Mineralogy and temperature of crater Haulani on Ceres

We investigate the region of crater Haulani on Ceres with an emphasis on mineralogy as inferred from data obtained by Dawn's Visible InfraRed mapping spectrometer (VIR), combined with multispectral image products from the Dawn Framing Camera (FC) so as to enable a clear correlation with specific geologic features. Haulani, which is one of the youngest craters on Ceres, exhibits a peculiar “blue” visible to near‐infrared spectral slope, and has distinct color properties as seen in multispectral composite images. In this paper, we investigate a number of spectral indices: reflectance; spectral slopes; abundance of Mg‐bearing and NH₄‐bearing phyllosilicates; nature and abundance of carbonates, which are diagnostic of the overall crater mineralogy; plus a temperature map that highlights the major thermal anomaly found on Ceres. In addition, for the first time we quantify the abundances of several spectral endmembers by using VIR data obtained at the highest pixel resolution (~0.1 km). The overall picture we get from all these evidences, in particular the abundance of Na‐ and hydrous Na‐carbonates at specific locations, confirms the young age of Haulani from a mineralogical viewpoint, and suggests that the dehydration of Na‐carbonates in the anhydrous form Na₂CO₃ may be still ongoing.     

Ceres's global and localized mineralogical composition determined by Dawn's Visible and Infrared Spectrometer (VIR)

The Visible and Infrared Spectrometer (VIR) instrument on the Dawn mission observed Ceres’s surface at different spatial resolutions, revealing a nearly uniform global distribution of surface mineralogy. Clearly, Ceres experienced extensive water‐related processes and chemical differentiation. The surface is mainly composed of a dark component (carbon, magnetite?), Mg‐phyllosilicates, ammoniated clays, carbonates, and salts. The observed species suggest endogenous, global‐scale aqueous alteration. While mostly uniform at regional scale, Ceres’s surface shows small localized areas with different species and/or variations in abundances. Few local exposures of water ice are seen, especially at higher latitudes. Sodium carbonates have been identified in several areas on the surface, notably in Occator bright faculae. Organic matter has also been discovered in several places, most conspicuously in a large area close to the Ernutet crater. The observed mineralogies, with the presence of ammoniated species and sodium salts, have a strong resemblance to materials found on other bodies of the outer solar system, such as Enceladus. This poses some questions about the original material from which Ceres accreted, suggesting a colder environment for such material with respect to Ceres’s present position.     

Role of African–Eurasian plate setting in the felt areas of intermediate‐depth earthquakes: an investigation using crowdsourced data

Greek intermediate‐depth earthquakes, occurring in the subducted plate of the Hellenic Arc, are felt at greater distances than expected, reaching Italy in some cases. We study in detail macroseismic intensity data from intermediate‐depth Italian and Greek earthquakes collected from Internet users who felt the shaking in Italy. The huge amount of data allowed us to outline the felt/not‐felt limit and to find a correspondence between attenuation areas and the presence of asthenospheric material at shallow depths. We show that plate boundaries, known to produce the majority of earthquakes, are, in some specific cases, the boundaries of areas in which earthquakes are felt. The Ionian subducted lithosphere propagates seismic waves with low attenuation over large distances, whereas high‐attenuation zones in Italy, linked to asthenospheric upwelling, limit the propagation, as evidenced also by PGA values. We identify a typical pattern that can be used to recognize intermediate‐depth earthquakes, and to properly locate historical events.     

Coastal processes and environmental hazards: the Buenos Aires (Argentina) and Venetian (Italy) littorals

The Buenos Aires (Argentina) and Venice (Italy) coastlands have experienced significant saltwater contamination of the phreatic aquifer, coastal erosion, hydrodynamic changes and relative sea level rise processes due to natural and man-induced factors. These factors expose coastal areas to morpho-hydro-geological hazards, such as soil desertification, frequency and degree of flooding, littoral erosion, and the silting of river mouths and channels. Man-made interventions and actions, such as beach mining, construction of coastal structures and exploitation of aquifers without an adequate knowledge of the hydrology setting and an adequate management program, worsen these natural hazards. Uncontrolled human activity induces environmental damage to the overall coastal plains. The coastal plains play an important role in the social/economic development of the two regions based on land use, such as agriculture, horticulture, breeding, and tourism, as well as industry. Results of investigations on saltwater contamination, sea level rise and morphological changes recently performed in these two coastal areas are presented here.     

通过对调查数据的趋势和多变量分析确定宏观场

通过多变(相关分析)和趋势分析等统计方法对宏观调查数据进行了解释.这种方法使我们通过评定不同宏观效应叠加的程度、估计调查数据的不确定性更客观地评定烈度.通过滤波确定烈度场的区域分量,使我们消除观测中的局部变化.给出了选取适当滤波参数的准则.本文应用这一方法对发生在意大利的一次地震的调查数据进行了处理.     

