塔里木盆地寒武系层序地层格架

通过露头、钻测井及地震层序地层特征综合分析,建立了塔里木盆地寒武系三级层序地层格架,将寒武系划分出6个可全盆地追踪与对比的三级层序。结合反映全球海平面相对变化的全岩碳同位素旋回与反映沉积古水深相对变化的沉积旋回的对比分析,可将塔里木盆地寒武系三级层序分为主要受全球海平面变化控制形成的全球海平面层序(层序CSQ2、CSQ4、CSQ5、CSQ6)及主要受地区性构造沉降作用控制形成的构造层序(层序CSQ1、CSQ3)2类。塔北轮南地区寒武系台地边缘总体呈现由早寒武世的缓坡向中—晚寒武世的镶边台地的演变以及由西向东的进积叠置型式,推测主要与寒武纪全球海平面总体微弱下降及塔里木盆地基底沉降速率总体稳定且较小有关。     

再生烃油气系统成因及全球分布

经典油气系统理论与方法主要侧重于对由烃源岩一次生烃形成的原生油气系统的研究,而对由烃源岩二次生烃或多次生烃过程所形成的特殊油气系统的研究不够。提出了再生烃油气系统的定义为:曾经有过生烃过程但因后期抬升而暂停生烃的烃源岩被再次深埋或在构造热事件的作用下,由烃源岩二次或多次生烃过程所形成的油气系统,其中的油气藏称之为再生烃油气藏。指出了再生烃油气系统的特征为:(1)具多旋回构造演化历史;(2)烃类热成熟度较高,多表现为天然气及凝析油;(3)晚期成藏;(4)油气藏规模以中小型为多,少数为大型甚至特大型;(5)油气藏分布主要受“二次生烃”或晚期生烃中心控制。对再生烃油气系统的主要形成条件进行了阐述。介绍了潜在的再生烃油气系统在中国以及全球的分布状况。     

中国海相碳酸盐岩的储层类型、勘探领域及勘探战略

中国海相碳酸盐岩有效储层成因类型主要包括古风化壳岩溶储层、礁滩储层及层状白云岩储层三大类。陆上中—古生界盆地三类储层均有分布,海上第三系盆地主要发育礁滩储层。针对我国海相油气地质特别是陆上中—古生界油气成藏的复杂性,提出应该加强对勘探及认识程度相对较低的礁滩储层形成的原生岩性-成岩圈闭油气藏的研究与勘探工作。石灰岩古风化壳岩溶储层具有强烈的非均质性,白云岩储层的含油气性比较依赖于有效储盖组合及构造圈闭。鉴于我国海相油气资源潜力巨大、勘探程度较低,故应该加强海相油气资源特别是陆上主要盆地海相油气资源及南海油气资源的研究与勘探开发,尤其要加强层序地层及岩相古地理编图等基础油气地质研究工作。     

河南商城—固始地区石炭系沉积环境及其构造意义

根据沉积相分析,同时综合分析区域地质资料,笔者提出河南商城－固始地区石炭系及安徽金寨地区梅山群为典型前陆磨拉石含煤建造,其沉积相主要为滨海、潮坪、泻湖、局限台地及砾质辫状河－冲积扇相,代表了统一的石炭纪一二叠纪合肥弧后前陆盆地的南部边缘相,说明大别地块（北大别弧）于早古生代晚期－晚古生代早期即与华北板块碰扪结成一体。     

中国含油气盆地的反转构造样式及其油气聚集

反转构造主要指伸展盆地中地堑、半地堑系统遭受挤压变形所产生的压缩构造。它一般经历拉张断陷、稳定坳陷及挤压反转三个演化阶段,构造反转形成的各种褶皱背斜构造直接叠覆在生油断陷之上,生运储配置关系得天独厚,有利于油气聚集。对我国油气勘探反转构造进行成因分类,归纳出断层型、走滑型、热力型及重力型四大类,每一类又可识别出若干种。如断层型反转褶皱,根据张性断层与压性断层的相互叠加关系,可以识别出六种:断层扩展反转褶皱,断层弯曲反转褶皱,断层滑脱反转褶皱,截断型反转褶皱,滑脱逆掩断坡型反转构造,褶皱型反转构造。其中又以断层扩展、断层弯曲、滑脱逆掩断坡和褶皱型等反转构造的含油气性最好。     

HEFEI BASIN IN EARLY CRETACEOUS -CHARACTERIZATION AND ANALYSIS OF PETROLEUM POTENTIAL

Comprehensive analyses were made based on seismic prospecting data, electrical prospecting data and basin simulation data as well as regional geological data and thorough discussions were conducted about the complicated structures, features and evolution of Hefei Basin in Early Cretaceous in this study, and it was derived that that Hefei Basin was a composite basin formed during the transformation of the stress field from compressive toward tensile in Early Cretaceous. In other words, this basin was a foreland basin of gliding-thrust type, which is mainly controlled by the Dabie orogenic belt in the south side in the early to middle period of Early Cretaceous, while being a strike-slip basin of pull-apart type, which is mainly controlled by the activity of Tanlu fracture in the east side in the middle to late period of Early Cretaceous. Moreover, the potential Lower Cretaceous oil and gas system in the pull-apart basin and the vista for its prospecting were explored in this study. Tectonism of the Tanlu fracture was further discussed based on the results of characterization of the basin, and it was pointed out that this is beneficial and instructive to the oil and gas prospecting in Hefei Basin.     

