Stochastic Structural Modeling

A consistent stochastic model for faults and horizons is described. The faults are represented as a parametric invertible deformation operator. The faults may truncate each other. The horizons are modeled as correlated Gaussian fields and are represented in a grid. Petrophysical variables may be modeled in a reservoir before faulting in order to describe the juxtaposition effect of the faulting. It is possible to condition the realization on petrophysics, horizons, and fault plane observations in wells in addition to seismic data. The transmissibility in the fault plane may also be included in the model. Four different methods to integrate the fault and horizon models in a common model is described. The method is illustrated on an example from a real petroleum field with 18 interpreted faults that are handled stochastically.     

Geochemical studies on urban soil from two sampling depths in Tampere Central Region,Finland

Preliminary geochemical mapping was carried out within urban areas in Tampere Central Region, Finland, to gain a better understanding of element concentrations in urban soil and to provide information on baselines in soil within urban centres for soil contamination assessment purposes. The soil samples were taken from central city parks, day-care centres and school yards, and residential areas. Various sampling depths have generally been used in urban geochemical surveys. The aim of this study was to compare the results from two commonly used sample types taken from the same sites in urban soil: single samples of minerogenic topsoil from the 0–25 cm layer and composite samples of minerogenic topsoil from a depth of 0–2 cm. The concentrations of most of the studied trace elements showed a significant correlation between samples from 0 to 2 and 0 to 25 cm, but element concentrations differed between the two studied sample depths. For most of the studied elements, the median concentrations were higher in the 0–25 cm samples, but anomalous concentrations were more often found in the 0–2 cm samples. Some elements had elevated concentrations when compared with the Finnish guideline values for soil contamination assessment. This study did not conclusively establish whether a sampling depth of 0–2 or 0–25 cm should be recommended for similar studies in the future. Selection of the sampling depth in geochemical studies greatly depends on the aim of the project. In order to determine the upper limits of geochemical baseline variation, the deeper sampling depth appears to be more feasible. However, for the preliminary health risk assessment of areas with sensitive land uses, e.g. children’s playgrounds, samples from 0–2 cm depth are considered informative. Such samples may also be used to indicate local sources of dusting creating site-specific hotspots of potentially harmful elements in urban topsoil.     

Towards a 4D topographic view of the Norwegian sea margin

The present-day topography/bathymetry of the Norwegian mainland and passive margin is a product of complex interactions between large-scale tectonomagmatic and climatic processes that can be traced back in time to the Late Silurian Caledonian Orogeny. The isostatic balance of the crust and lithosphere was clearly influenced by orogenic thickening during the Caledonian Orogeny, but was soon affected by post-orogenic collapse including overprinting of the mountain root, and was subsequently affected by a number of discrete extensional events eventually leading to continental break-up in Early Eocene time. In the mid-Jurassic the land areas experienced deep erosion in the warm and humid climate, forming a regional paleic surface. Rift episodes in the Late Jurassic and Early Cretaceous, with differential uplift along major fault zones, led to more pronounced topographic contrasts during the Cretaceous, and thick sequences of clastic sediments accumulated in the subsiding basins on the shelf. Following renewed extension in the Late Cretaceous, a new paleic surface developed in the Paleocene. Following break-up the margin has largely subsided thermally, but several Cenozoic shortening events have generated positive contraction structures. On the western side of the on-shore drainage divide, deeper erosion took place along pre-existing weakness zones, creating the template of the present day valleys and fjords. In the Neogene the mainland and large portions of the Barents Sea were uplifted. It appears that this uplift permitted ice caps to nucleate and accumulate during the Late Pliocene northern hemisphere climatic deterioration. The Late Pliocene to Pleistocene glacial erosion caused huge sediment aprons to be shed on to the Norwegian Sea and Barents Sea margins. Upon removal of the ice load the landmass adjusted isostatically, and this still continues today.     

Trace metal concentrations in lake and overbank sediments in southern Norway

 As, Be, Cd, Co, Cr, Cu, Hg, Ni, Pb, V, Se and Zn concentrations were determined and compared in lake and overbank sediments from 33 catchments without local pollution sources in southern Norway. There were no significant differences in concentrations of Be, Co, Cr, Cu, Ni, and V in overbank and pre-industrial lake sediments. In areas with shallow overburden, and significant influence from long-range atmospheric pollution, concentrations of As, Cd, Hg, Pb, Se, and Zn in overbank sediments were probably modified by vertical percolating water. In such areas, we suggest using lake sediments as a better sampling medium for mapping pre-industrial concentrations. Pre-industrial lake sediments yield natural concentrations of Hg and Se, which consist of both geogenic and natural atmospheric deposition. Important covariables like organic carbon content, Fe oxides, and fine mineral fraction were generally higher in pre-industrial lake sediments as compared to overbank sediments. By adjusting for such differences overbank sediments could be used as an alternative in mapping background concentrations of trace metals in regions with few lakes. Received: 19 February 1999 · Accepted: 17 April 1999     

Pockmark-like depressions near the Goliat hydrocarbon field,Barents Sea: Morphology and genesis

Pockmarks are observed worldwide along the continental margins and are inferred to be indicators of fluid expulsion. In the present study, we have analysed multibeam bathymetry and 2D/3D seismic data from the south-western Barents Sea, in relation to gas hydrate stability field and sediment type, to examine pockmark genesis. Seismic attributes of the sediments at and beneath the seafloor have been analysed to study the factors related to pockmark formation. The seabed depths in the study area are just outside the methane hydrate stability field, but the presence of higher order hydrocarbon gases such as ethane and/or propane in the expelled fluids may cause localised gas hydrate formation. The selective occurrence of pockmarks in regions of specific seabed sediment types indicates that their formation is more closely related to the type of seabed sediment than the source path of fluid venting such as faults. The presence of high acoustic backscatter amplitudes at the centre of the pockmarks indicates harder/coarser sediments, likely linked to removal of soft material. The pockmarks show high seismic reflection amplitudes along their fringes indicating deposition of carbonates precipitated from upwelling fluids. High seismic amplitude gas anomalies underlying the region away from the pockmarks indicate active fluid flow from hydrocarbon source rocks beneath, which is blocked by overlying less permeable formations. In areas of consolidated sediments, the upward flow is limited to open fault locations, while soft sediment areas allow diffused flow of fluids and hence formation of pockmarks over a wider region, through removal of fine-grained material.     

