X-ray and ultraviolet observations of the dwarf nova VW Hyi in quiescence

We present an analysis of X-ray and ultraviolet (UV) data of the dwarf nova VW Hyi that were obtained with XMM–Newton during the quiescent state. The X-ray spectrum indicates the presence of an optically thin plasma in the boundary layer that cools as it settles on to the white dwarf. The plasma has a continuous temperature distribution that is well described by a power law or a cooling flow model with a maximum temperature of 6–8 keV. We estimate from the X-ray spectrum a boundary layer luminosity of  8 × 10³⁰ erg s^-1  , which is only 20 per cent of the disc luminosity. The rate of accretion on to the white dwarf is  5 × 10⁻¹² M_⊙ yr⁻¹  , about half of the rate in the disc. From the high-resolution X-ray spectra, we estimate that the X-ray emitting part of the boundary layer is rotating with a velocity of 540 km s⁻¹, which is close to the rotation velocity of the white dwarf but is significantly smaller than the Keplerian velocity. We detect a 60-s quasi-periodic oscillation of the X-ray flux, which is likely to be due to the rotation of the boundary layer. The X-ray and the UV flux show strong variability on a time-scale of ∼1500 s. We find that the variability in the two bands is correlated and that the X-ray fluctuations are delayed by ∼100 s. The correlation indicates that the variable UV flux is emitted near the transition region between the disc and the boundary layer and that accretion rate fluctuations in this region are propagated to the X-ray emitting part of the boundary layer within ∼100 s. An orbital modulation of the X-ray flux suggests that the inner accretion disc is tilted with respect to the orbital plane. The elemental abundances in the boundary layer are close to their solar values.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.     

Factors affecting spatial and temporal variability in material exchange between the Southern Everglades wetlands and Florida Bay (USA)

Physical and biological processes controlling spatial and temporal variations in material concentration and exchange between the Southern Everglades wetlands and Florida Bay were studied for 2.5 years in three of the five major creek systems draining the watershed. Daily total nitrogen (TN), and total phosphorus (TP) fluxes were measured for 2 years in Taylor River, and ten 10-day intensive studies were conducted in this creek to estimate the seasonal flux of dissolved inorganic nitrogen (N), phosphorus (P), total organic carbon (TOC), and suspended matter. Four 10-day studies were conducted simultaneously in Taylor, McCormick, and Trout Creeks to study the spatial variation in concentration and flux. The annual fluxes of TOC, TN, and TP from the Southern Everglades were estimated from regression equations. The Southern Everglades watershed, a 460-km² area that includes Taylor Slough and the area south of the C-111 canal, exported 7.1 g C m⁻², 0.46 g N m⁻², and 0.007 g P m⁻², annually. Everglades P flux is three to four orders of magnitude lower than published flux estimates from wetlands influenced by terrigenous sedimentary inputs. These low P flux values reflect both the inherently low P content of Everglades surface water and the efficiency of Everglades carbonate sediments and biota in conserving and recycling this limiting nutrient. The seasonal variation of freshwater input to the watershed was responsible for major temporal variations in N, P, and C export to Florida Bay; approximately 99% of the export occurred during the rainy season. Wind-driven forcing was most important during the later stages of the dry season when low freshwater head coincided with southerly winds, resulting in a net import of water and materials into the wetlands. We also observed an east to west decrease in TN:TP ratio from 212:1 to 127:1. Major spatial gradients in N:P ratios and nutrient concentration and flux among the creek were consistent with the westward decrease in surface water runoff from the P-limited Everglades and increased advection of relatively P-rich Gulf of Mexico (GOM) waters into Florida Bay. Comparison of measured nutrient flux from Everglades surface water inputs from this study with published estimates of other sources of nutrients to Florida Bay (i.e. atmospheric deposition, anthropogenic inputs from the Florida Keys, advection from the GOM) show that Everglades runoff represents only 2% of N inputs and 0.5% of P input to Florida Bay.     

