Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

A MESO-β SCALE SIMULATION OF THE EFFECTS OF BOREAL FOREST ECOSYSTEM ON THE LOWER ATMOSPHERE

Based on the Intensive Field Campaign(IFC-1)data of Boreal Ecosystem-Atmosphere Study(BOREAS).a three-dimensional meso-β scale model is used to simulate the effect of boreal forests onthe lower atmosphere.A fine horizontal resolution of 2 km×2 km is used in order to distinguish thevegetative heterogeneity in the boreal region.A total of 20×25 grid points cover the entire sub-modeling area in BOREAS' South Study Area(SSA).The ecosystem types and their coverage ineach grid square are extracted from the North American Land Cover Characteristics Data Base(NALCCD)generated by the U.S.Geographical Survey(USGS)and the University of Nebraska-Lincoln(UNL).The topography of the study area is taken from the Digital Elevation Map(DEM)of USGS.The model outputs include the components of the energy balance budget within the canopyand at the ground.the turbulence parameters in the atmospheric boundary layer and the wind.temperature and humidity profiles extending up to a height of 1500 m.In addition to the fine timeand spatial step,the unique feature of the present model is the incorporation of both dynamic andbiological effects of the Boreal forest into the model parameterization scheme.The model resultscompare favorably with BOREAS' IFC-1 data in 1994 when the forest was in the luxuriant growingperiod.     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

藏北南羌塘盆地毕洛错地区下侏罗统曲色组石膏岩层

对西藏自治区北部南羌塘盆地毕洛错地区下侏罗统曲色组石膏岩层进行了研究。根据岩石地层和生物地层资料,确认毕洛错地区的石膏岩层和油页岩为曲色组的一部分,地质时代为早侏罗世,并确认下侏罗统曲色组在区域上可能是寻找油气、油页岩资源的重要层位之一。     

欧盟RoHS指令与中国的对策

对欧盟RoHS指令的主要内容进行了简述,初步介绍了与RoHS指令相似或者相关的各国的环保指令,讨论了RoHS指令等对我国电子电气行业带来的巨大冲击。简要总结我国电子信息产业部、国家质量监督检验检疫总局、商务部等各管理及技术部门为了应对RoHS指令和提高我国电子电气行业竞争力而作出的相应对策。     

A new form of generalized Boussinesq equations for varying water depth

A new set of equations of motion for wave propagation in water with varying depth is derived in this study. The equations expressed by the velocity potentials and the wave surface elevations include first-order non-linearity of waves and have the same dispersion characteristic to the extended Boussinesq equations. Compared to the extended Boussinesq equations, the equations have only two unknown scalars and do not contain spatial derivatives with an order higher than 2. The wave equations are solved by a finite element method. Fourth-order predictor–corrector method is applied in the time integration and a damping layer is applied at the open boundary for absorbing the outgoing waves. The model is applied to several examples of wave propagation in variable water depth. The computational results are compared with experimental data and other numerical results available in literature. The comparison demonstrates that the new form of the equations is capable of calculating wave transformation from relative deep water to shallow water.     

扇贝的养殖环境及其体内的细菌学分析

自1992年9月～1994年11月，对青岛胶州湾养殖的扇贝及环境中的细菌组成和某些生态学特性进行了调查。养殖区表层海水中异养菌和弧菌平均数各波动于（21．2～39．7）×102／cm3和（7．3～19．2）×102／cm3之间。其中1号和4号站位的菌数比其它越位都高，这和它们靠近码头，受到附近的排水污染有关。在扇贝的消化盲囊和性腺内也分离到异养菌和弧菌，分别为103～105个g和103～105个／g。这些细菌可能因扇贝遇到环境改变防御能力下降时，扩散到其它器官并大量繁殖，因而造成感染而死亡。从对分离菌的药物敏感试验结果看，近年一些菌株对原来敏感的药物产生了抗药性，如四环索和链霉素，今后在育苗过程中避免滥用抗菌药物是十分重要的。     

基于网络药理学探究补阳还五汤治疗颈椎病的作用机制

目的：基于网络药理学与分子对接技术分析补阳还五汤治疗颈椎病的作用机制。方法：使用TCMSP、化学专业数据库获取补阳还五汤的活性成分,并对潜在靶点进行预测及规范。分别从PharmGKB、DisGeNET、OMIM、GeneCards数据库中得到颈椎病疾病靶点,利用韦恩图获取补阳还五汤与颈椎病的交集靶点。通过CytoScape软件构建中药-活性成分-疾病靶点和蛋白质-蛋白质相互作用（PPI）网络,获得核心有效成分与关键靶点,利用David数据库对潜在靶点进行富集分析。最后运用AutoDock Vina软件对补阳还五汤核心有效成分与关键靶点进行分子对接验证。结果：共获得补阳还五汤治疗颈椎病的有效活性成分97个,包括槲皮素、山柰酚、黄芩素、木犀草素等;交集靶点64个,关键靶点有白细胞介素-6（IL-6）、肿瘤坏死因子（TNF）、丝氨酸/苏氨酸蛋白激酶1（AKT1）、白细胞介素-1B（IL-1B）等;主要涉及肿瘤坏死因子（TNF）、白细胞介素-17（IL-17）、磷脂酰肌醇3-激酶（PI3K）/蛋白激酶B（Akt）等信号通路,分子对接结果显示核心有效成分与关键靶点之间结合紧密,为补阳还五汤治疗颈椎病提供相应条件。结论：该研究在总体上预测了补阳还五汤治疗颈椎病的活性成分、靶点和信号通路,作用途径广泛,为下一步的临床应用提供参考及思路。