The testing of a synthetic aperture technique, the ETAM algorithm, is extended and its performance for CW pseudorandom signals and broadband ship noise is examined. The results show the limitations of the technique and are of special interest for operational systems development. In the CW experiments, the transmitted signal was generated with high temporal coherence, and loss of the spatial and temporal coherence of the received signal was introduced only by the medium and the stability of the towed array. In the experiments that included the pseudorandom signal and the ship noise, the temporal coherence of the transmitted signals was deliberately chosen to be poor in order to study the effects and the performance of this algorithm with broadband signals. The related experimental results show that for received signals, which have their segments over the synthesizing period highly cross-correlated, a synthetic aperture array gain was achieved that corresponds to the length of an equivalent fully populated array 相似文献
The entire pile of nappes in the eastern margin of the Bohemian massif is characterized by two stages of Variscan nappe emplacement each exhibiting a different kinematic and metamorphic evolution.The older emplacement (D1) probably occurred around 350-340 Ma ago and was synmetamorphic. The nappes show a typical systematic superposition of higher grade metamorphic units over lower grade ones. Thus, the crystalline complexes showing a HT-MP Barrovian imprint (Svratka allochthonous unit and Moldanubicum) were thrust over an intermediate unit affected by MTMP recrystallization (Bíte orthogneiss and its country rock), and at the base of the D1 nappe pile the Inner Phyllite Nappe (Biý Potok Unit) is characterized by LT/LP metamorphism.The second stage of tectonic evolution (D2) is characterized by a thin-skinned northward-oriented nappe emplacement that occurred under LT-LP conditions dated at 320-310 Ma. The whole nappe sequence formed during the first tectonometamorphic period (D1) was transported northward over the autochthonous »Deblín polymetamorphic and granitic complex« of Upper Proterozoic age and its Devonian sedimentary cover with very low metamorphism. During this second tectonic event the Brno granite massif (580 Ma) was only marginally incorporated in the Variscan nappe tectonics which resulted in kilometer-scale cover and basement duplexes. The tectonic evolution of the nappe pile ended with stage D3, represented by large- to medium-scale east-vergent folds with limited displacement.
Zusammenfassung Der Deckenbau am Ostrand der Böhmischen Masse erfolgte in zwei aufeinanderfolgenden Stadien, die sich sowohl in ihrer Kinematik als auch in ihrer Metamorphoseentwicklung deutlich voneinander unterschieden.Die ältere Phase (D1 ca. 350-340 Ma) ist durch synmetamorphe Überschiebungen charakterisiert. Sie führt zu einer metamorphen Inversion der überschobenen Deckeneinheiten, so daß generell hohe metamorphe Einheiten schwach metamorphe tektonisch überlagern. Der Svratka Komplex und das Moldanubikum als hangendste Decken sind durch MP/HT Paragenesen vom Barrow-Typ gekennzeichnet. Beide Einheiten sind auf den MP/MT-metamorphen Bite-Gneis und seine Rahmengesteine überschoben. Die Bílý potok Einheit als liegende Decke zeigt nur noch eine LP/ LT Regionalmetamorphose.Das jüngere Stadium (D2 ca. 320-310 Ma) ist durch eine Thin-skinned Tektonik mit nordvergentem Deckentransport unter LP/LT Bedingungen charakterisiert. Der gesamte, invers metamorphe D1-Deckenstapel wird dabei nach N über den autochtonen Deblín Komplex bzw. seine devonische Sedimenthülle überschoben.Das Brno Granit Massiv (580 Ma) wird nur randlich in diesen variszischen Deckenbau einbezogen. Die tektonische Entwicklung endet mit einem mittel bis großräumigen E-vergenten Faltenbau (D3 phase).
