Determination of subcatchment and watershed boundaries in a complex and highly urbanized landscape

Urban development significantly alters the landscape by introducing widespread impervious surfaces, which quickly convey surface run‐off to streams via stormwater sewer networks, resulting in “flashy” hydrological responses. Here, we present the inadequacies of using raster‐based digital elevation models and flow‐direction algorithms to delineate large and highly urbanized watersheds and propose an alternative approach that accounts for the influence of anthropogenically modified land cover. We use a semi‐automated approach that incorporates conventional drainage networks into overland flow paths and define the maximal run‐off contributing area. In this approach, stormwater pipes are clustered according to their slope attributes, which define flow direction. Land areas drained by each cluster and contributing (or exporting) flow to a topographically delineated catchment were determined. These land masses were subsequently added or removed from the catchment, modifying both the shape and the size. Our results in a highly urbanized Toronto, Canada, area watershed indicate a moderate net increase in the directly connected watershed area by 3% relative to a topographically forced method; however, differences across three smaller scale subcatchments are greater. Compared to topographic delineation, the directly connected watershed areas of both the upper and middle subcatchments decrease by 5% and 8%, respectively, whereas the lower subcatchment area increases by 15%. This is directly related to subsurface storm sewer pipes that cross topographic boundaries. When directly connected subcatchment area is plotted against total streamflow and flashiness indices using this method, the coefficients of variation are greater (0.93 to 0.97) compared to the use of digital elevation model‐derived subcatchment areas (0.78 to 0.85). The accurate identification of watershed and subcatchment boundaries should incorporate ancillary data such as stormwater sewer networks and retention basin drainage areas to reduce water budget errors in urban systems.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Pole-to-pole moisture conditions for the IGY

Summary A study of the mean atmospheric humidity conditions on a planetary scale during the IGY covering the calendar year 1958 is presented. The fields of mean precipitable water content and of the zonal and meridional transports of water vapor are analyzed for the entire globe. Zonally averaged values of the various quantities at several levels are presented in tabular form and compared whenever possible with previous results or indirectly are analyzed on the basis of information obtained from different sources. The structure of these fields is studied and the corresponding implications for the general circulations of the atmosphere are discussed. Finally the zonal water balance for all the globe is discussed and its implications analyzed.     

Swath mapping of the seafloor and its application to deep-bottom fisheries in New Caledonia

A bottom longline fishery operated in the EEZ of New Caledonia from 1988 to 1991. Fishing focused on five seamounts with summits at depths ranging from 500 to 750 m. The target species was alfonsino, Beryx splendens. As the soundings available from marine charts were not detailed enough, the fishing masters had to make their own charts in order to set the gear in the right location. A series of 11 scientific cruises devoted to a research program on alfonsino was launched in late 1991. During the first scientific cruises, several days were spent mapping the seabed to improve the existing knowledge of the topography of three seamounts by coupling the EDO echosounder depth measurements to the GPS positions. As this procedure is slow, it is applicable to limited areas or, if a wider grid is used, to large zones to locate major structures such as ridges and seamounts. The emergence of the multibeam echosounder has greatly improved seabed mapping performance. This tool seems to fit the requirement of exploratory deep-bottom fishing particularly well, as it covers large areas while providing details of the bottom. The EM 12 was used to obtain bathymetry and imagery of the SE portion of the EEZ of New Caledonia, covering an approximate area of 70,000 km² in two weeks. For depths ranging from 500 to 4,500 m, the results were impressive. They confirmed the known major features and provided greater topographical detail, revealing fine unknown structures. They also provided information on the type of substratum, information which might influence the fishing strategy. Finally, they made it possible to obtain an accurate estimate of the exploitable area which in turn led to new stock estimates.     

