Planar deformation features and impact glass in inclusions from the Vredefort Granophyre,South Africa

Abstract— The Vredefort Granophyre represents impact melt that was injected downward into fractures in the floor of the Vredefort impact structure, South Africa. This unit contains inclusions of country rock that were derived from different locations within the impact structure and are predominantly composed of quartzite, feldspathic quartzite, arkose, and granitic material with minor proportions of shale and epidiorite. Two of the least recrystallized inclusions contain quartz with single or multiple sets of planar deformation features. Quartz grains in other inclusions display a vermicular texture, which is reminiscent of checkerboard feldspar. Feldspars range from large, twinned crystals in some inclusions to fine‐grained aggregates that apparently are the product of decomposition of larger primary crystals. In rare inclusions, a mafic mineral, probably biotite or amphibole, has been transformed to very fine‐grained aggregates of secondary phases that include small euhedral crystals of Fe‐rich spinel. These data indicate that inclusions within the Vredefort Granophyre were exposed to shock pressures ranging from <5 to 8–30 GPa. Many of these inclusions contain small, rounded melt pockets composed of a groundmass of devitrified or metamorphosed glass containing microlites of a variety of minerals, including K‐feldspar, quartz, augite, low‐Ca pyroxene, and magnetite. The composition of this devitrified glass varies from inclusion to inclusion, but is generally consistent with a mixture of quartz and feldspar with minor proportions of mafic minerals. In the case of granitoid inclusions, melt pockets commonly occur at the boundaries between feldspar and quartz grains. In metasedimentary inclusions, some of these melt pockets contain remnants of partially melted feldspar grains. These melt pockets may have formed by eutectic melting caused by inclusion of these fragments in the hot (650 to 1610 °C) impact melt that crystallized to form the Vredefort Granophyre.     

Stochastic modelling of groundwater flow and solute transport in aquifers

This paper presents an introductory overview of recently developed stochastic theories for tackling spatial variability problems in predicting groundwater flow and solute transport. Advantages and limitations of the theories are discussed. Lastly, strategies based on the stochastic approaches to predict solute transport in aquifers are recommended.     

Isolation of resonance in acoustic backscatter from elastic targetsusing adaptive estimation schemes

It has been shown that at certain frequencies the acoustic backscatter from elastic targets exhibits certain resonance behavior which closely relates to the physical properties of the target such as dimension, thickness, and composition. The purpose of this paper is to develop an automated approach for identifying the presence of resonance in the acoustic backscatter from an unknown underwater target by isolating the resonance part from the specular contribution. An adaptive transversal filter structure is used to estimate the specular part of the backscatter and consequently the error signal would provide an estimate of the resonance part. An important aspect of this scheme lies in the fact that it does not require an underlying model for the elastic return. The adaptation rule is based upon fast recursive least squares (RLS) learning. The approach taken in this paper is general in the sense that it can be applied to targets of unknown geometry and thickness and, further, does not require any a priori information about the target and/or the environment. Test results on acoustic data are presented which indicate the effectiveness of the proposed approach     

“BASS 300 PARACOM”: a “model” underwaterparametric communication system

Parametric transduction offers valuable advantages for underwater acoustic communications. Perhaps the most significant benefit is the fact that high directivity is achieved by means of a physically small transmit transducer. This feature may, ultimately, be employed to permit long-range, low-frequency communication using a compact source. The high directivity is desirable to combat multipath propagation and to achieve data communications in water which is shallow by comparison with range. A real-time, high data-rate “model” differential phase shift keying (DPSK) communication system has been constructed and demonstrated. This system uses parametric transduction, with a 300-kHz primary frequency and a 50-kHz secondary frequency. Experimental results show that the system can be employed to combat multipath propagation in shallow water and can achieve high data-rate text and color image transmission at 10 and 20 kb s^-1 for 2-DPSK and 4-DPSK, respectively, through a transmission bandwidth of 10 kHz. The “model” system was developed to confirm performance predictions for a future, operational long-range link employing a 50-kHz primary frequency and a 5-kHz secondary frequency     

Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

A reanalysis of the light curve of RT Persei with the W-D code

The UBV photometric observations of RT Per, from Sanwal and Chaubey (1981), were analyzed by the Wilson and Devinney code (1971). The light curves include reflection effects that for the first time has been suggested by Dugan (1911). RT Per has a semi-detached configuration where the lower-mass component is in contact with its respective Roche surface. The higher-mass component very nearly fills its Roche lobe. It has the characteristic of an Algol type system. The absolute dimensions for the primary and secondary of this system were calculated from its spectral types and by combining the photometric solution with inferred component radial velocities (Lu, 1990).     