Environmental Geology

The mining environment, medical geology and urban geochemistry form a group of related scientific disciplines that have developed strongly during recent years in the Nordic countries. Modern legislation controls the environmental issues. Close co-operation of researchers and legislators has improved the quality and safety of life in the societies of the Nordic countries. In mining environmental studies, methods that are suitable in Arctic conditions have been developed; in medical geology, the input from the Nordic countries has made it an appreciated scientific discipline throughout the world, and in the case of the urban environment, methods developed by our geochemists have especially improved the health conditions, particularly of children.     

Mud aprons in front of Svalbard surge moraines: Evidence of subglacial deforming layers or proglacial glaciotectonics?

Large debris-flow units commonly occur on the distal sides of subaqueous end moraines deposited by surges of Svalbard tidewater glaciers, but have rarely been described in terrestrial settings. Some researchers have argued that these kinds of debris flows reflect processes unique to the subaqueous environment, such as the extrusion of subglacial deforming layers or extensive failure of oversteepened moraine fronts. In this paper, we describe terrestrial and subaqueous parts of a single late Holocene moraine system deposited by a major surge of the tidewater glacier Paulabreen in west Spitsbergen. The ice-marginal landforms on land closely resemble the corresponding landforms on the seabed as evidenced by geomorphic mapping and geophysical profiles from both environments. Both onland and offshore, extensive areas of hummocky moraine occur on the proximal side of the maximum glacier position, and large mud aprons (interpreted as debris flows) occur on the distal side. We show that the debris-flow sediments were pushed in front of the advancing glacier as a continuously failing, mobile push moraine. We propose that the mud aprons are end members of a proglacial landforms continuum that has thrust-block moraines as the opposite end member. Two clusters of dates (~ 8000 YBP and ~ 700 YBP) have previously been interpreted to indicate two separate surges responsible for the moraine formation. New dates suggest that the early cluster indicates a local extinction of the abounded species Chlamys islandica. Other changes corresponding to the widespread 8.2 ka event within the fjord, may suggest that the extinction of the C. islandica corresponds to that time.     

An example of fingerprint detection of greenhouse climate change

As an example of the technique of fingerprint detection of greenhouse climate change, a multivariate signal or fingerprint of the enhanced greenhouse effect is defined using the zonal mean atmospheric temperature change as a function of height and latitude between equilibrium climate model simulations with control and doubled CO₂ concentrations. This signal is compared with observed atmospheric temperature variations over the period 1963 to 1988 from radiosonde-based global analyses. There is a significant increase of this greenhouse signal in the observational data over this period.These results must be treated with caution. Upper air data are available for a short period only, possibly too short to be able to resolve any real greenhouse climate change. The greenhouse fingerprint used in this study may not be unique to the enhanced greenhouse effect and may be due to other forcing mechanisms. However, it is shown that the patterns of atmospheric temperature change associated with uniform global increases of sea surface temperature, with El NinoSouthern Oscillation events and with decreases of stratospheric ozone concentrations individually are different from the greenhouse fingerprint used here.     

Flow resistance in the Great Belt,the biggest strait between the North Sea and the Baltic Sea

The Danish Straits are part of the transition area between the North Sea and the central Baltic Sea. More precisely, the Danish Straits connect Kattegat to the Arkona Basin and includes the relatively narrow and shallow sub-areas: Great Belt, Little Belt, Fehmarn Belt and Sound. The flow resistances in the straits are hydraulically determined by among other factors, the contractions, sills and stratification found in the straits. Close to the entrance to the Arkona Basin the Darss and Drogden Sills are located that trap inflowing dense water partially before it enters the central Baltic Sea. Hence, the resistances in the Danish Straits are of crucial importance for the stratification and ecosystems in the central Baltic Sea. The present work comprises calculations of flow resistance in the Great Belt based on measurements collected as part of the Great Belt Fixed Link investigations. The specific resistance in the Great Belt is determined to be an average of 41.2 × 10⁻¹² s² m⁻⁵, but it depends heavily on the interface position. When calculating long-term discharge time-series on the basis of the momentum equation it is advised to apply a seasonal varying resistance.     

PCB contamination from sampling equipment and packaging

Work reported in this paper suggests that there are cases of contamination of soil and water samples by polychlorinated biphenyls (PCB) from paper and plastic packaging. Soil samples, which have been stored in paper bags for more than 20 years, share a similar congener distribution as the bags. Analyses showed a predominance of light congeners. PCB-analyses of water also indicate that water samples could be contaminated by plastic packaging. All analytical results of solid material packaging, as well as soil stored in the packaging, show a high relative amount of light weight PCB congeners. The paper bags that were analysed are made of strong paper and very popular among geochemists because of their watertight quality. These paper bags were manufactured more than 20 years ago. The plastic packaging that was analysed was produced in 1997 and 2008. The analyses of plastic and paper show that the raw material that has been used in the production at different times contains a wide concentration range of PCB. Re-sealable plastic bags, which contained the highest levels of PCB of the plastic material, are used by researchers world-wide as sampling bags for soils and sediments. This paper raises an important issue that packaging may potentially contaminate the samples that they hold.