An Early Cretaceous slab window beneath central Tibet,SW China: Evidence from OIB‐like alkaline gabbros in the Duolong area

The geodynamic mechanism of the late Early Cretaceous magmatic flare‐up in the collisional zone between the Lhasa and Qiangtang terranes in Tibet is controversial because of a scarcity of robust evidence. To address this problem, we report geochronological, geochemical and Hf isotopic data for the newly discovered Gufeng gabbros from the Duolong Cu–Au mineral district of the western Bangong–Nujiang Suture Zone (BNSZ). The gabbro samples, dated at 126.3 ± 1.8 Ma, show geochemical similarities to typical ocean island basalt (OIB) and have positive εHf(t) values of +3.3 to +6.9. The gabbros were generated by decompression melting of deep upwelling asthenosphere. This event is best explained by slab break‐off and the resultant development of a slab window beneath central Tibet.     

Directional interpolation infinite element for dynamic problems in saturated porous media

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

应用ATA的对数周期馈源方案于FAST的可能性探讨

介绍应用于美国凤凰计划的Allen望远镜阵(ATA)的对数周期馈源(LPA)概况，初步给出此种馈源的基本参数及性能，仿真估算了其驻波比和方向图，并结合正在进行中的我国500m孔径球面射电望远镜(FAST)计划，探讨了应用这种宽带馈源的可能性及其限制。     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

等离子体质谱法测定玄武岩中微量元素三种样品预处理方法的比较

在测定玄武岩的微量元素时,为了保证得到的微量元素结果反映源区特征,需经预处理去除玄武岩的孔洞中充填的碳酸盐等物质。选取雷州半岛新生代玄武岩三个样品,每一个样品用三种预处理方法进行预处理,等离子体质谱法测定其中的微量元素。分析结果表明,用稀硝酸浸泡样品,会导致玄武岩中大多数微量元素严重丢失,得到的数据失真;而用稀盐酸浸泡去除碳酸盐的方法基本不改变玄武岩中微量元素的含量。     

一类可转债的定价模型的实证研究

在只考虑赎回条款条件下,通过引入巴黎期权特性,给出了可转债的定价模型.并利用Crank-Nicolson有限差分格式以及Gsuss-Seidel遮代方法求解该模型.以实际交易日敷作为时间变量的节点数,再以可转债的市场价格作为股价变量的节点之一,构造网格,对招行转馈进行实证研究,得到其价格路径.结果表明,模型价格略低于市场价格,两者走势基本保持一致,在非转股期,平均偏差为9.138 2%.而进入转股期后为3.395 4%,总平均偏差为4.873 3%,拟合度高.     

阜新—朝阳高速公路段黄土三轴剪切特性研究

对取自阜新—朝阳高速公路段的黄土进行了14C测年、颗粒分析、湿陷及常规试验等,对比分析了其基本特性,通过三轴剪切试验,获得了不同含水量的黄土剪切孔压、固结孔压、抗剪强度及剪切变形的变化特征。分析认为,辽西黄土此类特性由黄土的物质成分和结构特征所决定。对不同含水量的黄土剪切变形曲线建立力学模型,拟合结果表明,对于脆性破坏的应变软化曲线,刘祖典模型描述的效果并不理想,而文中建议的经验模型则较为适合。     

中国东北依兰地区块状蓝片岩的地球化学特征

黑龙江省依兰地区分布的黑龙江杂岩被认为足具有缝合带性质的构造混杂岩,其中所含变基性火山熔岩中含有的变质矿物不具有定向组构特征,因此称之为块状蓝片岩.特征变质矿物--蓝闪石的大量出现表明其经历过高压低温变质作用.常量地球化学分析表明,其SiO2含量均在53%以下,TiO2含量超过2%,Na2O K2O的含量为2.77%～6.41%,Na2O的含量普遍大于K2O的含量,Na2O K2O-SiO2变异图显示其具有碱性玄武岩特征;痕量元素地球化学分析显示其轻重稀土元素分异明显,稀土元素配分曲线表现为轻稀土元素富集、重稀土元素亏损的右倾型.球粒陨石标准化图解中,不具有Eu的负异常;Nbx2-Zr/4-Y、Ti/100-Zr-Sr/2与Ba-Th-Nb-La图解的综合分析表明,块状蓝片岩具有碱性洋岛玄武岩(OIB)的特征,它们应是佳木斯地块与松嫩地块之间古洋壳俯冲过程的残留,这为探讨佳木斯陆块与松嫩陆块之间古老洋盆俯冲消减过程提供了重要依据.     

基于Web＆GIS的洪水预报技术概述

洪水预报技术涉及专业技术和实现技术两个方面,洪水预报实现技术的发展制约着洪水预报的整体水平.基于GIS及Web的洪水预报应用技术,代表了洪水预报技术发展的一个新的方向,主要体现在三个方面:构件化应用开发的洪水预报系统;建立分布式洪水预报模型;交互式洪水预报调度决策应用模式.技术关键在于洪水预报中间件和相应应用中间件标准,其次是规范构件化应用;三是推进应用级服务体系,支持行业应用的构件化软件开发.