Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

泌阳凹陷安棚油田深层系成岩作用研究及其在成岩圈闭预测中的应用

深层系一般指沉积盆地中埋藏深度在2 500～2 700 m以下的地层,其储集物性普遍很差,但在一定条件下,深部溶蚀作用可产生优质储层,形成成岩圈闭.然而这种成岩圈闭的预测一直是一个难题.安棚油田位于河南泌阳凹陷东南部,勘探成果表明,在该油田深层系下第三系核桃园组核三段下部(简称(核三下)席状的扇三角洲砂体中存在成岩圈闭.本次通过定量的成岩作用研究和成岩阶段划分,对成岩圈闭的形成机理和分布进行了探讨.研究表明,该区核三下的砂体经历了压实、胶结、溶蚀等多种成岩作用,不同的成岩作用发生于不同的埋藏深度.2 700～3 100 m之间以胶结强烈为特征,属于胶结带.3 100～3 900 m之间以次生溶蚀孔隙发育为特征,尤其是3 200～3 600 m之间, 属于深部溶蚀带.本区核三下砂体自南而北埋藏深度逐渐变浅,其上倾方向处于胶结带的部分由于强烈胶结而变成致密层,可封堵油气,而下倾方向处于溶蚀带的部分由于次生溶蚀孔隙发育而成为良好储层,从而形成成岩圈闭.根据不同埋藏深度、不同成岩阶段孔隙发育和保存的特征,可预测成岩圈闭分布。     

重油凝胶色谱制备样品中痕量镍的分析研究

研究表明微波密闭消解法对重油凝肢色谱制各样品的前处理，不造成易挥发有机金属化合物的损失，对样品无污染。采用消解前定容，配合石墨炉二次进样富集样品，可以测定样品中低至10^—9级的镍。方法应用于镍在渣油中随相对分子质量分布分析中，标准样品对照数据吻合好，相对标准偏差(RSD，n＝11)为8％。     

软土路基沉降与软土层厚度及填土高度的关系分析

本文就路基沉降观测资料进行深入分析,总结出路基沉降与软土层厚度及填土高度的关系和规律,并分析了原因,推导出计算路基沉降的公式,提出了判断填土速率快慢和填土高度变化大小的新方法。     

黄陵矿区洛河组砂岩水文地质特征及水资源开发与保护

根据大量的供水勘察资料，从洛河组砂岩所处的区域构造位置、它的分布与厚度变化规律、孔隙裂隙特征、水力性质、动态变化、水质特征、环境水文地质条件诸方面进行了详细地论述；分析了洛河组砂岩地下水的补给、径流、排泄条件，指出洛河组砂岩分布面积广、厚度大，地下水丰富且水质良好，具备形成大型水源地的条件。同时分析了煤炭资源开发、人工开采、林业生产等可能对水源地造成不利影响的因素，提出了开发和保护水资源的建议和措施。     

水溶性污染物在土壤中转化的原位实验方法

建立了一种研究水溶性污染物在土壤中运转化的原位实验方法，该方法已成功地应用于研究黄土中氨氮的运移转化规律，克服了土柱实验存在的破坏土壤结构及氧化还原电位发生变化等所引起的实验误差。     

综合物探方法在地质灾害调查中的应用研究

介绍了在地质灾害调查中常用的几种物探方法的适用条件和应用范围,并通过实例展示了各种方法的应用效果。结果表明浅层物探方法应用效果显著,在地质灾害调查中具有较好的应用前景。     

Geothermal investigations in the Bohus granite area in southwestern Sweden

Heat generation and heat flow were determined for the Bohus granite massif in western Sweden. This is the start of a major program concerning geothermal energy in Sweden. Neutron activation analyses, temperature measurements, thermal conductivity measurements have been carried out. As was expected the result, 76 mW m⁻², shows that even old Precambrian shields locally exhibit much higher values than normal.     

Characterization of aquifers in the Vientiane Basin,Laos, using Magnetic Resonance Sounding and Vertical Electrical Sounding

The aim of this study is to define and characterize water bearing geological formation and to test the possibility of using geophysical techniques to determine the hydrogeological parameters in three areas in the Vientiane basin, Laos. The investigated areas are part of the Khorat Plateau where halite is naturally occurring at depths as shallow as 50 m in the Thangon Formation. Magnetic Resonance Sounding (MRS) has been used in combination with Vertical Electrical Sounding (VES) in different geological environments. In total, 46 sites have been investigated and the MRS and VES recognized the stratigraphic unit N₂Q_1–3, consisting of alluvial unconsolidated sediments, as the main water bearing unit. The aquifer thickness varies usually between 10 and 40 m and the depth to the main aquifer range from 5 to 15 m. The free water content is here up to 30%, and the decay times vary between 100 and 400 ms, suggesting a mean pore size equivalent to fine sand to gravel. The resistivity is highly variable, but usually around 10–1500 Ω-m, except for some sites in areas 1 and 2, where the aquifer is of low resistivity, probably related to salt water. Hydraulic and storage-related parameters such as transmissivity, hydraulic column, have been estimated from the MRS. The MRS together with VES has been shown to be a useful and important tool for identifying and distinguishing freshwater from possible salt-affected water as well as the salt-related clay layer of the Thangon Formation. This clay layer is characterized by very low free water content and a resistivity lower than 5 Ω-m and can be found in all 3 areas at depths from 15 to 50 m.