QUEST on DASI: a South Pole CMB polarization experiment

QUEST on DASI is a ground-based, high-sensitivity, high-resolution (ℓ_max2500) experiment designed to map CMB polarization at 100 and 150 GHz and to measure the power spectra from E-modes, B-modes from lensing of the CMB, and B-modes from primordial gravitational waves. The experiment comprises a 2.6 m Cassegrain optical system, equipped with an array of 62 polarization-sensitive bolometers (PSBs), located at the South Pole. The instrument is designed to minimize systematic effects; features include differencing of pairs of orthogonal PSBs within a single feed, a rotatable achromatic waveplate, and axisymmetric rotatable optics. In addition the South Pole location allows both repeatable and highly controlled observations. QUEST on DASI will commence operation in early 2005.     

Cycling of trace metals (Mn, Fe, Mo, U, V, Cr) in deep pore waters of intertidal flat sediments

Trace metals (Mn, Fe, Mo, U, Cr, V) were studied in pore waters of an intertidal flat located in the German Wadden Sea. The study system is an example of a permeable tidal flat system where pore water exchange is affected by tidal driven pressure gradients besides diffusion. Permanently installed in situ samplers were used to extract pore waters down to 5 m depth throughout one year. The samplers were either located close to the tidal flat margin or in central parts of the tidal flat. Despite dynamic sedimentological and hydrological conditions, the general trends with depth in deep tidal flat pore waters are remarkably similar to those observed in deep sea environments. Rates of trace metal cycling must be comparably large in order to maintain the observed pore water profiles. Trace metals further show similar general trends with depth close to the margin and in central parts of the tidal flat. Seasonal sampling revealed that V and Cr vary concurrent with seasonal changes in dissolved organic carbon (DOC) concentration. This effect is most notable close to the tidal flat margin where sulphate, DOC, and nutrients vary with season down to some metres depth. Seasonal variations of Mn, Fe, Mo, and U are by contrast limited to the upper decimetres of the sediment. Their seasonal patterns depend on organic matter supply, redox stratification, and particulate matter deposited on sediment surfaces. Pore water sampling within one tidal cycle provides evidence for pore water advection in margin sediments. During low tide pore water flow towards the creekbank is generated by a hydraulic gradient suggesting that deep pore waters may be seeping out of creekbank sediments. Owing to the enrichment of specific elements like Mn in pore water compared to sea water, seeping pore waters may have an impact on the chemistry of the open water column. Mass balance calculations reveal that the impact of deep pore waters on the Mn budget in the open water column is below 4%. Mn deep pore water discharge of the whole Wadden Sea is estimated to be about 9% of the total dissolved riverine Mn input into the Southern North Sea.     

Cyclotron amplification of geomagnetic micropulsations Pc1 in the magnetosphere

A numerical analysis of cyclotron instabilities is carried out by computing the dispersion relation for a three component cold plasma-beam system. Rates of growth and damping for various values of the stream density are calculated from the dispersion relation. The rates of growth and damping increase monotonically as the number density of the proton stream increases. It is found that the frequencies at the rates of maximum growth and the damping decrease slightly to lower frequencies and a sharp peak at these frequencies becomes blunt. The minimum e-folding times of an ion cyclotron wave for (a) σ_s = 10⁻⁴, σ_i = 10⁻² and (b) σ_s = 10⁻¹, σ_i = 10⁻² are about 3·84 and 0·16 sec respectively in the vicinity of the equatorial plane at 6 Re, where σ_s and σ_i are the ratios of the beam density N_s and the helium ion (H₆⁺) density N_i to the total positive ions in the plasma-beam system.     

Cycling the representer algorithm for variational data assimilation with a nonlinear reduced gravity ocean model

