Dynamic modelling of retrogressive landslides with emphasis on the role of clay sensitivity

This paper presents a detailed numerical study of the retrogressive failure of landslides in sensitive clays. The dynamic modelling of the landslides is carried out using a novel continuum approach, the particle finite element method, complemented with an elastoviscoplastic constitutive model. The multiwedge failure mode in the collapse is captured successfully, and the multiple retrogressive failures that have been widely observed in landslides in sensitive clays are reproduced with the failure mechanism, the kinematics, and the deposition being discussed in detail. Special attention has been paid to the role of the clay sensitivity on each retrogressive failure as well as on the final retrogression distance and the final run‐out distance via parametric studies. Moreover, the effects of the viscosity of sensitive clays on the failure are also investigated for different clay sensitivities.     

On the Nonlinear Thermal Evolution of Solar Corona Structures

The thermal evolution of structures is investigated for different values of the size of structure. A simplified cooling function and a constant heating mechanism are assumed. Analytical criteria for thermal instability are obtained. It is found that the response of the thermal structure not only depends on the amplitude of the disturbances, but also on whether the disturbance increases or decreases the initial steady temperature. Additionally, the evolution of the structure is examined numerically by using a time-dependent code under the assumption that the inertia terms are small. In particular, the analytical criteria obtained for thermal instability are verified.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Mineralogy and geochemistry of platinum-group elements in the Aguablanca Ni-Cu deposit (SW Spain)

Summary The Aguablanca Ni-Cu-(PGE) magmatic sulphide deposit is associated with a magmatic breccia located in the northern part of the Aguablanca gabbro (SW, Iberia). Three types of ores are present: semi-massive, disseminated, and chalcopyrite-rich veined ore. The principal ore minerals are pyrrhotite, pentlandite and chalcopyrite. A relatively abundant platinum-group mineral (PGM) assemblage is present and includes merenskyite, melonite, michenerite, moncheite and sperrylite. Moreover, concentrations of base and precious metals and micro-PIXE analyses were obtained for the three ore-types. The mineralogy and the mantle-normalised chalcophile element profiles strongly suggest that semi-massive ore represents mss crystallisation, whereas the disseminated ore represents an unfractionated sulphide liquid and the chalcopyrite-rich veined ore a Cu-rich sulphide liquid. Palladium-bearing minerals occur commonly enclosed within sulphides, indicating a magmatic origin rather than hydrothermal. The occurrences and the composition of these minerals suggest that Pd was initially dissolved in the sulphides and subsequently exsolved at low temperatures to form bismutotellurides. Negative Pt and Au anomalies in the mantle-normalised chalcophile element profiles, a lack of Cu-S correlation and textural observations (such as sperrylite losing its euhedral shape when in contact with altered minerals) suggest partial remobilisation of Pt, Au and Cu by postmagmatic hydrothermal fluids after the sulphide crystallisation. Authors’ addresses: R. Pi?a, L. Ortega, R. Lunar, Departamento de Cristalografía y Mineralogía, Facultad de Geología, Universidad Complutense de Madrid, ES-28040 Madrid, Spain; F. Gervilla, Facultad de Ciencias, Instituto Andaluz de Ciencias de la Tierra, Universidad de Granada-CSIC, Avda. Fuentenueva, s/n, ES-18002 Granada, Spain     

Distribution and transport of organic matter along a filament-eddy system in the Canaries – NW Africa coastal transition zone region

The distribution and transport of chlorophyll a (Chla), particulate (POC) and dissolved (DOC) organic carbon, and the respiratory ETS activity of the microplankton community were studied along a filament-eddy system located in the transition zone between the NW Africa upwelling and Canary Islands waters. Two independent filaments (F1 and F2) stemming from the coastal jet, between Cape Juby and Cape Bojador, merged about 100 km offshore, turning southward and onshore forced by the circulation of a recurrent oceanic cyclonic eddy. In general, the coastal upwelling waters presented higher Chla, but lower POC, DOC and ETS activity than filament waters. However, differences in organic carbon distribution and respiratory activity were observed among stations from the two filaments. The bio-chemical fields were strongly influenced by a complex sub-mesoscale hydrography resulting from the interaction of cyclonic and anticyclonic island eddies with the filaments. The combined F1 + F2 filament system transported 97.1 kg s⁻¹ of excess (non-refractory) total organic carbon (e-TOC), a value comparable to other published estimates from upwelling filaments in the NE Atlantic. About 90% of e-TOC was exported as DOC, since eddy re-circulation precluded the offshore transport of POC. Assuming that the calculated transport of e-TOC is representative of the annual average, the yearly offshore transport (3.1 x 10⁹ kg C) would represent about 25% of the upwelling primary production of the region of study.     

