Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

Erratum to: Cloning, characterization, and expression analysis of the DEAD-box family genes, Fc-vasa and Fc-PL10a, in Chinese shrimp (Fenneropenaeus chinensis)

<正>In the original article, the name of the fourth author is incorrect. The correct one is Kyoung Ho Kang, in which "Kang" is the family name. The publishing companies apologize to the author.     

Estimation of non-CO2 GHGs emissions by analyzing burn severity in the Samcheok fire, South Korea

This study was performed to estimate the emission of non-CO 2 greenhouse gases(GHGs) from biomass burning at a large fire area.The extended methodology adopted the IPCC Guidelines(2003) equation for use on data from the Samcheok forest fire gathered using 30 m resolution Landsat TM satellite imagery,digital forest type maps,and growing stock information per hectare by forest type in 1999.Normalized burn ratio(NBR) technique was employed to analyze the area and severity of the Samcheok forest fire that occurred in 2000.The differences between NBR from pre-and post-fire datasets are examined to determine the extent and degree of change detected from burning.The results of burn severity analysis by dNBR of the Samcheok forest fire area revealed that a total of 16,200 ha of forest were burned.The proportion of the area characterized by a ’Low’ burn severity(dNBR below 152) was 35%,with ’Moderate’(dNBR 153-190) and ’High’(dNBR 191-255) areas were at 33% and 32%,respectively.The combustion efficiency for burn severity was calculated as 0.43 for crown fire where burn severity was ’High’,as 0.40 for ’Moderate’ severity,and 0.15 for ’Low’ severity surface fire.The emission factors for estimating non-CO 2 GHGs were separately applied to CO 130,CH 4 9,NO x 0.7 and N 2 O 0.11.Non-CO 2 GHGs emissions from biomass burning in the Samcheok forest fire area were estimated to be CO 44.100,CH 4 3.053,NO x 0.238 and N 2 O 0.038 Gg.     

不稳定边界层下地形重力内波

水槽实验及线性理论研究表明,当低层大气处于近中性或不稳定时,如果地形引起的动力扰动足够强,地形扰动可在上部稳定层结中激发出重力内波,波动反过来影响低层流场,引起动量输送。低层大气处于近中性或不稳定时,地形波同样对大气运动可产生波阻,这应引起模式工作者的重视。最后讨论了大气粘性对中性或不稳定层结下地形波的影响。     

Velocities and Temperatures of an Ellerman Bomb and Its Associated Features

We investigated the velocity and temperature characteristics of an Ellerman bomb (EB) and its associated features based on observations made with the Fast Imaging Solar Spectrograph (FISS) and a broadband TiO filter of the 1.6 meter New Solar Telescope at Big Bear Solar Observatory. In the TiO images of the photospheric level, we found a granular cell expanding in two opposite directions near the site of the EB. When one end of this granule reached the EB site, the transverse speed of the tip of the expanding granule rapidly decreased and the EB brightened. The wings of the Hα profile of the EB indicated that the EB was blueshifted up to 7 km?s^?1. About 260 s after the EB brightening, a surge was seen in absorption and varied from a blueshift of 20 km?s^?1 to a redshift of 40 km?s^?1 seen in the Hα and Ca ii 8542 Å lines. From the Doppler absorption width of the two lines determined by applying the cloud model, we estimated the mean temperature of the surge material to be about 29000 K and the mean speed of nonthermal motion to be about 11 km?s^?1. We discuss the physical implications of our results in terms of magnetic reconnection and processes related to it.     

East Asian monsoon variation and climate changes in Jeju Island, Korea, during the latest Pleistocene to early Holocene

A 4.96-m-long sediment core from the Hanon paleo-maar in Jeju Island, Korea was studied to investigate the paleoclimatic change and East Asian monsoon variations during the latest Pleistocene to early Holocene (23,000-9000 cal yr BP). High-resolution TOC content, magnetic susceptibility, and major element composition data indicate that Jeju Island experienced the coldest climate around 18,000 cal yr BP, which corresponds to the last glacial maximum (LGM). Further, these multi-proxy data show an abrupt shift in climatic regime from cold and arid to warm and humid conditions at around 14,000 cal yr BP, which represents the commencement of the last major deglaciation. After the last major deglaciation, the TOC content decreased from 13,300 to 12,000 cal yr BP and from 11,500 to 9800 cal yr BP, thereby reflecting the weakening of the summer monsoon. The LGM in Jeju Island occurred later in comparison with the Chinese Loess Plateau. Such a disparity in climatic change events between central China and Jeju Island appears to be caused by the asynchrony between the coldest temperature event and the minimum precipitation event in central China and by the buffering effect of the Pacific Ocean.     

http://www.sciencedirect.com/science/article/pii/S1674987112000266

Major,trace and rare earth element(REE) concentrations of Late Triassic sediments(finegrained sandstones and mudstones) from Hongcan Well 1 in the NE part of the Songpan-Ganzi Basin, western China,are used to reveal weathering,provenance and tectonic setting of inferred source areas. The Chemical Index of Alteration(CIA) reflects a low to moderate degree of chemical weathering in a cool and somewhat dry climate,and an A-CN-K plot suggests an older upper continental crust provenance dominated by felsic to intermediate igneous rocks of average tonalite composition.Based on the various geochemical tectonic setting discrimination diagrams,the Late Triassic sediments are inferred to have been deposited in a back-arc basin situated between an active continental margin(the Kunlun-Qinling Fold Belt) and a continental island arc(the Yidun Island Arc).The Triassic sediments in the study area underwent a rapid erosion and burial in a proximal slope-basin environment by the petrographic data. while the published flow directions of Triassic lurbidites in the Aba-Zoige region was not supported Yidun volcanic arc source.Therefore,we suggest that the Kunlun-Qinling tcrrane is most likely to have supplied source materials to the northeast part of the Songpan-Ganzi Basin during the Late Triassic.