四川盆地中二叠统茅口组米兰科维奇旋回及高频层序

四川盆地中二叠统茅口组形成于中二叠世中晚期。通过分析四川盆地中二叠统茅口组露头剖面岩性特征、对比广元上寺长江沟露头剖面碳氧同位素变化趋势与沉积层序发育特征,将茅口组划分为2个可全盆地追踪的Ⅱ型三级层序,并分析了茅口组三级层序的主控因素。在此基础上,对钻穿中二叠统茅口组典型井的自然伽马能谱测井曲线开展频谱分析,识别出多种具有米兰科维奇旋回特征的高频旋回,并计算出茅口组沉积的平均速率及沉积时限等相关参数。最后,采用数字滤波消除掉其他次要旋回因素的影响而仅保留与主控因素相关的旋回信息,建立茅口组的高频层序划分方案。结果表明,茅口组三级层序在形成过程中主要受控于构造升降及全球海平面变化;茅口组米兰科维奇旋回特征明显,其中长偏心率旋回(413.0 ka)和短偏心率旋回(123.0 ka)分别是形成四级层序(准层序组)和五级层序(准层序)的主控因素,与之对应的平均旋回厚度在龙17井区分别为13.44m和4.31m,在安平1井区分别为16.03m和4.68m;茅口组大约发育15个四级层序,其发育时限大约为6.11Ma;根据构造背景曲线和长偏心率旋回曲线的叠加曲线划分高频层序,其高频层序界面更加接近实际地层的发育情况。     

浙江省火山岩地区温泉、矿泉水成因及综合开发利用

浙江省地处环太平洋火山带和中国东南沿海火山带,火山岩分布广泛。本文论述浙江省火山岩地区温泉、矿泉水的分布及其特征,分析火山岩岩性、岩石化学、构造性质及地貌因素对温泉、矿泉水形成的影响,提出火山岩地区温泉、矿泉水综合开发利用的意义,以及综合开发利用中应注意的问题。     

塔中Ⅰ号坡折带奥陶系凝析气田勘探中的古地貌学方法

针对塔中地区碳酸盐岩埋藏深度大、横向非均质性强、岩层顶面地震反射强而内幕地震反射弱且分辨率低等地震地质特点,充分利用三维地震信息,精细解释了上奥陶统桑塔木组内部地震反射强振幅、强连续等时界面和碳酸盐岩顶界面,刻画了塔中Ⅰ号坡折带奥陶系碳酸盐岩台地—陆棚边缘高能礁滩体的地貌学特征,建立了碳酸盐岩建隆的地震地质模式。该模式为全面认识该区碳酸盐岩建隆沉积体系的发育特征和分布范围提供了重要依据,并在该区奥陶系凝析气田勘探、有利勘探区带评价和储量评估中得到了成功应用,取得了良好的经济效益。     

Characteristics of Milankovitch Cycles in the Mid‐Permian Liangshan and Qixia Formations of the Sichuan Basin—Examples from Well‐Long17 and Well‐Wujia1

The Liangshan and Qixia formations in the Sichuan Basin of central China were formed in the earlier middle Permian. Based on outcrop observation of the Changjianggou section at Shangsi, Guangyuan region and 3rd-order sequence division in typical drillings, one-dimensional spectrum analysis has been used to choose the better curve between the natural gamma ray spectrometry log(ln(Th/K)) in Well-Long17 and the gamma ray log(GR) in Well-Wujia1, respectively, for identifying Milankovitch cycles in Sequence PSQ1 which comprises the Liangshan and Qixia formations, and then to identify the variation in the Milankovitch cycle sequences. On this basis, the system tract and 4th-order sequence interfaces in Sequence PSQ1 were found via two-dimensional spectral analysis and digital filtering. Finally, a high-frequency sequence division program was established. Among these cycles, long eccentricity (413.0 ka) and short eccentricity (123.0 ka) are the most unambiguous, and they are separately the major control factors in forming 4th-order (parasequence sets) and 5th-order (parasequences) sequences, with the average thicknesses corresponding to the main cycles being 11.47 m and 3.32 m in Well-Long17, and 14.21 m and 3.79 m in Well-Wujia1, respectively. In other words, the deposition rate in the beach subfacies is faster than that of the inner ramp facies. The ln(Th/K) curve is more sensitive than the GR as the index of relatively ancient water depth in carbonate deposition. One-dimensional spectrum analysis of ln(Th/K) curve could distinguish the Milankovitch cycle sequences that arose from the Precession cycle (20.90 ka), with a much higher credibility. Sequence PSQ1 in Well-Long17 contains 10 4th-order sequences, and the growth span of Sequence PSQ1 consisting of the Liangshan and Qixia formations is about 4.13 Ma. The single deposition thickness of the long eccentricity cycle sequence has the characteristics of thinning and then thickening in the two-dimensional spectrum, which could be used to identify the system tract interface of the 3rd-order sequence. The precession sequence thickness remains stationary. As a result, the early deposition rate in the mid-Permian of the Sichuan basin was very slow, remaining nearly stationary, and this reflects a sustained depositional environment. Whole-rock carbon and oxygen isotope curves could also prove this point. Milankovitch cycle sequence studies provide a basis for paleoenvironmental analysis and, as such, can be used to analyze ancient climate change, calculate deposition rate and deposition time, and carry out fine isochronous stratigraphic correlation.