舟山国家石油储备基地堆载预压加固效果分析

介绍了舟山国家石油储备基地试验区软基堆载预压大型现场试验结果,根据现场试验测得的数据,分析了软土地基堆载预压下沉降变化规律、分层沉降变化规律、深层土体位移变化规律、超静孔隙水压力变化规律,进一步探讨了根据应力和应变分析得到的地基固结性状,其中通过应变分析得到适用于储备基地的沉降经验系数m。结果表明,打设塑料排水板结合堆载预压处理软弱地基具有良好的效果。     

从统计分析看控制东海重矿物分布的因素

任何地质作用过程都是复杂的,东海也不例外,其沉积过程具有长期性、继承性和叠加性的特点.因而反映在矿物组合及其分布变化上较为复杂,影响因素颇多.然而,运用数学地质方法却可帮助我们寻找和确定其主要的影响因素,查明它们的相互关系,甚至建立定量描述的模式.而这正是传统地质学研究中的难题之一.     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

翅碱蓬(Suaeda heteroptera)根际与非根际沉积物常见重金属总量及化学形态变化

原子吸收光谱法和等离子光谱法分别研究了潮滩盐沼植物翅碱蓬(Suaedaheterop-tera)根际与非根际(根上部和根下部)沉积物中Cu、Zn、Pb和Cd的总量和化学形态。结果表明,从总量来看,不同潮滩沉积物中4种重金属次序均为Zn>Pb>Cu>Cd,但同一元素随潮滩位置变化明显,尤以中潮滩差异最显著,重金属总量明显大于其他两个潮滩(低潮滩和高潮滩),特别是根际沉积物中的重金属总量远高于非根际沉积物总量,其比值分别为Cu3·4—4·2倍,Zn2·2—2·7倍,Pb3·2—3·3倍。同一潮滩均表现为根际沉积物>根上部>根下部。Cd含量相对较低,其变化不明显。从化学形态看,沉积物重金属表现为环境直接影响态(交换态和有机结合态)、环境间接影响态(碳酸盐态和铁锰氧化物态)和稳定态(残渣态)。与非根际沉积物相比,根际沉积物中重金属的化学形态发生了显著的变化,Cu和Pb以稳定态为主,其次为环境间接影响态,环境直接影响态最低;Zn与上述2种金属不同,以环境直接影响态含量最高(可交换态是有机结合态的7倍),其次分别为环境间接影响态(主要是碳酸盐结合态)和稳定态。实验结果表明,由于特异根圈效应,一方面该植物使可迁移形态的Cu和Pb在根际逐步得到矿化,使其生物可利用性降低;另一方面使Zn的生物可利用性提高,促进了植物对Zn的吸收利用。     

草酰胺合铜(Ⅱ)单核配合物的热分解动力学研究

应用TG-DTG-DTA热分析技术研究了N，N’-双(2-氨丙基)草酰胺合铜(Ⅱ)单核配合物在空气气氛中的热行为；分别用微分法(Achar法)和积分法(Coats-Redfen法)对其非等温TG数据进行了解析。通过对热分解动力学参数的对比分析，提出了该配合物热分解反应机理；根据TG曲线计算出了E，lnA和S^*，并由动力学补偿效应获得了E与lnA的数学表达式。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

水平井含水率上升影响因素

利用塔里木油田塔中4油田(TZ4)底水油藏相关的地质、流体数据建立数值模型。在所建模型的基础上,应用数值模拟计算的累积产油、产水和产液量回归俞启泰水驱特征曲线,以反映水平井见水特征的参数b。以参数b为研究对象,采用正交试验的方法研究不同因素对b值的影响,筛选影响水平井见水特征的主要因素,认为原油粘度、油层厚度、非均质性及水平井水平段在油藏中的位置是影响水平井含水上升趋势的主要指标。最后建立主要因素与b值的关系式,结合俞启泰曲线b值图版,提出预测水平井见水规律的公式——图版法(F-b法)。应用F-b法对塔里木水平井含水率进行预测,并与其他相关方法及实际生产数据对比,认为F-b法可作为预测塔里木油田水平井含水率、估算可采储量的一种有效方法。     

基于ArcGIS的1:5万DLG数据库生成地形图的设计与实现

探讨在ArcGIS环境下利用1:5万DLG数据库直接生成地形图的若干关键技术,如定制1:5万DLG符号库、符号配置,并给出地形图生产的完整的工艺流程,这样能够缩短1:5万地形图的成图周期,提高工作效率。     

连续运行GPS定位服务系统的探讨

介绍了连续运行GPS定位服务的概念、实现模式及其在测绘行业中的应用。