Spatial and temporal variability of microplankton and detritus, and their export to the shelf sediments in the upwelling area off Concepción, Chile (∼36°S), during 2002-2005

Seasonal variations in diversity and biomass of diatoms, tintinnids, and dinoflagellates and the contribution of microplankton and faecal material to the vertical flux of particulates were investigated at one time series station T (station 18) between 2002 and 2005 and at a grid of stations during November 2004 in the coastal and oceanic area off Concepción (36°S), Chile. The variations were analysed in relation to water column temperature, dissolved oxygen, nutrient concentration, offshore Ekman transport, and chlorophyll-a concentration. Abundance was estimated as cell numbers per litre and biomass in terms of biovolume and carbon units.A sharp decrease with depth was observed in the abundance of both phytoplankton and microzooplankton during the whole annual cycle; over 70% of their abundance was concentrated in the upper 10 m of the water column. Also, a clear seasonality in microplankton distribution was observed at station T, with maxima for diatoms, tintinnids, and dinoflagellates every summer (centred on January) from 2002 to 2005.On the grid of stations, the maximum integrated (0-50 m) micro-phytoplankton abundances (>1 × 10⁹ cells m⁻²) occurred at the coastal stations, an area directly influenced by upwelling. A similar spatial distribution was observed for the integrated (0-200 m) faecal carbon (with values up to 632 mg C m⁻²). Tintinnids were distributed in all the first 300 miles from the coast and dinoflagellates were more abundant in oceanic waters.At station T, the average POC export production (below 50 m depth) was 16.6% (SD = 17%; range 2-67%; n = 16). The biological-mediated fluxes of carbon between the upper productive layer and the sediments of the continental shelf off Concepción depend upon key groups of phytoplankton (Thalassiosira spp., Chaetoceros spp.) and zooplankton (euphausiids) through the export of either cells or faecal material, respectively.     

Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia

Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.     

Distinguishing the effect of diapir growth on magnetic fabrics of syn‐diapiric overburden rocks: Basque–Cantabrian basin,Northern Spain

An analysis of Anisotropy of Magnetic Susceptibility was done on Aptian–Albian sediments from the Basque–Cantabrian basin. Samples were collected from 39 sites in the halokinetic sequences of the Bakio, Bermeo, Guernica and Mungia diapirs; 28 sites were sampled close to diapirs, and 11 sites were far from the diapir edges. The magnetic foliation is parallel to bedding, suggesting it reflects depositional and compaction processes, whereas the orientation of magnetic lineation varies. Far from the diapir edges, the magnetic lineation is interpreted as being related to the regional Pyrenean compression. Close to diapir edges, the observed behaviour shows that diapirs, predominantly formed by rigid ophites, have acted as buttresses, with shadow areas at their northern faces being protected from the Pyrenean compression. The high sensitivity of AMS makes it a very useful tool to distinguish deformation in halokinetic sequences related to diapir growth from that related to subsequent compression.     

Increased levels of petroleum hydrocarbons in the surface sediments of Swedish coastal waters

Petroleum hydrocarbons in the sediments of the Bothnian Bay, Baltic proper, Öresund, Kattegatt and Skagerrak were analysed in a survey of oil pollution along the Swedish coast in 1974 and 1975. Sixty-one of these sediment stations were revisited in 1982 and analysed with the methods used in the first survey. The mean content of petroleum hydrocarbons (paraffin-naphthene fraction) in the sediment surface showed a statistically significant increase from 199 to 252 μg g^?1 dry wt. The main increase had taken place in the coastal areas. Within 0–20 km distance of urbanized areas (>20 000 inhabitants) petroleum hydrocarbons had increased from 371 to 447 μg g^?1. Sediment levels increased from 76 to 117 μg g^?1, 20–50 km from urbanized areas. The increase in these areas was equivalent to 0.119 g m^?2 yr^?1.     

Rotation history of Alaskan tectonic blocks

Alaska is considered to be tectonically comprised of five elongate blocks separated by transcurrent faults formed prior to rotation which enter the state from the southeast and continue westward to the edge of the Bering Sea continental shelf. We propose an additional, inactive fault, indicated by gravity and magnetic data and other observations, to extend between the Bering Strait and the Arctic Ocean continental shelf east of the Northwind escarpment, separating northern Alaska from northeast Siberia. Near the center of the state the faults are bent, concave to the south, about the north-south axis of the so-called Alaska orocline. In our reconstruction the blocks have rotated from a position whereby the north slope was adjacent to Banks Island of the Canadian basin. During the rotation the northernmost, or Brooks block, was squeezed, up to 15% in the western end, to its present width. After rotation, when the three southern blocks were in their present position, the Brooks block and the next block to the south were pushed eastward by North America moving against Siberia, forming the bend in the British-Richardson-Ogilvie Mountains we call the Ogilvie orocline.     