Is the transition impact to post‐impact rock complete? Some remarks based on XRF scanning,electron microprobe,and thin section analyses of the Yaxcopoil‐1 core in the Chicxulub crater

Abstract The transition from impact to post‐impact rocks in the Yaxcopoil‐1 (Yax‐1) core is marked by a 2 cm‐thick clay layer characterized by dissolution features. The clay overlies a 9 cm‐thick hardground, overlying a 66 cm‐thick crossbedded unit, consisting of dolomite sandstone alternating with thin micro‐conglomerate layers with litho‐ and bioclasts and the altered remains of impact glass, now smectite. The micro‐conglomerates mark erosion surfaces. Microprobe and backscatter SEM analysis of the dolomite rhombs show an early diagenetic, complex‐zoned, idiomorphic overgrowth, with Mn‐rich zones, possibly formed by hot fluids related to cooling melt sheet in the crater. The pore spaces are filled with several generations of coelestite, barite, K‐feldpar, and sparry calcite. XRF core scanning analysis detected high Mn values in the crossbedded sediments but no anomalous enrichment of the siderophile elements Cr, Co, Fe, and Ni in the clay layer. Shocked quartz occurs in the crossbedded unit but is absent in the clay layer. The basal Paleocene marls are strongly dissolved and do not contain a basal Paleocene fauna. The presence of a hardground, the lack of siderophile elements, shocked quartz, or Ni‐rich spinels in the clay layer, and the absence of basal Paleocene biozones P0 and Pa all suggest that the top of the ejecta sequence and a significant part of the lower Paleocene is missing. Due to the high energy sedimentation infill, a hiatus at the top of the impactite is not unexpected, but there is nothing in the biostratigraphy, geochemistry, and petrology of the Yax‐1 core that can be used to argue against the synchroneity of the end‐Cretaceous mass‐extinctions and the Chicxulub crater.     

Geochemistry of metabauxites in the Bergsträsser Odenwald (Mid German Crystalline Rise) and palaeoenvironmental implications

Summary Pre- to early Variscan metamorphosed volcano-sedimentary series of the western (Bergstr?sser) Odenwald have been intruded by Variscan calc-alkaline magmatites with plate margin affinities. Within the NE-SW trending metabasic and metapelitic series, intercalations of anomalously aluminous- and iron-rich compositions representing former bauxites are distinguishable. Geochemical data indicate that the Al-, Fe-rich rocks are the metamorphic equivalents of a former bauxitic-ferralitic weathering profile, now comprising spinel fels (top) with relics of pisolitic structures, corundum-chlorite fels, corundum-cordierite-plagioclase gneiss, sillimanite-cordierite-plagioclase gneiss, cordierite-plagioclase gneiss and kinzigite (base) displaying a decrease of weathering in the order as listed. The evolution of such terrestrial sediments is related to specific climatic, environmental, and physico-chemical conditions similar to those of the present-day tropical to subtropical humid regions with high seasonal rains and intensive drainage. Comparison with palaeomagnetic and palaeoclimatic data indicate that the Odenwald metabauxites originally formed during the Lower to Mid-Devonian. Our results imply that, during this geological time span, parts of the precursors of the Mid-German Crystalline Rise not only transversed low latitudes but also were exposed to terrestrial weathering.

---

Zusammenfassung Die Geochemie der Metabauxite im Bergstr?sser Odenwald (Mitteldeutsche Kristallinschwelle) und ihre Bedeutung für das Pal?omilieu Im westlichen (Bergstr?sser) Odenwald intrudierten variszische Plattenrand-Kalkalkali-Magmatite in pr?- bis früh-variszische, ehemalige vulkano-sediment?re Serien. Innerhalb der heute NE-SW streichenden Metabasit- und Metapelitzüge treten lokal Al-Fe-reiche Einschaltungen auf, die strukturell und geochemisch als metamorphe ?quivalente eines ehemaligen bauxitisch-ferralitischen Verwitterungsprofils klassifiziert werden k?nnen. Sie umfassen Spinellfelse mit erhaltenen, ehemaligen zonierten Pisolithen, Korund-Chloritfelse, Korund-Cordierit-Plagioklasgneise, Sillimanit-Cordierit-Plagioklasgneise, Cordierit-Plagioklasgneise und Kinzigite. Bauxite k?nnen als terrestrische Bildungen nur unter speziellen klimatischen und physiko-chemischen Bedingungen entstehen. Pal?omagnetische und pal?oklimatische Daten legen die Bildung der ehemaligen Bauxite im unteren bis mittleren Devon nahe. Daraus folgt, da? w?hrend dieser geologischen Zeitspanne die Vorl?ufer der mitteldeutschen Kristallinschwelle bei der Norddrift nicht nur ?quatorn?he passierten, sondern auch partiell ungest?rte, terrestrische, tropisch-subtropische Verwitterungsprozesse abliefen.

---

---

Received June 10, 1999; revised version accepted October 30, 2000