Effects of magnetic interactions in anisotropy of magnetic susceptibility: Models, experiments and implications for igneous rock fabrics quantification

Besides granites of the ilmenite series, in which the anisotropy of magnetic susceptibility (AMS) is mainly controlled by paramagnetic minerals, the AMS of igneous rocks is commonly interpreted as the result of the shape-preferred orientation of unequant ferromagnetic grains. In a few instances, the anisotropy due to the distribution of ferromagnetic grains, irrespective of their shape, has also been proposed as an important AMS source. Former analytical models that consider infinite geometry of identical and uniformly magnetized and coaxial particles confirm that shape fabric may be overcome by dipolar contributions if neighboring grains are close enough to each other to magnetically interact. On these bases we present and experimentally validate a two-grain macroscopic numerical model in which each grain carries its own magnetic anisotropy, volume, orientation and location in space. Compared with analytical predictions and available experiments, our results allow to list and quantify the factors that affect the effects of magnetic interactions. In particular, we discuss the effects of (i) the infinite geometry used in the analytical models, (ii) the intrinsic shape anisotropy of the grains, (iii) the relative orientation in space of the grains, and (iv) the spatial distribution of grains with a particular focus on the inter-grain distance distribution. Using documented case studies, these findings are summarized and discussed in the framework of the generalized total AMS tensor recently introduced by Cañon-Tapia (Cañon-Tapia, E., 2001. Factors affecting the relative importance of shape and distribution anisotropy in rocks: theory and experiments. Tectonophysics, 340, 117–131.). The most important result of our work is that analytical models far overestimate the role of magnetic interaction in rock fabric quantification. Considering natural rocks as an assemblage of interacting and non-interacting grains, and that the effects of interaction are reduced by (i) the finite geometry of the interacting clusters, (ii) the relative orientation between interacting grains, (iii) their heterogeneity in orientation, shape and bulk susceptibility, and (iv) their inter-distance distribution, we reconcile analytical models and experiments with real case studies that minimize the role of magnetic interaction onto the measured AMS. Limitations of our results are discussed and guidelines are provided for the use of AMS in geological interpretation of igneous rock fabrics where magnetic interactions are likely to occur.     

华北克拉通南缘中条山-嵩山地区1.78Ga基性岩墙群的地球化学特征及构造环境

幔源岩浆侵位产生的基性岩墙群是地壳伸展裂解的重要标志。华北克拉通南缘中条山-嵩山地区出露有大量的中元古代基性岩墙群,对其研究将有助于深入了解华北克拉通中元古代构造演化特征。其岩石类型以辉绿岩为主,少量辉长辉绿岩和辉绿玢岩;主要造岩矿物为斜长石和单斜辉石,其它矿物包括角闪石、Fe-Ti氧化物、磷灰石、黑云母、碱性长石和石英。锆石SHRIMPU-Pb年龄为1785±18Ma,代表岩墙的结晶年龄。岩石K2O+Na2O含量为3.63%～6.18%,K2O/Na2O比值为0.73～1.38,FeOT含量较高(10.03%～13.59%),属于拉斑玄武岩系列。岩石的稀土元素含量高(142×10-6～381×10-6),亏损Nb、Ta、Zr、Hf等高场强元素,富集Rb、Ba、La等大离子亲石元素,全岩εNd(t)值为-6.2～-8.1。岩墙的固结指数(SI)和MgO含量呈明显的正相关关系,说明幔源岩浆发生过明显的结晶分异作用。地球化学分析表明,研究区基性岩墙属于板内拉斑玄武岩系列,与熊耳群火山岩有相似的地球化学特征;基于两者紧密的产出关系,我们认为该区岩墙可能是熊耳群火山岩的通道岩墙,共同代表了华北克拉通东、西陆块碰撞后伸展事件。     

Shape preferred orientation of object populations: automatic analysis of digitized images

An automatic technique is presented for systematic shape preferred orientation (SPO) analysis of crystal fabrics in rocks. This technique is based on digitization of an image with a CCD camera and separation of an object population from its matrix. The image is analysed globally using a rotating grid that is superimposed on the square pixel grid of the computer screen. The parametric method is based on counting intercepts in all directions. The interceps rose provides information on both the orientation and strength of the SPO. Problems of hardware-related counting noise anisotropy are avoided using an original method of filtering the intercept function with a linear, sliding mask on the counting grid. The technique was tested both on single objects of different shapes and on different populations of identical objects. A very high degree of accuracy was obtained for orientation measurements. Fabric shape parameters are introduced which are specific to this intercept technique; they compare favourably with shape parameters used in axial fabric analysis.     