The representer method was used by [Ngodock, H.E., Jacobs, G.A., Chen, M., 2006. The representer method, the ensemble Kalman filter and the ensemble Kalman smoother: a comparison study using a nonlinear reduced gravity ocean model. Ocean Modelling 12, 378–400] in a comparison study with the ensemble Kalman filter and smoother involving a 1.5 nonlinear reduced gravity idealized ocean model simulating the Loop Current (LC) and the Loop Current eddies (LCE) in the Gulf of Mexico. It was reported that the representer method was more accurate than its ensemble counterparts, yet it had difficulties fitting the data in the last month of the 4-month assimilation window when the data density was significantly decreased. The authors attributed this failure to increased advective nonlinearities in the presence of an eddy shedding causing the tangent linear model (TLM) to become inaccurate. In a separate study [Ngodock, H.E., Smith, S.R., Jacobs, G.A., 2007. Cycling the representer algorithm for variational data assimilation with the Lorenz attractor. Monthly Weather Review 135 (2), 373–386] applied the cycling representer algorithm to the Lorenz attractor and demonstrated that the cycling solution was able to accurately fit the data within each cycle and beyond the range of accuracy of the TLM, once adjustments were made in the early cycles, thus overcoming the difficulties of the non-cycling solution. The cycling algorithm is used here in assimilation experiments with the nonlinear reduced gravity model. It is shown that the cycling solution overcomes the difficulties encountered by the non-cycling solution due to a limited time range of accuracy of the TLM. Thus, for variational assimilation applications where the TLM accuracy is limited in time, the cycling representer becomes a very powerful and attractive alternative, given that its computational cost is significantly lower than that of the non-cycling algorithm.     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

Crystallization processes in an artificial magma: variations in crystal shape,growth rate and composition with melt cooling history

A large (4.8 m³, 1.3x10⁷ g) artificial mafic melt with a bulk composition similar to that of a basalt (but with a high CaO content of 17 wt%) was generated during a demonstration of in situ vitrification and was allowed to cool naturally. During the melting process, convection was vigorous, resulting in a chemically and thermally homogeneous melt body. Once heating was complete, the cooling rate was rapid with the temperature dropping from 1500°C to 500°C in 6 days within the interior of the 3 m diameter, 1.5 m thick body. A 20 h period of constant temperature (1140°C) observed during colling was the result of latent heat released by widespread crystallization. The final crystalline assemblage consists of diopsidic to hedenbergitic pyroxene and anorthitic feldspar, with a subordinate amount of potassic feldspar, plus a small amount of evolved glass. The compositions and proportions of phases agree well with those predicted by the MELTS thermodynamic model. Thermal and textural evidence suggest that convection within the melt ceased coincident with formation of the first crystals. Textural investigation of core samples reveals large (up to 1 cm in length) acicular diopsidic pyroxenes in a matrix of smaller feldspar and zoned pyroxene crystals (500 m in length). Crystal shape and pyroxene composition vary as a function of position within the solidified body, as a function of cooling rate. Both crystal size and degree of crystallinity are highest in the central, most slowly-cooled parts of the rock. Crystal shape is characterized by tabular, equilibrium-growth forms in the slowly-cooled areas, grading to highly skeletal, dendritic forms at the rapidly-cooled edges of the body. The pyroxene crystals are dominantly homogeneous diopside, but crystals are characterized by thin Fe-rich hedenbergitic rims. These rims were deposited when Mg in the melt was depleted by diopside growth, and melt temperature had cooled sufficiently to allow Fe-rich pyroxene growth. Crystal growth rates can be calculated based on thermal behavior of the melt, reinforced by thermodynamic modelling, and are determined to be between 10^-7 and 10^-8 cm/s in the central part of the melt. These estimates agree well with growth rates in natural systems with similar cooling rates. Pyroxene crystals that formed at a higher cooling rates are characterized by higher Al and lower Mg contents relative to tabular equilibrium crystalline forms, presumably as a result of disequilibrium melt compositions at the crystal-melt interface.New Mexico Bureau of Mines and Mineral Resources, New Mexico Institute of Mining and Technology, Socorro, NM 87801, USA     

Geo–ecology and management of sensitive montane landscapes

Montane (alpine) areas are generally of high value for nature conservation. Such environments and the habitats they support are dynamic and often fragile. They are vulnerable to disturbance from a range of human activities and are responsive to climate changes over short and long timescales. Biodiversity and conservation values are closely linked to geological history, geomorphological processes and soils, and it is crucial that management systems are based on understanding these links.
There are many similarities between the Cairngorm Mountains (Scotland), the Giant Mountains (Czech Republic) and Abisko Mountains (Sweden) in terms of geology, geomorphology, ecology, links with biodiversity and high conservation importance. Comparable pressures and management issues involve, to varying degrees, a history of human use and impacts from deforestation, pasturing, grazing, recreation and atmospheric pollution. Landscape change therefore involves a complex interplay between natural and anthropogenic factors. Managing such change requires better understanding of the geo–ecological processes involved and the factors that determine landscape sensitivity. This is illustrated through a simple framework and examples from the three areas. Comparison of landscape sensitivity between similar montane areas, but in different geographic locations and climatic environments, should allow more informed management planning and a precautionary approach in advance of further changes in human activity and from predicted global warming scenarios.     

