Glacial tectonics and deposition of stratified drift during formation of tills beneath an active glacier – examples from Skåne, southern Sweden

Åmark, Max 1986 06 01: Glacial tectonics and deposition of stratified drift during formation of tills beneath an active glacier – examples from Skåne, southern Sweden. Boreas , Vol. 15, pp. 155–171. Oslo. ISSN 0300–9483.
Three exposures in till have been investigated in Skåne, southern Sweden. The tills were deposited at the base of an active glacier, and are largely made up of subglacially deposited stratified drift. Deformation of the till took place syndepositionally, resulting in high-angle fractures, clastic dikes, shear planes and folds, and in irregular deformational structures. The stratified drift was transformed into a more or less diamicton-like material by the deformation. The orientation of clasts was influenced by the action of the subglacial meltwater and the shearing from the overriding glacier. The tills accumulated at most 100 km inside the margin of the receding glacier.     

An Example of Island-Arc Petrogenesis: Geochemistry and Petrology of the Southern Luzon Arc, Philippines

Volcanism throughout the Luzon arc is associated with eastwardsubduction of the South China Sea floor along the Manila Trench.The southern section of the arc, the focus of this study, extendsfrom the Lingayen-Dingalan fault to the small islands just southof Luzon. Two segments appear to exist along this section ofthe arc the northern Bataan and southern Mindoro segments whichare separated by the Macolod Corridor. The volcanic rocks have typical arc phenocryst mineralogies:olivine, clinopyroxene, plagioclase, and titanomagnetite inthe most mafic rocks and clinopyroxene, plagioclase, orthopyroxene,titanomagnetite, ? amphibole in the more felsic samples. Complexzoning, sieve textures, and decoupling of incompatible traceelements suggest that processes such as assimilation have takenplace. The rocks from the study area range from basalts to rhyolitesand show typical calc-alkaline features. The rocks of the MacolodCorridor and Mindoro segment are particularly enriched in largeion lithophile elements (LILE), light rare earth elements (LREE),and radiogenic Sr compared with the Bataan segment. The datafall within the mantle array on Sr-Nd isotopic diagrams andgrade toward higher Sr and lower Nd isotopic values from northto south. A likely source for the volcanics of this study is either amid-ocean ridge basalt (MORB)-type mantle that undergoes higherdegrees of partial melting than regions involved in MORB generationor a previously depleted source. We suggest that the high fieldstrength element (HFSE) anomalies have been derived throughdifferential element partitioning during fluid transport fromthe subducted lithosphere to the mantle wedge. Continental crustal material seems to play a significant roleparticularly in the Macolod Corridor and the Mindoro segment,based on the high LILE, La/Sm ratios, radiogenic Sr isotopes,and ¹⁸O values. The Macolod Corridor and the Mindoro segmenthave undergone source contamination by crustal material fromthe North Palawan-Mindoro crustal block either during the collisionof this block with the Manila Trench or by subduction of sedimentsrich in this crustal material. A similar component has alsobeen detected in the Bataan segment but in minor amounts. Thetrace element and isotopic differences between the northernand southern sections of the arc are interpreted in terms ofvariable composition (i. e., variable amounts of a crustal componentintroduced from the Palawan-Mindoro crustal terrain) of themetasomatic fluids released into the source.     

Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The Physico-Chemical Properties of a Subducted Slab from Garnet Zonation Patterns (Sesia Zone, Western Alps)

Garnets in continentally derived high-pressure (HP) rocks ofthe Sesia Zone (Western Alps) exhibit three different chemicalzonation patterns, depending on sample locality. Comparisonof observed garnet zonation patterns with thermodynamicallymodelled patterns shows that the different patterns are causedby differences in the water content of the subducted protolithsduring prograde metamorphism. Zonation patterns of garnets inwater-saturated host rocks show typical prograde chemical zonationswith steadily increasing pyrope content and increasing XMg,together with bell-shaped spessartine patterns. In contrast,garnets in water-undersaturated rocks have more complex zonationpatterns with a characteristic decrease in pyrope and XMg betweencore and inner rim. In some cases, garnets show an abrupt compositionalchange in core-to-rim profiles, possibly due to water-undersaturationprior to HP metamorphism. Garnets from both water-saturatedand water-undersaturated rocks show signs of intervening growthinterruptions and core resorption. This growth interruptionresults from bulk-rock depletion caused by fractional garnetcrystallization. The water content during burial influences significantly thephysical properties of the subducted rocks. Due to enhancedgarnet crystallization, water-undersaturated rocks, i.e. thoselacking a free fluid phase, become denser than their water-saturatedequivalents, facilitating the subduction of continental material.Although water-bearing phases such as phengite and epidote arestable up to eclogite-facies conditions in these rocks, dehydrationreactions during subduction are lacking in water-undersaturatedrocks up to the transition to the eclogite facies, due to thethermodynamic stability of such hydrous phases at high P–Tconditions. Our calculations show that garnet zonation patternsstrongly depend on the mineral parageneses stable during garnetgrowth and that certain co-genetic mineral assemblages causedistinct garnet zonation patterns. This observation enablesinterpretation of complex garnet growth zonation patterns interms of garnet-forming reactions and water content during HPmetamorphism, as well determination of detailed P–T paths. KEY WORDS: dehydration; high-pressure metamorphism; Sesia Zone; subduction; thermodynamic modelling     

Free allocation in the 3rd EU ETS period: assessing two manufacturing sectors

This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.

