The composition and crystallinity of the near-surface regions of weathered alkali feldspars

Our ability to identify thin non-stoichiometric and amorphous layers beneath mineral surfaces has been tested by undertaking X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) work on alkali feldspars from pH 1 dissolution experiments. The outcomes of this work were used to help interpret XPS and TEM results from alkali feldspars weathered for <10,000 years in soils overlying the Shap Granite (north-west England). The chemistry of effluent solutions indicates that silica-rich layers a few nanometers in thickness formed during the pH 1 experiments. These layers can be successfully identified by XPS and have lower Al/Si, Na/Si, K/Si and Ca/Si values than the outermost ∼9 nm of unweathered controls. Development of Al-Si non-stoichiometry is coupled with loss of crystal structure to produce amorphous layers that are identifiable by TEM where >∼2.5 nm thick, whereas the crystallinity of albite is retained despite leaching of Na to depths of tens to hundreds on nanometers. Integration of XPS data over the outermost 6-9 nm of naturally weathered Shap feldspars shows that they have stoichiometric Al/Si and K/Si ratios, which is consistent with findings of previous TEM work on the same material that they lack amorphous layers. There is some XPS evidence for loss of K from the outermost couple of nanometers of Shap orthoclase, and the possibility of leaching of Na from albite to greater depths cannot be excluded using the XPS or TEM results. This study demonstrates that the leached layer model, as formulated from laboratory experiments, is inapplicable to the weathering of alkali feldspars within acidic soils, which is an essentially stoichiometric reaction.     

Variation in element release rate from different mineral size fractions from the B horizon of a granitic podzol

Far-from-equilibrium batch dissolution experiments were carried out on the 2000–500, 500–250, 250–53 and 53–2 μm size fractions of the mineral component of the B horizon of a granitic iron humus podzol after removal of organic matter and secondary precipitates. The different size fractions were mineralogically and chemically similar, the main minerals present being quartz, alkali and plagioclase feldspar, biotite and chlorite. Specific surface area increased with decreasing grain size. The measured element release rates decreased in the order 53–2>>>2000–500>500–250>250–53 μm. Surface area normalised element release rates from the 2000–500, 500–250 and 250–53 μm size fractions (0.6–77×10⁻¹⁴ mol/m²/s) were intermediate between literature reported surface area normalised dissolution rates for monomineralic powders of feldspar (0.1–0.01×10⁻¹⁴ mol/m²/s) and sheet silicates (100×10⁻¹⁴ mol/m²/s) dissolving under similar conditions. Element release rates from the 53–2 μm fraction (400–3000×10⁻¹⁴ mol/m²/s) were a factor of 4–30 larger than literature reported values for sheet silicates. The large element release rate of the 53–2 μm fraction means that, despite the small mass fraction of 53–2 μm sized particles present in the soil, dissolution of this fraction is the most important for element release into the soil. A theoretical model predicted similar (within a factor of <2) bulk element release rates for all the mineral powders if observed thicknesses of sheet silicate grains were used as input parameters. Decreasing element release rates with decreasing grain size were only predicted if the thickness of sheet silicates in the powders was held constant. A significantly larger release rate for the 53–2 μm fraction relative to the other size fractions was only predicted if either surface roughness was set several orders of magnitude higher for sheet silicates and several orders of magnitude lower for quartz and feldspars in the 53–2 μm fraction compared to the other size fractions or if the sheet silicate thickness input in the 53–2 μm fraction was set unrealistically low. It is therefore hypothesised that the reason for the unpredicted large release rate from the 52–3 μm size fraction is due to one or more of the following reasons: (1) the greater reactivity of the smaller particles due to surface free energy effects, (2) the lack of proportionality between the BET surface area used to normalise the release rates and the actual reactive surface area of the grains and, (3) the presence of traces quantities of reactive minerals which were undetected in the 53–2 μm fraction but were entirely absent in the coarser fractions.     

Phytolith analysis from the archaeological site of Kush, Ras al-Khaimah, United Arab Emirates

Despite the wealth of archaeological sites and excellent conditions for preservation, few phytolith investigations have been undertaken from the Arabian Gulf region. The results from the Sasanian and Islamic archaeological tell of Kush, Ras al-Khaimah, United Arab Emirates, are presented. Kush is situated just inside the Gulf on an important trade route. The occupation sequence dates from the 4^th century A.D. until the 13^th century A.D., recording the development of the site in the Sasanian period, followed by the arrival of Islam in the 7^th century A.D. and the final abandonment of the site in the late 13^th century when the nearby site of al-Mataf (Julfar) began to develop closer to the present day coastline. All the samples analyzed contained abundant phytoliths (short cells, elongated cells, and groups of elongated cells) of various types. They included date palm (Phoenix dactylifera), papillae (possibly from barley (Hordeum)), and hair cells possibly from species of canary grass (Phalaris spp.). Some researchers have suggested that groups of elongated cells may indicate the presence of irrigation in semiarid environments. The present results for this class of phytoliths appeared to imply that intensive irrigation was unlikely to have taken place around Kush.     