Résumé L'empilement des nappes a la bordure orientale du Massif de Bohème est caractérisé par deux stades de mise en place présentant différentes évolutions cinématiques et métamorphiques.La tectonique majeure de mise en place des nappes crustales intervient lors d'un métamorphisme de type barrowien, calé autour de 350-340 Ma. L'empilement qui en résulte montre une superposition systématique d'unités à fort degré de métamorphisme sur des unités moins métamorphiques. Ainsi les complexes cristallins, montrant des reliques de métamorphisme de haute à moyenne pression-haute température (unités cristallines de Svratka et du Moldanubien), chevauchent une unité intermédiaire affectée par un métamorphisme de moyenne à basse pression-moyenne température (l'orthogneiss de Bíte et son encaissant). A la base de cette pile édifiée durant la tectonique D1, l'unité des phyllites internes (unité de Bílý potok) est caractérisée par un métamorphisme de basse témperature-basse pression.Le second stade D2 de l'évolution tectonique est caractérisé par une tectonique pelliculaire à vergence nord datée à 320-310 Ma. L'empilement résultant de D1 est ainsi transporté vers le nord, au dessus du complexe autochtone d'âge protérozoïque supérieur (groupe de Deblín) et sa couverture sédimentaire dévonienne très faiblement métamorphisée.Le massif granitique de Brno (580 Ma) n'est que marginalement incorporé à cette tectonique de nappe varisque. Ceci se traduit par des duplex socle-couverture d'échelle plurikilométrique. L'évolution tectonique s'achève lors d'une troisième phase, marquée par de grands plis à vergence est. Le déplacement associé est alors d'amplitude limitée.
CO2 inclusions with density up to 1,197 kg m−3 occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO2 as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO2 phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km−1) and the CO2–CH4–N2 fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover. 相似文献
Current land-use classifications used to assess urbanization effects on stream water quality date back to the 1980s when limited information was available to characterize watershed attributes that mediate non-point source pollution. With high resolution remote sensing and widely used GIS tools, there has been a vast increase in the availability and precision of geospatial data of built environments. In this study, we leverage geospatial data to expand the characterization of developed landscapes and create a typology that allows us to better understand the impact of complex developed landscapes across the rural to urban gradient. We assess the ability of the developed landscape typology to reveal patterns in stream water chemistry previously undetected by traditional land-cover based classification. We examine the distribution of land-cover, infrastructure, topography and geology across 3876 National Hydrography Dataset Plus catchments in the Piedmont region of North Carolina, USA. From this dataset, we generate metrics to evaluate the abundance, density and position of landscape features relative to streams, catchment outlets and topographic wetness metrics. While impervious surfaces are a key distinguishing feature of the urban landscape, sanitary infrastructure, population density and geology are better predictors of baseflow stream water chemistry. Unsupervised clustering was used to generate a distinct developed landscape typology based on the expanded, high-resolution landscape feature information. Using stream chemistry data from 37 developed headwater catchments, we compared the baseflow water chemistry grouped by traditional land-cover based classes of urbanization (rural, low, medium and high density) to our composition and structure-based classification (a nine-class typology). The typology based on 22 metrics of developed landscape composition and structure explained over 50% of the variation in NO3−-N, TDN, DOC, Cl−, and Br− concentration, while the ISC-based classification only significantly explained 23% of the variation in TDN. These results demonstrate the importance of infrastructure, population and geology in defining developed landscapes and improving discrete classes for water management. 相似文献
This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.
Policy relevance
After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies. 相似文献
Aviation constitutes about 2.5% of all energy-related CO2 emissions and in addition there are non-CO2 effects. In 2016, the ICAO decided to implement a Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) and in 2017 the EU decided on faster emission reductions in its Emissions Trading System (EU ETS), which since 2012 includes the aviation sector. The effects of these policies on the expected development of air travel emissions from 2017 to 2030 have been analyzed. For the sample country Sweden, the analysis shows that when emissions reductions in other sectors are attributed to the aviation sector as a result of the EU ETS and CORSIA, carbon emissions are expected to reduce by ?0.8% per year (however if non-CO2 emissions are included in the analysis, then emissions will increase). This is much less than what is needed to achieve the 2°C target. Our analysis of potential national aviation policy instruments shows that there are legally feasible options that could mitigate emissions in addition to the EU ETS and CORSIA. Distance-based air passenger taxes are common among EU Member States and through increased ticket prices these taxes can reduce demand for air travel and thus reduce emissions. Tax on jet fuel is an option for domestic aviation and for international aviation if bilateral agreements are concluded. A quota obligation for biofuels is a third option.Key policy insights
Existing international climate policies for aviation will not deliver any major emission reductions.
