A model for the viscosity of rhyolite as a function of H2O-content and pressure: A calibration based on centrifuge piston cylinder experiments

The Newtonian viscosity of synthetic rhyolitic liquids with 0.15-5.24 wt% dissolved water was determined in the interval between 580 and 1640 °C and pressures of 1 atm and 5-25 kbar. Measurements were performed by combining static and accelerated (up to 1000g) falling sphere experiments on water-bearing samples, with high temperature concentric cylinder experiments on 0.15 wt% H₂O melts. These methods allowed viscosity determinations between 10² and 10⁷ Pa s, and cover the complete range of naturally occurring magmatic temperatures, pressures, and H₂O-contents for rhyolites.Our viscosity data, combined with those from previous studies, were modeled by an expression based on the empirical Vogel-Fulcher-Tammann equation, which describes viscosities and derivative properties (glass transition temperature T_g, fragility m, and activation volume of viscous flow Va) of silicic liquids as a function of P-T-X_(H2O). The fitted expressions do not account for composition-dependent parameters other than X_(H2O) and reproduce the entire viscosity database for silicic liquids to within 3.0% average relative error on log η (i.e. std. error of estimate of 0.26 log units).The results yield the expected strong decrease of viscosity with temperature and water content, but show variable pressure dependencies. Viscosity results to be strongly affected by pressure at low pressures; an effect amplified at low temperatures and water contents. Fragility, as a measure for the deviation from Arrhenian behavior, decreases with H₂O-content but is insensitive to pressure. Activation volumes are always largely negative (e.g., less than −10 cm³/mol) and increase strongly with H₂O-content. Variations in melt structure that may account for the observed property variations are discussed.     

Comparative toxicities of chlorinated biphenyls on sea urchin egg fertilisation and embryogenesis

The aim of this study was to compare the biological actions of selected chlorinated biphenyls (CB's) (with different degrees of chlorine substitution), using the sea urchin test system, for their ability to affect fertilisation, embryogenesis and mitotic activity. Sea urchin embryos were exposed to the test agents throughout larval development or for shorter intervals (e.g. before or after hatching). Sperm or eggs were exposed before fertilisation, thereafter the contaminants were removed from embryo cultures. The results showed maximal activities from medium-chlorinated (tetra- and hexachloro-substituted) compounds, as compared to low- and high-chlorinated biphenyls (mono-, di- and octachloro-substituted), at nominal levels ranging from 10⁻⁶m to 10⁻⁵m. This held true for the different parameters and treatment schedules. Developmental defects were only detected following post hatching exposure of embryos to CB's, whereas pre-hatching exposure failed to reveal any embryological or cytogenetic abnormalities.     

Comparison between some Hα and X-ray flares

In the present paper, H-evolutive curves of chromospheric events are compared with flux evolutive curves of X-ray events observed at the same time in different spectral regions. A correspondence between the emissions E(I _H/I _chr)'s at higher and higher H-intensity levels, and the X-ray fluxes F()'s in harder and harder -ranges is shown. Further, the present observations seem to indicate the existence of a single triggering mechanism during the flash-phase of a flare. It is also shown that these results may be in agreement with Brown's model for chromospheric flares.     

The origin of the Pedra Furada sandstone tubular structures (South of Lisbon, Portugal)

The Pedra Furada is a 12 m wide, 18 m high outcrop feature showing hundreds of ferruginised sandy tubes and looking in part like a giant organ. In this paper the origin of the tubes is explained on the basis of geochemical, petrographic and microscopic (optical and electronic) analytical data. The tubes are considered to represent vertical escape channels for overpressured water, exhibiting inward decreasing grain size due to water velocity gradients inside the escape channels. The ferruginisation is due to iron oxides associated with colloidal/clayey fine sediments and to goethite formed from solution. The overpressure of water may be due to seismically fluidised beds below the Pedra Furada outcrop or to artesian water ascent. In both cases, fault rupturing may have played a major role in the focussing of the ascending flow.     