An approach to aid INS using time-differenced GPS carrier phase (TDCP) measurements

This paper presents a simple and effective approach that incorporates single-frequency, L1 time-differenced GPS carrier phase (TDCP) measurements without the need of ambiguity resolution techniques and the complexity to accommodate the delayed-state terms. Static trial results are included to illustrate the stochastic characteristics and effectiveness of the TDCP measurements in controlling position error growth. The formulation of the TDCP observation model is also described in a 17-state tightly-coupled GPS/INS iterative, extended Kalman filter (IEKF) approach. Preliminary land vehicle trial results are also presented to illustrate the effectiveness of the TDCP which provides sub-meter positional accuracies when operating for more than 10 min.     

The Creation of a National Agricultural Land Use Dataset: Combining Pycnophylactic Interpolation with Dasymetric Mapping Techniques

Agricultural Census data is summarised over spatially coarse reporting units for reasons of farm confidentiality. This is problematic for research at a local level. This article describes an approach combining dasymetric and volume preserving techniques to create a national land use dataset at 1 km² resolution. The results for an English county are compared with contemporaneous aggregated habitat data. The results show that the accurate estimates of local agricultural land use (Arable and Grass) patterns can be estimated when individual 1 km squares are combined into blocks of > 9 squares, thereby providing local estimates of agricultural land use. This in turn allows more detailed modelling of land uses related to specific livestock and cropping activities. The dataset created by this work has been subject to extensive external validation through its incorporation into a number of other national models: nitrate leaching (e.g. MAGPIE, NEAP‐N), waste, and pathogen modelling related to agricultural activity.     

Mechanisms of shrubland expansion: land use,climate or CO2?

Encroachment of trees and shrubs into grasslands and the thicketization of savannas has occurred worldwide over the past century. These changes in vegetation structure are potentially relevant to climatic change as they may be indicative of historical shifts in climate and as they may influence biophysical aspects of land surface-atmosphere interactions and alter carbon and nitrogen cycles. Traditional explanations offered to account for the historic displacement of grasses by woody plants in many arid and semi-arid ecosystems have centered around changes in climatic, livestock grazing and fire regimes. More recently, it has been suggested that the increase in atmospheric CO₂ since the industrial revolution has been the driving force. In this paper we evaluate the CO₂ enrichment hypotheses and argue that historic, positive correlations between woody plant expansion and atmospheric CO₂ are not cause and effect.Please direct all correspondence to the senior author.     

A realistic model for point-sources imaged on array detectors: The model and initial results

We have constructed a computer model for simulation of point-sources imaged on two-dimensional detectors. An attempt has been made to ensure that the model produces data that mimic real data taken with 2-D detectors. To be realistic, such simulations must include randomly generated noise of the appropriate type from all sources (e.g. source, background, and detector). The model is generic and accepts input values for parameters such as pixel size, read noise, source magnitude, and sky brightness. Point-source profiles are then generated with noise and detector characteristics added via our model. The synthetic data are output as simple integrations (onedimensional), as radial slices (two-dimensional), and as intensity-contour plots (three-dimensional). Each noise source can be turned on or off so that they can be studied separately as well as in combination to yield a realistic view of an image. This paper presents the basic properties of the model and some examples of how it can be used to simulate the effects of changing image position, image scale, signal strength, noise characteristics, and data reduction procedures.Use of the model has allowed us to confirm and quantify three points: 1) The use of traditionalsize apertures for photometry of faint point-sources adds substantial noise to the measurement which can significantly degrade the quality of the observation; 2) The number of pixels used to estimate the background is important and must be considered when estimating errors; and 3) The CCD equation normally used by the astronomical community consistently overestimates the signal-to-noise obtainable by a measurement while a revised equation, discussed here, provides a better estimator.     