Distribution and morphology of sinkholes triggered by flooding following Tropical Storm Alberto at Albany, Georgia, USA

Flooding of the Flint River in July 1994 triggered the collapse of at least 312 sinkholes in the karstic Dougherty Plain at Albany, Georgia. We examined the distribution and morphology of these new sinkholes to evaluate the mode of formation, to characterize early stages of the evolution of sinkhole form, and to estimate the lowering of the surface associated with the development of new sinkholes.Eighty-eight percent of sinkholes occur inside the limits of flooding, especially in areas of sandy overburden, and they often follow joint-controlled linear trends. Sinkhole dimensions are log-normally distributed with median values of circumference = 5.7 m, length = 1.8 m, width = 1.6 m, and depth = 0.7 m; asymmetry (L:W) = 1.2. Cross-sectional forms range from narrow cylinders to large bowls, with many sinkholes having undercut sides.Flooding triggered the formation of sinkholes by saturating and liquefying overburden, which caused soil arches to collapse and flow into cavities in bedrock. The prevalence of sinkholes near the periphery of flooding suggests that drainage and loss of buoyant support as flood waters subsided may also have contributed to failure. A volume ratio index is used to quantify the three dimensional geometric form of sinkholes. Initially, small cylindrical shafts open over a bedrock joint, followed by progressive slumping that leads to widening and increases in volume to a final bowl form. Estimates of the aggregate volume of overburden transported underground in flooded areas range from 7,990 to 11,130 m3. Averaged over flooded areas, this accounts for 0.26 to 0.37 mm/km² lowering of the surface. Based on a 500 year recurrence interval for the flood event, values for lowering of the surface range from 0.52 to 0.74 mm per 1,000 years. These values are an order of magnitude less than estimates of carbonate dissolution and suggest that transport of overburden underground is limited by triggering events.     

探测冰盖和多年冻土层的融冰探头研发

The exploration of ice sheets by melting vertical holes into the ground has some tradition in terrestrial glaciology. Such probes have been used since the 1960's to investigate the vertical structure of the ice in Greenland and Antarctica and in alpine glaciers. In this paper we look into the possibility to develop similar devices for use on extraterrestrial icy bodies, like e.g. the polar areas on Mars or the icy satellites of the outer solar system. We report on some basic experiments performed in the cryo-vacuum laboratory of the Space Research Institute of the Austrian Academy of Sciences, Graz. In these experiments the penetration of a simple melting probe into compact and porous water ice (with a snow-like texture) was monitored, both under vacuum conditions and under air pressure. The observed penetration speeds for a given power supply are compared with a simple mathematical model. We conclude that a miniature melting probe with small overall dimensions and a reasonable power demand could well be part of the payload of a future planetary mission, for example to the poles of Mars. Such missions are currently under discussion in several space agencies. Moreover such probes could also e? ectively be used in terrestrial environments. A possible design is presented at the end of the paper.     

A furrow runs through it: An example of sustainable traditional irrigation in Western Cape Province,South Africa

Water and water related matters are important issues in water scarce countries like the Republic of South Africa. This is especially true for the agricultural sector that relies heavily on the availability of water for irrigation to ensure a secure food supply. In South Africa, present day irrigation projects rely on government subsidies and are usually large undertakings beyond the reach of individuals or small communities. The sustainability of such large irrigation projects is still a matter of debate. A 100 years ago a different set of rules applied. Irrigation could only be achieved by hand-dug furrows that supplied water in relatively small quantities to small farming communities. This paper investigated such a small community, the Leeukloof farming community in the Western Cape Province of the Republic of South Africa. For the past 93 years this community has maintained a furrow that supplies water not only to farms bordering the Perdeberg River, which supplies the furrow with water, but also to farms not bordering the river. The authors try to reconstruct the changes in agricultural practices brought about by the furrow, methods of water extraction during each phase, as well as the development and role of the furrow system. The perception by the community of the necessity of this method of water extraction from the river system is also investigated. This revised version was published online in July 2006 with corrections to the Cover Date.