting. This study indicates that similar active ice‐margin retreats probably took place in other valleys of the Lake District during the Late Devensian deglaciation rather than the previously held view of rapid ice‐stagnation and downwasting. When combined with the regional terrestrial record, this supports a model of early ice loss in terrestrial England compared with other parts of the UK. Copyright © 2012 John Wiley & Sons, Ltd.     

Seismic stratigraphy records the deglacial history of Jakobshavn Isbræ, West Greenland

Jakobshavn Isbræ is one of the largest ice streams in the Greenland Ice Sheet, presently draining c. 6.5% of the Inland Ice. Here we present high‐resolution Chirp and Sparker sub‐bottom profiles from a seismic survey conducted just outside of the Jakobshavn Isfjord, which provides detailed insight into the glacimarine sedimentary history of the Jakobshavn ice stream during the Holocene. We observe acoustically stratified and homogeneous sediments that drape an irregular substratum and were deposited between ～10 and c. 7.6k cal a BP. The stratified lower units are interpreted as the product of ice‐proximal glacimarine sedimentation deposited rapidly when the grounded ice margin was located close to depositional basins on topographic highs. The upper acoustically homogenous units reflect suspension settling of fine‐grained material and gravitational flows that were extruded from an increasingly unstable ice margin as the ice retreated into the fjord. Proximity to the ice margin and bedrock topography were the dominant controls on sediment accumulation during deglaciation although the 8.2‐ka cooling event probably influenced the position of the ice margin at the fjord mouth. The post‐glacial sedimentary record is characterized by glacimarine and hemipelagic rainout with an increased ice‐rafted detritus fraction that records sedimentation following ice stream retreat into Jakobshavn Isfjord sometime after c. 7.8k cal a BP. Copyright © 2011 John Wiley & Sons, Ltd.     

Sequence stratigraphy of a Middle to Upper Ordovician foreland succession (Ottawa Embayment,central Canada): Evidence for tectonic control on sequence architecture along southern Laurentia

The Middle to Upper Ordovician foreland succession of the Ottawa Embayment in central Canada is divided into nine transgressive‐regressive sequences that defines net deepening of a platform succession over ~15 m.y. from peritidal to outer ramp settings, then a return to peritidal conditions over ~3 m.y. related to basin filling by orogen‐derived siliciclastics. With a backdrop of net eustatic rise through the Middle to Late Ordovician, there are several different expressions of structural influence on sequence development in the embayment. During the Middle Ordovician (Darriwilian), foreland‐basin initiation was marked by regional onlap with abundant synsedimentary deformation across a faulted trailing‐margin platform interior; subsequent craton‐interior uplift resulted in voluminous influx of siliciclastics contemporary with local structurally influenced local channelization; then, a formation of a platform‐interior shale basin defines continued intrabasin tectonism. During the Late Ordovician (Sandbian, early Katian), structural influence was superimposed on sea‐level rise as indicated by renewed local development of a platform‐interior shale basin; differential subsidence and thickness variation of platform carbonate successions; abrupt deepening across shallow‐water shoal facies; and, micrograben development coincident with foreland‐platform drowning. These stratigraphic patterns are far‐field expressions of distal orogen development amplified in the platform interior through basement reactivation along an inherited buried Precambrian fault system. Comparison of Upper Ordovician (Sandbian‐lower Katian) sequence stratigraphy in the Ottawa Embayment with eustatic frameworks defined for the Appalachian Basin reveals greater regional variation associated with Sandbian sequences compared to regional commonality in base level through the early Katian.     

A high‐resolution seismic stratigraphy from a Scottish sea loch and its implications for Loch Lomond Stadial deglaciation

A detailed high‐resolution seismic stratigraphy, calibrated by core data and terrestrial geomorphological mapping, has been constructed for Loch Ainort, Isle of Skye. This study has provided a palaeoenvironmental history of the area as well as important corroborative evidence for the stepped deglaciation of the Loch Lomond Stadial ice‐field on Skye. The Ainort Glacier reworked pre‐Loch Lomond glacial deposits terminating in a grounded tidewater ice‐front potentially 800 m beyond the previously extrapolated limit. The first stage of deglaciation was characterised by the formation of De Geer moraines indicative of a period of interrupted retreat. The second phase, by contrast, produced hummocky relief with sporadic linear moraines suggesting periods of uninterrupted retreat with occasional stillstands/readvances. Paraglacial reworking of terrestrial slopes resulted in the deposition of thick, subaqueous, debris flows which graded into fluvioglacial dominated sediments and ultimately modern fjordic deposits. The identification of an initial period of active retreat punctuated by numerous readvances correlates directly with the terrestrial record. However, the offshore stratigraphy suggests that although the second phase was dominated by uninterrupted retreat, occasional stillstands/ readvances did occur. Copyright © 2000 John Wiley & Sons, Ltd.     

Helminth parasites of brown trout (Salmo Trutta L.) in Canterbury,New Zealand

Neopeltopsis pectinipes gen. et sp. nov. is described and figured from sublittoral marine algae at Wellington, New Zealand; the genus is an addition to the Peltidiidae Sars. The genus is compared with the other genera of the family, and a revised key is given to the genera of the Peltidiidae.