Otolith shape as a stock discrimination tool for ling (Genypterus blacodes) in the fjords of Chilean Patagonia

ABSTRACT

Genypterus blacodes, in terms of its fishing history and local economic importance, is an emblematic species harvested in Chilean Patagonia (41°00’–57°00’S). Most of the current fisheries and biological knowledge of this species come from the open ocean, whereas information about the species in fjords and inner channels is fragmentary. In 2018, two research surveys targeting G. blacodes were conducted in the fjords and inner channels of Chilean Patagonia. A total of 253 pairs of sagittal otoliths were sampled at three different localities, and their contours were modelled using wavelet analysis as a tool for stock discrimination. Contours were compared using canonical analysis, and classification was performed using linear discriminant and Random Forest analyses. The results indicated that the wavelet method is efficient in modelling otolith contours, and the discriminant analyses showed differences among fishing grounds across the latitudinal gradient, thus confirming the hypothesis that G. blacodes conform to at least two separate stock units in Chilean Patagonia. Fishing grounds that were closer in space showed higher levels of misclassification. The discussion focuses on how environmental variables and the geography of fjords shape stock differences and how this information can be used for the sustainable management of G. blacodes.     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Design and projected performance of a flapping foil AUV

The design and construction of a biomimetic flapping foil autonomous underwater vehicle is detailed. The vehicle was designed as a proof of concept for the use of oscillating foils as the sole source of motive power for a cruising and hovering underwater vehicle. Primary vehicle design requirements included scalability and flexibility in terms of the number and placement of foils, so as to maximize experimental functionality. This goal was met by designing an independent self-contained module to house each foil, requiring only direct current power and a connection to the vehicle's Ethernet local area network for operation. The results of tests on the foil modules in the Massachusetts Institute of Technology (MIT) Marine Hydrodynamics Water Tunnel and the MIT Ship Model Testing Tank are both used to demonstrate fundamental properties of flapping foils and to predict the performance of the specific vehicle design based on the limits of the actuators. The maximum speed of the vehicle is estimated based on the limitations of the specific actuator and is shown to be a strong function of the vehicle drag coefficient. When using four foils, the maximum speed increases from 1 m/s with a vehicle C/sub D/ of 1.4 to 2 m/s when C/sub D/=0.1, where C/sub D/ is based on vehicle frontal area. Finally, issues of vehicle control are considered, including the decoupling of speed and pitch control using pitch-biased maneuvering and the tradeoff between actuator bandwidth and authority during both the cruising and hovering operation.     

Oxidative stress in Laeonereis acuta (Polychaeta, Nereididae): environmental and seasonal effects

Laeonereis acuta was seasonally collected in an industrially polluted site (P) and in an unpolluted site (UP) at the Patos Lagoon estuary (southern Brazil). Glutathione S-transferase (GST), superoxide dismutase (SOD) and catalase (CAT) activity (U/mg protein) was determined in five groups of worms from each site. Metallothionein (MT - mol GSH/g ww) and lipid peroxides content (LPO - nmoles of cumene hydroperoxide/g ww) were also measured. Annual mean values for CAT (UP=3.7+/-0.3; P=5.7+/-0.6), GST (UP=0.034+/-0.003; P=0.045+/-0.004) and MT (UP=0.15+/-0.02; P=0.23+/-0.03) were higher (p<0.05) in worms from the P site. In autumn, CAT activity was higher (p<0.05) in worms from the P site (7.6 +/- 1.3) than in those from the UP site (3.6 +/- 0.4). In summer, MT concentration was higher in worms from the P site (0.37 +/- 0.03) than in those from the UP site (0.19 +/- 0.01). No significant difference (p>0.05) in the LPO content was observed in worms from the different sites or collected in different seasons. These results indicate that worms from the polluted site showed higher antioxidant responses than those from the unpolluted site, sufficient to prevent oxidative damage in terms of LPO.     

Frequency-spectra solutions for multiperiodic variable stars: Analysis and interpretation of artificial data

An accurate and extensive analysis on the present possibility of obtaining definite, unambiguous frequency-spectra solutions for multiperiodic -Scuti stars has been performed using artificial data. Some convenient photometric data sampling techniques have been adopted to produce very realistic light curves, with gaps and noise and subsequently critically analyzed. Useful suggestions about those to adopt in order to detect very low-amplitude components of the signal have been inferred.The results obtained point out the need of extensive devoted series of measurements, spread over a very long time span and also over a wide baseline of observers.