Precious metals in massive base metal sulfide deposits

Gold and silver are ubiquitous, sometimes minor but economically important metals in massive base metal sulfide ores. Their content, proportions and distribution in the ores depend on complex, interrelated factors of their source, mobilization, transport and deposition.Different types of these deposits are formed by similar seafloor hydrothermal systems operating, however, in widely differing tectono-stratigraphic environments which span a spectrum from ensimatic-oceanic, through continent-margin to ensialic-continental ones. Like those of the base metals, the proportions and distribution of the precious metals in the ores vary regionally with these changing depositional environments. This suggests that precious metal content of the sub-seafloor rocks in which the generative fluids circulate is one factor that governs the amounts and distribution in the ores. The lithology of these source-rocks is also important. Pillowed, tholeiitic basalts have high permeability, golddepleted crystalline pillow interiors and relatively gold-rich palagonitic rims, and are consequently particularly favorable sources.Mobilization of gold from the sub-seafloor rocks may require basalt-water, and/or carbonaceous sediment-water reactions to produce strongly reduced bisulfide, carbonyl or cyanide complexes that promote gold transport. Chloride complexing and transport are less important for gold but more so for silver and the base metals.Seafloor hydrothermal discharge at shallow depth is commonly accompanied by boiling, steamblast explosions in the vent and resulting deep penetration and mixing of cool, oxygenated seawater with rising hot, reduced metalliferous fluid. This results in deposition of both chloride- and isulfide-complexed gold at depth and centrally in the footwall stockwork or in copper ore in the base of the massive body. Chloride-complexed silver, stable to lower temperatures, is carried farther and deposited with higher-level and more distal, massive zinc-lead ores. Boiling in deep water, however, although possible, is rare. This fact minimizes deep fluid mixing and allows transport of lower temperaturestable, bisulfide-complexed gold to the seafloor and outward from the vent. Gold too, is then deposited with the shallower, distal, massive zinc-lead-silver ore. Late-stage changes in fluid Eh, salinity and activity of sulfur during evolution of the generative hydrothermal system, and by discharge through previously deposited, early stage sulfides around the vent also cause diagenetic remobilization of gold, moving it to shallower, more distal locations in the system. In combination, these relationships explain the three associations of gold in primary, in-situ massive sulfide deposits; in central, deep footwall stockwork mineralization with or without copper, in central copper ore in the base of the massive body and in shallow, peripheral pyritic zinclead-silver ore.Primary, in-situ ore near the vent is sometimes reworked by seafloor density flows which transport clasts of the primary sulfides down-slope, mix them with rock and sedimentary detritus and redeposit them to form secondary, transported ore. Gold, like iron and the base metals, is diluted during this clastic transport. But silver and barite may be enriched indicating transport in the density flows not only as clasts of primary ore but partly also m solution in the hydrothermal fluids that, in this case, must have lubricated the density flows.