Some economics of ‘dangerous’ climate change: Reflections on the Stern Review

The Stern Review on the Economics of Climate Change concluded that there can be “no doubt” the economic risks of business-as-usual (BAU) climate change are “very severe” [Stern, 2006. The Economics of Climate Change. HM Treasury, London, p. 188]. The total cost of climate change was estimated to be equivalent to a one-off, permanent 5–20% loss in global mean per-capita consumption today. And the marginal damage cost of a tonne of carbon emitted today was estimated to be around $312 [p. 344]. Both of these estimates are higher than most reported in the previous literature. Subsequently, a number of critiques have appeared, arguing that discounting is the principal explanation for this discrepancy. Discounting is important, but in this paper we emphasise that how one approaches the economics of risk and uncertainty, and how one attempts to model the very closely related issue of low-probability/high-damage scenarios (which we connect to the recent discussion of ‘dangerous’ climate change), can matter just as much. We demonstrate these arguments empirically, using the same models applied in the Stern Review. Together, the issues of risk and uncertainty on the one hand, and ‘dangerous’ climate change on the other, raise very strongly questions about the limits of a welfare-economic approach, where the loss of natural capital might be irreversible and impossible to compensate. Thus we also critically reflect on the state-of-the-art in integrated assessment modelling. There will always be an imperative to carry out integrated assessment modelling, bringing together scientific ‘fact’ and value judgement systematically. But we agree with those cautioning against a literal interpretation of current estimates. Ironically, the Stern Review is one of those voices. A fixation with cost-benefit analysis misses the point that arguments for stabilisation should, and are, built on broader foundations.     

Permeable Asphalt: A New Tool to Reduce Road Salt Contamination of Groundwater in Urban Areas

Chloride contamination of groundwater in urban areas due to deicing is a well‐documented phenomenon in northern climates. The objective of this study was to evaluate the effects of permeable pavement on degraded urban groundwater. Although low impact development practices have been shown to improve stormwater quality, no infiltration practice has been found to prevent road salt chlorides from entering groundwater. The few studies that have investigated chlorides in permeable asphalt have involved sampling directly beneath the asphalt; no research has looked more broadly at surrounding groundwater conditions. Monitoring wells were installed upgradient and downgradient of an 860 m² permeable asphalt parking lot at the University of Connecticut (Storrs, Connecticut). Water level and specific conductance were measured continuously, and biweekly samples were analyzed for chloride. Samples were also analyzed for sodium (Na), calcium (Ca), and magnesium (Mg). Analysis of variance analysis indicated a significantly (p < 0.001) lower geometric mean Cl concentration downgradient (303.7 mg/L) as compared to upgradient (1280 mg/L). Concentrations of all alkali metals increased upgradient and downgradient during the winter months as compared to nonwinter months, indicating that cation exchange likely occurred. Despite the frequent high peaks of chloride in the winter months as well as the increases in alkali metals observed, monitoring revealed lower Cl concentrations downgradient than upgradient for the majority of the year. These results suggest that the use of permeable asphalt in impacted urban environments with high ambient chloride concentrations can be beneficial to shallow groundwater quality, although these results may not be generalizable to areas with low ambient chloride concentrations.     

Real‐time distributed hybrid testing: coupling geographically distributed scientific equipment across the Internet to extend seismic testing capabilities

Large‐scale testing and qualification of structural systems and their components is crucial for the development of earthquake engineering knowledge and practice. However, laboratory capacity is often limited when attempting larger experiments due to the sheer size of the structures involved. To overcome traditional laboratory capacity limitations, we present a new earthquake engineering testing method: real‐time distributed hybrid testing. Extending current approaches, the technique enables geographically distributed scientific equipment including controllers, dynamic actuators and sensors to be coupled across the Internet in real‐time. As a result, hybrid structural emulations consisting of physical and numerical substructures need no longer be limited to a single laboratory. Larger experiments may distribute substructures across laboratories located in different cities whilst maintaining correct dynamic coupling, required to accurately capture physical rate effects. The various aspects of the distributed testing environment have been considered. In particular, to ensure accurate control across an environment not designed for real‐time testing, new higher level control protocols are introduced acting over an optimised communication system. New large time‐step prediction algorithms are used, capable of overcoming both local actuation and distributed system delays. An overview of the architecture and algorithms developed is presented together with results demonstrating a number of current capabilities. Copyright © 2013 John Wiley & Sons, Ltd.