Optical and X-Ray Observations of the Symbiotic System Ag Draconis During Quiescence and Outburst

We review the main characteristics of the symbiotic system AG Draconis, with special emphasis on its optical and X-ray variations. We also discuss the X-ray to visual energy distribution during quiescence and outburst and describe our spectroscopic and X-ray observations during the 2003 outburst. Based on X-ray observations collected with the XMM–Newton Observatory, on INES data from the IUE satellite, and on optical spectra collected with the Asiago–Cima Ekar, Bologna–Loiano and La Palma–Galileo Italian telescopes.     

Astronomical Site Testing in Northwest of Argentina

We present the preliminary results of the astronomical site testing, which the group IATE of the OAC is developing in northwest of Argentine in collaboration with ESO and the Department of Astronomy of Cornell University. We show the results, which we have obtained from the analysis of GOES 8 satellite images in the 10.7 μm band, which allowed us to configurate a map of clear sky regions in an area between 23° and 28° S, and 66° 30′ and 69° W. We also comment logistical and tectonic aspects, and discuss next steps to follow in the research.     

Petrology and U-Pb Zircon Geochronology of Amphibole-rich Cumulates with Sanukitic Affinity from Husky Ridge (Northern Victoria Land, Antarctica): Insights into the Role of Amphibole in the Petrogenesis of Subduction-related Magmas

A microanalytical trace element and geochronological study wascarried out on mafic amphibole-rich cumulates (quartz diorites)cropping out in northern Victoria Land (Antarctica). Associatedtonalites and basement rocks were also investigated. Rock texturesand major and trace element mineral compositions reveal thepresence in quartz diorites of two mineral assemblages: (1)clinopyroxene-I + brown amphibole ± dark mica; (2) clinopyroxene-II+ green amphibole + plagioclase + quartz. Both mineral assemblagescontain mafic phases with elevated Mg-number, but their traceelement signatures differ significantly. In situ U–Pbzircon geochronology was carried out to support petrogeneticand geological interpretations. Quartz diorites were emplacedin the mid-crust probably at 516 ± 3 Ma. Parental meltsof quartz diorites were computed by applying solid/liquid partitioncoefficients. The melt in equilibrium with the first mineralassemblage (melt-I) is extremely depleted in heavy rare earthelements (HREE), Y, Ti, Zr and Hf (at about 0·2 timesnormal mid-ocean ridge basalt) and enriched in B, Th, U, thelarge ion lithophile elements and light REE (LREE). It sharesmany similarities with sanukitic melts (e.g. Setouchi andesites),which originated by equilibration of subduction-derived sedimentmelts with a refractory mantle. The melt in equilibrium withthe second mineral assemblage (melt-II) is characterized bya steep LREE enrichment (La_N/Yb_N up to 39), a U-shaped HREEpattern and low Ti, which is depleted relative to HREE. Thetrace element signature of melt-II can be acquired through amphibolecrystallization starting from a sanukitic melt similar to melt-I,probably in a deeper magma chamber. Our results allow us toconstrain that melts from the subducted slab were produced ona regional scale, in accordance with literature data, belowa large sector of the east Gondwana margin during the mid-Cambrian.Implications for the role of amphibole in petrogenesis of subduction-relatedmagmas are also discussed. KEY WORDS: amphibole; sanukite; high-Mg andesites; Ross Orogeny; Antarctica     

Seismic structure and tectonics of the Shackleton Fracture Zone (Drake Passage,Scotia Sea)

The structural framework of the southern part of the Shackleton Fracture Zone has been investigated through the analysis of a 130-km-long multichannel seismic reflection profile acquired orthogonally to the fracture zone near 60° S. The Shackleton Fracture Zone is a 800-km-long, mostly rectilinear and pronounced bathymetric lineation joining the westernmost South Scotia Ridge to southern South America south of Cape Horn, separating the western Scotia Sea plate from the Antarctic plate. Conventional processing applied to the seismic data outlines the main structures of the Shackleton Fracture Zone, but only the use of enhanced techniques, such as accurate velocity analyses and pre-stack depth migration, provides a good definition of the acoustic basement and the architecture of the sedimentary sequences. In particular, a strong and mostly continuous reflector found at about 8.0 s two-way traveltime is very clear across the entire section and is interpreted as the Moho discontinuity. Data show a complex system of troughs developed along the eastern flank of the crustal ridge, containing tilted and rotated blocks, and the presence of a prominent listric normal fault developed within the oceanic crust. Positive flower structures developed within the oceanic basement indicate strike-slip tectonism and partial reactivation of pre-existing faults. Present-day tectonic activity is found mostly in correspondence to the relief, whereas fault-induced deformation is negligible across the entire trough system. This indicates that the E–W-directed stress regime present in the Drake Passage region is mainly dissipated along a narrow zone within the Shackleton Ridge axis. A reappraisal of all available magnetic anomaly identifications in the western Scotia Sea and in the former Phoenix plate, in conjunction with new magnetic profiles acquired to the east of the Shackleton Fracture Zone off the Tierra del Fuego continental margin, has allowed us to propose a simple reconstruction of Shackleton Fracture Zone development in the general context of the Drake Passage opening.     