---

Zusammenfassung Gold- und Silbervorkommen in massiven Metallsulfid-Lagerstätten sind stets ökonomisch wichtige Metalle, auch wenn sie nur in geringen Konzentrationen vorliegen. Der Gehalt an diesen Metallen und ihre Verteilung innerhalb der Lagerstätte hängt von komplexen, sich gegenseitig beeinflussenden Faktoren wie Metallquelle, Art der Mobilisation, Transport und Fällung ab.Unterschiedliche Lagerstättentypen werden von ähnlichen hydrothermalen Systemen auf den Ozeanböden gebildet. Die tektonostratigraphischen Environments unterscheiden sich dabei allerdings beträchtlich; sie befinden sich in ensimatisch-ozeanischen, kontinentalrandlichen und ensialischkontinentalen Bereichen. Innerhalb dieser regional wechselnden Ablagerungsbedingungen variiert Konzentration und Verteilung der Edelmetalle in den Lagerstätten wie bei den einfachen Metallen. Dies bedeutet, daß der Gehalt an Edelmetallen der Gesteine, die den Meeresboden unterlagern und durch die die metallhaltigen Lösungen zirkulieren, ein Faktor ist, der Menge und Verteilung der Metalle in der Lagerstätte steuert. Ebenso ist die Lithologie dieser Gesteine von Bedeutung. Als besonders gut geeignete Quellen gelten kissenartige tholeitische Basalte mit hoher Permeabilität, goldarmen Kisseninneren und relativ goldreichem palagonitischem Rand.Um das Gold aus diesen Gesteinen mobilisieren zu können, bedarf es einer Reaktion zwischen Basalt und Wasser und/oder eines karbonatischen Sediments mit Wasser, um stark reduziertes Bisulfid, Carbonyl-oder Cyanidkomplexe zu bilden, die den Goldtransport ermöglichen. Chlorid-Komplexbildung und -Transport sind zwar wichtig für Silber und einfache Metalle, für Gold spielen sie nur eine untergeordnete Rolle.Der Austritt hydrothermaler Lösungen an Ozeanböden in geringer Tiefe wird in der Regel von Sieden und explosionsartigem Dampfaustritt begleitet und führt deshalb zu einem tiefen Eindringen und Durchmischen von kaltem, sauerstoffreichen Meereswasser mit den aufsteigenden heißen, reduzierten metallischen Lösungen. Daher kommt es zur Fällung von sowohl an Chloridkomplexe als auch an Bisulfidkomplexe gebundenem Gold. Diese Ausfällung findet in größerer Tiefe statt und zwar hauptsächlich im liegenden Stockwerk oder mit Kupfer zusammen an der Basis der massiven Lagerstätte. An Chloridkomplexe gebundenes Silber ist auch bei niedrigeren Temperaturen stabil, wird also weiter transportiert und in einem höheren Niveau in distal gelegenen Blei-Zink-Lagerstätten gefällt. In größeren Wassertiefen kommt es seltener zu dem beobachteten Sieden der austretenden Lösungen. Diese Tatsache reduziert das Durchmischen der Lösungen in größeren Tiefen und ermöglicht den Transport von Gold, das an Bisulfidkomplexe gebunden ist. In diesem Fall ist die Verbindung auch bei niedrigeren Temperaturen noch stabil also transportfähig und kann bis zum Meeresboden oder außerhalb des Schlotes in Lösung bleiben. Dabei kann das Gold zusammen mit Blei, Zink und Silber in mehr distalen Lagerstätten angereichert werden. Späte Änderungen in Eh, Salinität und Schwefelaktivität der Lösungen während der Entwicklung des hydrothermalen Systems, sowie der Austritt durch früher abgelagerte den Schlot umgebende Sulfide, können eine diagenetische Gold-Remobilisation auslösen. Auch dabei kann das Metall zu in geringer Tiefe liegenden, distalen Ablagerungsorten transportiert werden. Berücksichtigt man alle Faktoren, so erklären diese Verhältnisse die drei möglichen Goldvorkommen in primären, in-situ vorliegenden Sulfid-Lagerstätten: Mit Kupfer vergesellschaftet, allerdings nicht unbedingt, zentral im liegenden Stockwerk; an der Basis der Kupferlagerstätte und in geringer Tiefe in Verbindung mit peripheren Blei-Zink-Silber-Vorkommen.Primäre, in-situ neben Schloten vorkommende Lagerstätten werden in einigen Fällen von meeresbodennahen Masseströmen aufgearbeitet. Diese transportieren Sulfidkomponenten, die während des Transports mit Sediment und Gesteinsbruchstücken vermischt und schließlich als sekundäre sedimentäre Lagerstätte abgelagert werden. Durch diesen Transport und die Mischung der Klastika wird die Goldkonzentration in der späteren Lagerstätte stark reduziert. Silber und Barit können dagegen in Ausnahmefällen während des Transports angereichert werden, da diese Komponenten nicht nur als Sulfidbruchstücke transportiert werden, sondern auch in Lösung in den hydrothermalen Lösungen vorhanden sein können. Diese Lösungen dienen in solchen Fällen den Masseströmen als Gleithorizont.