The geography of water conflict and cooperation: internal pressures and international manifestations

Studies on transboundary water conflict and cooperation generally consider interstate relations over shared water resources as distinct from intrastate relations. While connections have been made between international water relations and regional relationships in general, it is conceivable that international water conflict and cooperation may also be influenced by domestic water events and vice versa. This paper seeks to investigate the dynamics of water interactions across geographic scale and their relationship to broader international affairs. The research approach involves the creation of an analytical framework for assessing possible linkages between external and internal interactions over freshwater resources. The framework is applied to three case studies – the Middle East, South Asia and Southern Africa – utilizing 'event data'. To validate the findings from the quantitative analyses, the results are compared with conventional qualitative understandings of water and overall relations in the three regions. The comparison demonstrates not only the efficacy of the analytical framework in general, but also highlights, at least in terms of the specific case studies selected, the disparate water dynamics across geographic regions and the importance of considering water events, both national and international, within larger political and historical contexts.     

Viscosity of hydrous Etna basalt: implications for Plinian-style basaltic eruptions

Water dissolved in a silicate melt can strongly influence its physical properties and thus magma behavior during crystallization, degassing, foaming and fragmentation. Etna is a basaltic volcano whose activity is dominated by effusive eruptions which have long represented a threat to the densely populated, surrounding area. Recently, recognition of the products of a Plinian eruption (122 B.C.) has raised further issues for hazard assessment at Etna and other basaltic volcanoes. Constraining the behavior of Etna magma under conditions relevant to both effusive and explosive hazards requires viscosity data under conditions near the glass transition. Here we have investigated the viscosity of hydrous Etna lava in order to better understand eruptive processes which characterize this volcano. The experimental methods which have been used include piston cylinder synthesis of the hydrated melts, micropenetration viscometry for low-temperature viscosity measurements, and near-infrared spectroscopy for the evaluation of sample homogeneity and measurements of water content. Additionally, scanning calorimetric determinations were performed to check whether incipient crystallization had occurred. Sample compositions were determined using electron microprobe analysis and ⁵⁷Fe Mössbauer spectroscopy. Results from this study are compared with previous reports of trachytic, phonolitic and model calc-alkaline rhyolite (HPG8) compositions. The viscosity of the basaltic melt (dry and wet) has been parameterized in terms of temperature and water content via the non-Arrhenian equation: log₁₀-=-4.643+(5,812.44-427.042H₂O)/(T(K)-499.31+28.742ln(H₂O)) where - is the viscosity in Pa s, H₂O is the water content in wt%, and T is the temperature in Kelvin. We observe that the viscosity of alkali basalt (at more than 0.5 wt% H₂O) is similar to that of an alkaline trachyte (Agnano-Monte Spina eruption, Phlegrean Fields) and much higher than that of a peralkaline phonolite (Teide, Tenerife) at similar silica contents and NBO/T. For water contents above 1.5 wt%, the viscosity of the basalt is similar to that of rhyolitic melts with similar water contents. At temperatures ranging from 1,050 to 1,150 °C and with water contents between 0.5 and 2.3 wt% (eruptive conditions), the viscosities calculated using the equation defined in this study are (1) in reasonable agreement with those calculated using Shaw's model, and (2) much lower than those experimentally determined in a previous study. However, outside these temperature and water content ranges, the agreement with Shaw's model (1972) breaks down.     

Some Morphological Aspects and Hydrological Characterization of the Tagus Floods in the Santarém Region, Portugal

In Portugal, few studies have been made of the historical floods of the RiverTagus (the longest in the Iberian Peninsula). This fact led to the study of theLower Tagus (Santarém region) using written historical documents,cartographic documents and hydrological data, consisting mainly of waterlevel records. With the support of the historical documents and the analysisof all the maps, it was possible to verify that the human intervention has beenfundamental in the morphological changes of the Tagus' channel. It becameaware that the river changed from a braided to a single channel with alternatebars. From the hydrological data, return periods for the floods were determined,using the Pearson Type 3 distribution. The selection of the most important floods,from 1855 to 1998, enabled to build a ``flood hazard scale' for this region.     

Gravimetric and magnetic fabric study of the Sintra Igneous complex: laccolith-plug emplacement in the Western Iberian passive margin

International Journal of Earth Sciences - The geometry and emplacement of the ~ 96 km2, Late Cretaceous Sintra Igneous complex (SIC, ca. 80 Ma) into the West Iberian passive...