Contribution of Sponge Spicules to the Composition of Biogenic Silica in the Ligurian Sea

Abstract. The importance of sponge spicules in the turnover of biogenic silica (BSi) in the detritic bottoms of the Eastern Ligurian Riviera was evaluated by studying sediment cores and the detrital matter collected by a trap over a one year period.
This study made evident that: i) Sponge spicules represent the main component of the BSi both in the sediments and in the trapped matter; ii) A correlation exists between the sponge biomass present on the overhanging cliff and the amount of sponge spicules found in the sediment below; iii) Inside the sediments, a superficial layer (10 cm deep) characterized by intensive silica dissolution processes can be observed; and iv) The amount of spicules collected using the trap is not constant throughout the year, but shows a characteristic trend with low values in spring and summer and high values in autumn and winter.     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

Possible creep-related tilt precursors obtained in the Central Apennines (Italy) and in the Southern Caucasus (Georgia)

Daily averaged tilt component data from two sites of the Central Apennines (Italy) and of the Southern Caucasus (Georgia), respectively, revealed intermediate-term tilts as possible precursors to earthquakes (M=3.0÷4.7) which occurred in the above-mentioned seismic areas within a distance of 50 km from the sites. A good temporal correlation as well as a fair spatial correspondence between these residual tilts (with amplitude and duration of some microradians and months, respectively) and main shocks were pointed out, by removing both secular trends and seasonal thermoelastic effects from the raw tilts. An attempt was made to justify the above-mentioned results, based on the assumption that the observed intermediate-term preseismic tilts are the manifestation of aseismic creep episodes of comparable duration in the fault materials of thrust faults close to the tilt sites. The mechanism refers to a strain field slowly propagating from the preparation focal area to the tilt site, through crustal blocks separated by weak transition zones. This propagation is thought to be the cause of the local aseismic fault slip recorded by the tiltmeters. Previously, both discrete structures and strain propagation effects were revealed in the Central Apennines and are thought also to exist in the Southern Caucasus. As in the past, the rheological properties of fault materials are revealed as viscoelastic ones. In fact, creep equations obtained by applying several viscoelastic models on our data, proved to fit quite well some of the observed tilt precursors, producing viscosity and rigidity values very similar to those reported in literature.Professor Petr Viktorovich Manjgaladze died during the writing of this paper     

Slope instability of San Miniato hill (Florence, Italy): possible deformation patterns

The hill of San Miniato (Florence, Italy) has been repeatedly identified in the past as the site of a slow moving, intermittent landslide. Possible hypotheses regarding the mechanisms responsible for past movements and for cracks and fissures present today are formulated based on the comparison of historical information and processed monitoring data. Although it is not possible to completely exclude a large inactive landslide that involves the entire northern slope, it seems more probable that the slide, if it does exist, is no longer active and that present-day damage is due to separate shallow movements concentrated in man-made deposits. This hypothesis can only be verified with a temporal extension of the monitoring activities, necessary in any case for planning possible safeguarding measures for the cultural heritage in the area.     

HVSR prospecting in multi-layered environments: An example from the Tyrnavos Basin (Greece)

The Tyrnavos Basin (Central Greece) is an E-W trending graben bordered by two major antithetic sets of right-stepping dip-slip normal faults that began forming during Middle Pleistocene as a consequence of the N-S extension which affected the whole Aegean Region. This Quaternary structure is superimposed on the Pliocene-Early Pleistocene NW-SE trending Larissa Basin, approximately 700–800 m deep. Seismic activity is instrumentally well documented within and surrounding the investigated area. Based on structural, morphotectonic and palaeoseismological data, several structures previously characterised as active faults have been investigated by applying the HVSR method. This method is commonly used to map the thickness of sedimentary layers in a basin based on the variation of the fundamental 1-D frequency. The polyphased structural evolution and the consequently complex geological setting do not allow for the contouring of a unique continuous surface. We therefore developed a new interpretation technique for statistically significant HVSR peaks, in order to obtain 2-D sections that can be interpreted in a seismic-like fashion. We applied this technique across the major active faults bordering the basin. The results confirm their occurrence at depth and document the important vertical component of displacement.