Trough structures in the Western syenite of Kûngnât, S Greenland: mineralogy and mechanism of formation

In the Western layered syenite stock of the Kûngnât complex, close to the intrusion wall, there are two groups of regularly spaced, horizontally aligned, stacks of infilled troughs. These features resemble, to some extent, the trough layering within the UZa trough zone of the gabbroic Skaergaard¹ intrusion. Such features have never before been described in syenitic rocks. The lower group comprises six stacks of infilled troughs; the upper group comprises seven. The two groups are vertically separated by about 10 m of sparsely layered syenite. The infilled troughs in the upper group are stacked vertically; those in the lower group gradually shift laterally and appear to converge over an antiformal structure. It is not possible to measure the plunge of the troughs due to outcrop geometry. Troughs are up to about 80 cm deep. The material filling the troughs is more melanocratic than the syenite that surrounds them. Individual troughs exhibit normal grading. The syenite within the troughs contains large amphibole and biotite oikocrysts. Faintly layered syenite occurs laterally between stacks. Minerals in the host syenite are more ferroan than those in the troughs, this is thought to represent re-equilibration with residual melt. Feldspar textures, irregular pyroxene and apatite zoning, and the presence of irregular shaped amphibole patches within pyroxene grains all imply alteration by a pervasive deuteric fluid in both troughs and host syenite. We suggest the following hypothesis for the formation of the troughs. A mafic crystal sheath which grows on the walls of the magma chamber becomes detached and flows downwards. The descending slurry forms a series of regularly spaced streams which erode trough shaped channels into the crystal pile at the base of the chamber. Uneroded crystal material separates the channels. Crystals are deposited from these streams. Successive streams flow over each other to generate stacks of troughs.     

A preliminary investigation into the use of ochre as a remedial amendment in arsenic-contaminated soils

Ochre is an unwanted waste product that accumulates in wetlands and streams draining abandoned coal and metal mines. A potential commercial use for ochre is to remediate As contaminated soil. Arsenic contaminated soil (605 mg kg⁻¹) was mixed with different ochres (A, B and C) in a mass ratio of 1:1 and shaken in 20 mL of deionised water. After 72 h As concentration in solution was ca. 500 μg kg⁻¹ in the control and 1–2.5 μg kg⁻¹ in the ochre treated experiments. In a second experiment soil:ochre mixtures of 0.05–1:1 were shaken in 20 mL of deionised water for 24 h. For Ochres A and C, as solution concentration was reduced to ca. 1 μg kg⁻¹ by 0.2–1:1 ochre:soil mixtures. For Ochre B, as concentration only reached ca. 1 μg kg⁻¹ in the 1:1 ochre:soil mix. Sorption of As was best modelled by a Freundlich isotherm using As sorption per mass of goethite in the ochre (log K = 1.64, n = 0.79, R² = 0.76, p 0.001). Efficiency of ochre in removing As from solution increased with increasing total Fe, goethite, citrate dithionite extractable Fe and surface area.     

Supraglacial weathering crust dynamics inferred from cryoconite hole hydrology

Water levels in cryoconite holes were monitored at high resolution over a 3‐week period on Austre Brøggerbreen (Svalbard). These data were combined with melt and energy balance modelling, providing insights into the evolution of the glacier's near‐surface hydrology and confirming that the hydrology of the near‐surface, porous ice known as the ‘weathering crust’ is dynamic and analogous to a shallow‐perched aquifer. A positive correlation between radiative forcing of melt and drainage efficiency was found within the weathering crust. This likely resulted from diurnal contraction and dilation of interstitial pore spaces driven by variations in radiative and turbulent fluxes in the surface energy balance, occasionally causing ‘sudden drainage events’. A linear decrease in water levels in cryoconite holes was also observed and attributed to cumulative increases in near‐surface ice porosity over the measurement period. The transport of particulate matter and microbes between cryoconite holes through the porous weathering crust is shown to be dependent upon weathering crust hydraulics and particle size. Cryoconite holes therefore yield an indication of the hydrological dynamics of the weathering crust and provide long‐term storage loci for cryoconite at the glacier surface. This study highlights the importance of the weathering crust as a crucial component of the hydrology, ecology and biogeochemistry of the glacier ecosystem and glacierized regions and demonstrates the utility of cryoconite holes as natural piezometers on glacier surfaces. Copyright © 2015 John Wiley & Sons, Ltd.     

Back to the future: reflections and directions of South African marine bioinvasion research

Biological invasions continue to increase around the world, with impacts on many coastal marine systems. Here we review the South African marine invasion literature which, despite the field being relatively new, has grown to have significant presence in both the local and international arenas. Of the 79 papers reviewed, 70% focused on the establishment and spread of alien species, with modes of transport and introduction largely overlooked. An emphasis was also apparent towards field studies, in particular survey work, with few experimental studies. The overwhelming majority of papers focused on a single species, the Mediterranean mussel Mytilus galloprovincialis, reflecting the scale of this invasion and the tractable nature of rocky shores as study systems. With the exception of this one species, the impacts of marine alien species have rarely been quantified. We suggest that future research extends the taxonomic coverage of present work and develops a better understanding of the mechanisms of introduction, establishment and spread of marine alien species. Through an experimental approach, the drivers of altered ecological patterns and processes resulting from invasions should be addressed, providing insight into associated impacts. This approach will maintain the local applicability and international relevance of South African marine invasion research.     

星载激光光斑影像激光指向变化探测法

地面光斑足印的定位精度高度依赖于激光指向角的测量精度,星载激光光斑质心提取及其变化规律对激光指向角的分析具有重要的意义。本文基于ICESat/GLAS的激光剖面阵列（laser profile array,LPA）影像数据,首先利用灰度一阶矩阵法提取LPA的质心,精度优于0.3个像素,LPA相对定位精度优于0.11个像素。其次利用傅里叶变换和傅里叶级数拟合对LPA质心坐标的变化进行周期探测和建模分析,结果表明,激光光斑影像的质心坐标存在1.83×10^-4 Hz、3.36×10^-4 Hz、5.19×10^-4 Hz和6.71×10^-4 Hz 4个明显的周期变化,拟合结果的相关性R²达到了0.86,拟合精度可达0.4″,优于0.13个像素,得到了较好的结果。可为我国的高分七号和后续的卫星激光测高数据处理提供参考。