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.     

Geologic evolution of the Canarian Islands of Lanzarote, Fuerteventura, Gran Canaria and La Gomera and comparison of landslides at these islands with those at Tenerife, La Palma and El Hierro

In this paper we discuss the results of a swath bathymetric investigation of the Canary archipelago offshore area. These new data indicate that volcanism is pervasive throughout the seafloor in the region, much more that would be suggested by the islands. We have mapped tens of volcanic edifices between Fuerteventura and Gran Canaria and offshore Tenerife, La Gomera, El Hierro and La Palma. Volcanic flows are present between Tenerife and La Gomera and salic necks dominate the eastern insular slope of La Gomera. This bathymetry also supports land geologic studies that indicate that the oceanic archipelago has acquired its present morphology in part by mass wasting, a consequence of the collapse of the volcanic edifices. In the younger islands, Tenerife, La Palma and El Hierro, the Quaternary (1.2 to 0.15 Ma) debris avalanches are readily recognizable and can be traced offshore for distances measured in tens of km. Off the older islands, Lanzarote, Fuerteventura, Gran Canaria and La Gomera (<20 to 3.5 Ma), the avalanches have been obscured by subsequent turbidity current deposition and erosion as well as hemipelagic processes. The failure offshore western Lanzarote is in the form of a ramp at the base of the insular slope bound on the seaward side by a scarp. Its size and the lack of evidence of rotation along its landwards side precludes the possibility that it is a slump. It probably represents a slide whose outer scarp is caused by break-up of the slide. Mounds on the ramp’s surface may represent post-displacement volcanic structures or exotic blocks transported to their present locations by the slide. The failures offshore Fuerteventura are so large that, although they occurred in the Miocene-Pliocene, exotic blocks displaced from upslope are still recognizable in the insular margin morphology. The Canary Island insular margin appears to be a creation of Miocene-Pliocene mass wasting and more recent turbidity current deposition and erosion, and hemilepagic deposition. Failures offshore La Gomera are due to debris flows and/or turbidity currents. These events have obscured earlier mass wasting events. An erratum to this article is available at .     

Magnetic anomalies in the canary basin and the Mesozoic evolution of the central North Atlantic

The data from a recent magnetic compilation by Verhoefet al. (1991) off west Africa were used in combination with data in the western Atlantic to review the Mesozoic plate kinematic evolution of the central North Atlantic. The magnetic profile data were analyzed to identify the M-series sea floor spreading anomalies on the African plate. Oceanic fracture zones were identified from magnetic anomalies and seismic and gravity measurements. The identified sea floor spreading anomalies on the African plate were combined with those on the North American plate to calculate reconstruction poles for this part of the central Atlantic. The total separation poles derived in this paper describe a smooth curve, suggesting that the motion of the pole through time was continuous. Although the new sea floor spreading history differs only slightly from the one presented by Klitgord and Schouten (1986), it predicts smoother flowlines. On the other hand, the sea floor spreading history as depicted by the flowlines for the eastern central Atlantic deviates substantially from that of Sundvik and Larson (1988). A revised spreading history is also presented for the Cretaceous Magnetic Quiet Zone, where large changes in spreading direction occurred, that can not be resolved when fitting magnetic isochrons only, but which are evident from fracture zone traces and directions of sea floor spreading topography.Deceased 11 November 1991     

Input of atmospheric lead to marine sediments in a south-east Pacific coastal area (approximately 36 degrees S)

Atmospheric input of Pb to coastal sediments in the south-east Pacific (approximately 36 degrees S) was estimated using: (1) a salt marsh (non-local emission sources) as a natural collector of atmospheric fluxes and (2) Pb concentrations in rain and air samples, both considered to be representative of the atmospheric input in the study area. A radioisotopic geochronology technique ((210)Pb) was used to estimate the total Pb atmospheric supply to the sediments. The results show that atmospheric input to Concepción Bay accounts for 13-68% of Pb in near shore sediments, evaluated through salt marsh and rain, both showing comparable results. Consequently, there are other relevant Pb sources to explain the higher concentrations in this area. Sediments in the shelf are subject to important influence of upwelling waters, estimated by Salamanca [Sources and sinks of (210)Pb in Concepción Bay, Chile (1993) PhD thesis, Marine Science Research Center, State University of New York at Stony Brook, USA] using (210)Pb. The atmospheric input, however, is mainly responsible for the total Pb input, since the salt marsh (natural atmospheric collector) shows similar Pb(xs) inventories than the shelf, corresponding to a regional-scale Pb emissions.