Correlations between VIMS and RADAR data over the surface of Titan: Implications for Titan’s surface properties

We apply a multivariate statistical method to Titan data acquired by different instruments onboard the Cassini spacecraft. We have searched through Cassini/VIMS hyperspectral cubes, selecting those data with convenient viewing geometry and that overlap with Cassini/RADAR scatterometry footprints with a comparable spatial resolution. We look for correlations between the infrared and microwave ranges the two instruments cover. Where found, the normalized backscatter cross-section obtained from the scatterometer measurement, corrected for incidence angle, and the calibrated antenna temperature measured along with the scatterometry echoes, are combined with the infrared reflectances, with estimated errors, to produce an aggregate data set, that we process using a multivariate classification method to identify homogeneous taxonomic units in the multivariate space of the samples.In medium resolution data (from 20 to 100 km/pixel), sampling relatively large portions of the satellite’s surface, we find regional geophysical units matching both the major dark and bright features seen in the optical mosaic. Given the VIMS cubes and RADAR scatterometer passes considered in this work, the largest homogeneous type is associated with the dark equatorial basins, showing similar characteristics as each other on the basis of all the considered parameters.On the other hand, the major bright features seen in these data generally do not show the same characteristics as each other. Xanadu, the largest continental feature, is as bright as the other equatorial bright features, while showing the highest backscattering coefficient of the entire satellite. Tsegihi is very bright at 5 μm but it shows a low backscattering coefficient, so it could have a low roughness on a regional scale and/or a different composition. Another well-defined region, located southwest of Xanadu beyond the Tui Regio, seems to be detached from the surrounding terrains, being bright at 2.69, 2.78 and 5 μm but having a low radar brightness. In this way, other units can be found that show correlations or anti-correlations between the scatterometric response and the spectrophotometric behavior, not evident from the optical remote sensing data.     

The light curve of asteroid 2867 Steins measured by VIRTIS-M during the Rosetta fly-by

On 5 September 2008, the Rosetta spacecraft encountered the asteroid 2867 Steins on its way to the comet 67P/Churyumov-Gerasimenko. This was the first of two planned asteroid fly-bys performed by the probe, the second fly-by being with the much larger asteroid 21 Lutetia in July 2010. The VIRTIS imaging spectrometer (IFOV 0.250 mrad, overall spectral range 0.25-5.1 μm) onboard Rosetta acquired data of Steins already before the closest approach phase, when the target was spatially unresolved, in order to obtain a light curve of the asteroid in the infrared spectral range extending up to 5 μm, that was never explored before. The VIRTIS light curve campaign started at 11:30 UTC onboard time, when the spacecraft was about 221,377 km away from the target, and ended at 17:58 UTC, at a distance of 20,741 km away from Steins. During this timeframe, the solar phase angle of the asteroid was roughly constant, ranging from 38.2° to 36.3°.Assuming the most recent value derived for the rotational period of Steins (Lamy et al., 2008), the VIRTIS observations covered slightly more than one rotation of the asteroid. In this interval, VIRTIS collected 8 hyperspectral cubes where Steins was captured 119 times, both in the visual and in the infrared range. Given the low signal and the unresolved appearance of the source, for which the instrument was not designed, only a small subset of wavelengths turned out to be suitable to sample the light curve. Nevertheless, in both the VIS and NIR ranges we find a similar trend, with two different maxima and minima during one rotational period, and amplitudes consistent with the results in the visual range obtained in previous works, including the data set acquired by the OSIRIS camera onboard Rosetta. We also report the presence of a new broad feature centered at approximately 0.81-0.82 μm, which is seen in the visual data throughout the rotation of the asteroid.     

Web-based macroseismic survey in Italy: method validation and results

A new method of macroseismic surveys, based on voluntary collaboration through the Internet, has been running at the Istituto Nazionale di Geofisica e Vulcanologia (INGV) since July 2007. The macroseismic questionnaire is addressed to a single non-specialist; reported effects are statistically analysed to extrapolate a probabilistic estimate of Mercalli Cancani Sieberg and European Macroseismic Scale intensities for that observer. Maps of macroseismic intensity are displayed online in almost real time and are continuously updated when new data are made available. For densely inhabited zones, we have received reports of felt effects for even very small events (M = 2). Six earthquakes are presented here, showing the ability of the method to give fast and interesting results. The effects reported in questionnaires coming from three towns are carefully analysed and assigned intensities are compared with those derived from traditional macroseismic surveys, showing the reliability of our web-based method.