---

Résumé Dans les gisements de sulfures métalliques massifs, l'or et l'argent sont des métaux ubiquistes, parfois mineurs, mais toujours d'importance économique. Leur teneur et leur distribution dans les corps minéralisés dépendent de facteurs complexes, en relation les uns avec les autres, tels que: leur source, leur mobilité, leurs modalités de transport et de dépôt.A partir des mêmes systèmes hydrothermaux en action sur le fond de la mer, divers types de gisements peuvent être engendrés, selon leur environnement tectono-stratigraphique: océanique ensimatique, de marge continentale ou continental ensialique. Les teneurs et la répartition des métaux précieux, comme celle des autres métaux varient régionalement selon ces divers milieux. Ceci suggère que le contenu en métaux précieux dans les roches sous-jacentes au fond marin à travers lesquelles circulent les solutions minéralisantes est un facteur qui détermine leurs teneurs et leurs répartitions dans les minerais. La lithologie de ces roches-sources est également importante. Une source particulièrement significative est représentée par les coussins des basaltes tholéiitiques, très perméables, avec leur coeur pauvre en or et leur couronne palagonitique relativement riche.Le lessivage de l'or dans les roches situées sous le fond marin peut impliquer des réactions eau-basalte et/ou eausédiments carbonatés, réactions susceptibles d'engendrer les bisulfures très réduits et les complexes carbonés ou cyanurés qui permettent le transport de l'or. Le transport par complexes chlorurés joue un rôle subordoné dans le cas de l'or, mais important dans le cas de l'argent et des autres métaux.L'arrivée de solutions hydrothermales sur les fonds marins peu profonds est d'ordinaire accompagnée d'ébullitons et d'émissions explosives de vapeur, ce qui provoque la pénétration profonde d'eau de mer froide et oxygénée et son mélange avec les fluides métallifères chauds et réducteurs ascendants. Il en résulte le dépôt de complexes aurifères bisulfurés et chlorurés. Cette précipitation s'opère en profondeur, particulièrement dans les roches sous-jacentes ou dans le minerai de cuivre, à la base des corps minéralisés massifs. L'argent des complexes chlorurés, stables à plus basse température, est transporté plus loin et se dépose, en situation plus distale, dans les minerals massifs de Pb-Zn. Dans les mers profondes, l'ébullition, sans être impossible, est néanmoins un phénomène rare; cette circonstance minimise le mélange des fluides en profondeur et permet le transport de l'or jusqu'à la surface du fond et même loin des évents sous la forme de complexes bisulfurés stables à basse température. L'or est alors déposé en situation distale peu profonde avec les minerals massifs de Zn-Pb-Ag. Des modifications tardives d'Eh, de salinité et d'activité du soufre dans les solutions au cours de l'évolution du système hydrothermal, de même que le lessivage des sulfures déjà accumulés autour des évents entraînent une remobilisation diagénétique de l'or vers des situations distales d'eau peu profonde. La combinaison de ces divers facteurs permet d'expliquer les trois occurrences de l'or dans les dépôts in situ de sulfures massifs primaires: dans les parties centrales des masses sous-jacentes en association ou non avec le Cu, à la base des corps minéralisés en Cu, et à faible profondeur, en liaison avec les gisements périphériques de Pb-Zn-Ag.Les gisements primaires, formés in situ près des évents sont parfois remaniés par des courants de densité, qui emportent des clastes de sulfures, les mélangent aux débris sédimentaires et les redéposent sous forme de minerais secondaires. De tels transports provoquent la dilution de l'or, en même temps que celle du fer et des autres métaux. Par contre, l'argent et la barite peuvent subir un enrichissement car leur transport dans les courants de densité ne s'effectue pas seulement sous forme de clastes, mais également en solution dans des fludies hydrothermaux, lesquels, dans ce cas, contribuent à lubrifier le courant de densité.

---

, . , , - , , . . - ; -, - . . .., , , , , . . , ; , . , / ; , , , . ; . , , , , , . , . , . . , , . , , , ; , - . . , . , .. . , . , , . , . , 3- in-situ: , , , ; ; , . , in-situ , . , . . , , , , . , .