Policymakers who want to significantly push the aviation sector to contribute to meeting the 2°C target need to work towards putting in place tougher international policy instruments in the long term, and simultaneously implement temporary national policy instruments in the near-term.
Distance-based air passenger taxes, carbon taxes on jet fuel and quota obligations for biofuels are available national policy options; if they are gradually increased, and harmonized with other countries, they can help to significantly reduce emissions.
This paper presents the study on two continuous glacio-lacustrine sedimentary deposits, Laotanfang (3 597 m) and Shibantang (3 689 m) located on the southern and northern sides of Hulifang peak in Yunan, China. Environmental change indexes are constructed for each deposit, based on grain size, geochemical and pollen analysis, environmental magnetic susceptibility, and 14C dating. The study of climatic environmental change since the Holocene epoch in this region shows that the climate fluctuated at different stages during the early Holocene, that is, the climate was cool and wet during 8.4-7. 7r ka, cold and wet during 7.7-6. 5 ka, cold and dry during 6. 5-4.7 ka, cool and wet during 4.7-2. 1 ka, warm and wet during 2. 1-1.0 ka, and warmer and wet since 1 ka. These findings reflect the overlapping influences of the southwest and southeast monsoons in different times during the Holocene in the north part of southwestern China are in accord with other Holocene climate change models in this part of China. 相似文献
Climatic changes have altered surface water regimes worldwide, and climate projections suggest that such alterations will continue. To inform management decisions, climate projections must be paired with hydrologic models to develop quantitative estimates of watershed scale water regime changes. Such modeling approaches often involve downscaling climate model outputs, which are generally presented at coarse spatial scales. In this study, Coupled Model Intercomparison Project Phase 5 climate model projections were analyzed to determine models representing severe and conservative climate scenarios for the study watershed. Based on temperature and precipitation projections, output from GFDL‐ESM2G (representative concentration pathway 2.6) and MIROC‐ESM (representative concentration pathway 8.5) were selected to represent conservative (ΔC) and severe (ΔS) change scenarios, respectively. Climate data were used as forcing for the soil and water assessment tool to analyze the potential effects of climate change on hydrologic processes in a mixed‐use watershed in central Missouri, USA. Results showed annual streamflow decreases ranging from ?5.9% to ?26.8% and evapotranspiration (ET) increases ranging from +7.2% to +19.4%. During the mid‐21st century, sizeable decreases to summer streamflow were observed under both scenarios, along with large increases of fall, spring, and summer ET under ΔS. During the late 21st century period, large decreases of summer streamflow under both scenarios, and large increases to spring (ΔS), fall (ΔS) and summer (ΔC) ET were observed. This study demonstrated the sensitivity of a Midwestern watershed to future climatic changes utilizing projections from Coupled Model Intercomparison Project Phase 5 models and presented an approach that used multiple climate model outputs to characterize potential watershed scale climate impacts. 相似文献
A numerical wave flume is constructed based on the Reynolds Averaged Navier-Stokes (RANS) equations with turbulence closure by a modified k-ε model to study the viscous interactions of waves with vertical breakwaters for different overtopping cases. The governing equations,the turbulence model,boundary conditions,and solution method for the numerical wave flume are introduced briefly. The reliability of the numerical wave flume is examined by comparing the numerical results with the experimental measurement... 相似文献