Policy relevance

After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies.     

International and national climate policies for aviation: a review

Aviation constitutes about 2.5% of all energy-related CO₂ emissions and in addition there are non-CO₂ effects. In 2016, the ICAO decided to implement a Carbon Offsetting and Reduction Scheme for International Aviation (CORSIA) and in 2017 the EU decided on faster emission reductions in its Emissions Trading System (EU ETS), which since 2012 includes the aviation sector. The effects of these policies on the expected development of air travel emissions from 2017 to 2030 have been analyzed. For the sample country Sweden, the analysis shows that when emissions reductions in other sectors are attributed to the aviation sector as a result of the EU ETS and CORSIA, carbon emissions are expected to reduce by ?0.8% per year (however if non-CO₂ emissions are included in the analysis, then emissions will increase). This is much less than what is needed to achieve the 2°C target. Our analysis of potential national aviation policy instruments shows that there are legally feasible options that could mitigate emissions in addition to the EU ETS and CORSIA. Distance-based air passenger taxes are common among EU Member States and through increased ticket prices these taxes can reduce demand for air travel and thus reduce emissions. Tax on jet fuel is an option for domestic aviation and for international aviation if bilateral agreements are concluded. A quota obligation for biofuels is a third option.

Key policy insights

• Existing international climate policies for aviation will not deliver any major emission reductions.

• Policymakers who want to significantly push the aviation sector to contribute to meeting the 2°C target need to work towards putting in place tougher international policy instruments in the long term, and simultaneously implement temporary national policy instruments in the near-term.

• Distance-based air passenger taxes, carbon taxes on jet fuel and quota obligations for biofuels are available national policy options; if they are gradually increased, and harmonized with other countries, they can help to significantly reduce emissions.

     

Tectonic versus chemical-weathering controls on the composition of fluvial sands in tropical environments

The compositions of fluvial sands collected in mountainous regions along the volcanic front in Central America and along the Andean front in Venezuela and Colombia correlate with the tectonic setting of their source terrains. The sands derived from the Central American volcanic arc are compositionally distinct from those derived from the Andean terrains, and minor variations in tectonic style can also be discriminated. Subtle differences in tectonic setting and source rock composition are recognizable only when modification by chemical weathering is slight; they are strongest in sands from low-order streams draining mountainous areas with modest alluvial-plain development. Sands that have been exposed to weathering for extended periods during alluvial storage are progressively enriched in chemically stable phases. With increased weathering, sands from continental terrains converge toward a supermature quartz arenite end member, and the imprint left by source rock composition and tectonic setting is obscured. In intraoceanic terrains, a similar but much less pronounced enrichment in stable phases relative to less-stable phases is observed, similarly overprinting the tectonic signal. Although detailed tectonic information is easily lost, sands derived from intraoceanic terrains are distinguishable from those derived from continental terrains even after long exposure to intense chemical-weathering conditions.     

The shelf sand-plume model: a critique

In recent years, a new model for deposition of sand bodies in a shelf environment has appeared. This model, known as the shelf sand-plume model, is hypothesized to result from storm-driven currents that are deflected around a deltaic headland, stripping sand from the headland and redepositing it in a downcurrent ‘plume’ on the inner shelf. The modern analogue for this model is considered to be an arcuate shelf sand body located off the Damietta branch of the Nile Delta. However, the distribution of older deltaic and shoreline sands probably controls the arcuate outline of the sand body. The present current system has certainly reworked these sands into ridges and large-scale bedforms but is not responsible for the overall outline of the sand body. Grain-size range and distribution of sand on the shelf demonstrate that the source of sand in the Nile shelf sand body is not the modern Damietta headland as postulated by the shelf sandplume model. In our view, the shelf sand-plume model is presently unsubstantiated and has orginated as a misapplication of the original Nile example. As a geological model, the shelf sand-plume model lacks a set of observable, consistently applicable criteria. The only common denominator to the model is the ‘plume’ geometry of a sand body located off a deltaic promontory. However, workers postulating the existence of shelf sand-plumes have neither clearly established a ‘plume’ geometry nor shown the juxtaposition of these bodies with respect to coeval deltaic headlands in their outcrop or subsurface examples. The model does not provide criteria to distinguish a ‘shelf sand-plume’ from other classes of shelf sand bodies, notably sand ridges and storm-generated sheet-like sands. Its application to the rock record should be re-evaluated.