Strain partitioning in a pluton during emplacement in transpressional regime: the example of the Néouvielle granite (Pyrenees)

This microstructural and anisotropy of magnetic susceptibility study of the internal structures of the Hercynian Néouvielle granite pluton (100 km²) provides new data indicating that the pluton was emplaced during the main Hercynian tectonic event recognized in the Pyrenees. It also provides new data about the later Alpine deformation localized along narrow mylonitic bands. These bands acted as reverse faults and have not rotated the Hercynian structures that define the main part of the pluton. The pluton is composed of two structural domains: the northern half of the pluton displays a beak shape in map view, with subhorizontal E-W trending lineations of magmatic origin; the southern half is semi-circular and displays rather steeply northward plunging lineations corresponding to magmatic and high temperature (HT) solid-state microstructures. These features are associated with magma deformation during emplacement. Magma deformation corresponds, in the northern half of the pluton, to an E-W strike-slip deformation recognized in the enveloping pelitic metasediments of Carboniferous age and, in the southern half of the pluton, to southward overthrusting recognized in the enveloping quartzites of Devonian age. Juxtaposition in a single granite body of transcurrent and compressive domains is viewed as a strain partitioning in the magma. This strain partitioning is linked to both the transpressive character of the main regional deformation event and the rheological contrast between the pelitic country rocks and quartzose country rocks.     

Determination of Total Organic Carbon Content and δ13C in Carbonate-Rich Detrital Sediments

The determination of total organic carbon content and composition in detrital sediments requires careful removal of their carbonate minerals. In detrital sediments containing large amounts of carbonates, including dolomite, this can only be achieved by liquid acid leaching that may solubilise a significant proportion of the organic carbon. For a set of detrital sediments from the Himalayan system and the Amazon River as well as five geological reference materials, we determined the proportion of organic carbon (C_org) solubilised during acid leaching. This proportion is significant for all analysed sediments and generally tends to increase with the organic carbon content. Compared to other types of sediments analysed, clay fractions extracted from river sediments and bed sediments with very low organic carbon content have high and low proportions of acid soluble C_org respectively. In Himalayan and Amazon river sediments, the proportion of C_org solubilised during acid leaching was relatively constant with average values of 14 and 19 % respectively. Thus, it is possible to correct the C_org content for the dissolved organic carbon content measured after decarbonation. Data presented here show that C_org dissolved during liquid acid leaching must be taken into account. After careful calibration, the method presented here should, therefore, be applied to any carbonate-rich detrital sediment.     

U–Pb dating of the end of the Pan-African orogeny in the Tuareg shield: the post-collisional syn-shear Tioueine pluton (Western Hoggar, Algeria)

The Tioueine pluton intrudes the Neoproterozoic series of the Iskel terrane, located in the Tuareg shield, western Hoggar. The consistency of the internal structures as well as the nature and organization of the associated microstructures demonstrate that the Tioueine pluton was emplaced syn-kinematically while N–S strike–slip shear zones were active. The syn-tectonic emplacement of the Tioueine massif implies that this pluton, although belatedly crystallized, entirely belongs to the concept of post-collisional magmatism. In order to date precisely the late Pan-African tectono-metamorphic event in the studied area, an U–Pb age of 523±1 Ma was obtained from abraded zircons of a late quartz–syenite from the Tioueine pluton. This early Cambrian age is younger than the other plutons of the Tuareg shield, which were mainly emplaced between 630 Ma and 580 Ma. This dating also shows that the Tuareg shield was not a single coherent block at 525 Ma, but rather an amalgam of active terranes moving each other along major shear zones. Finally, the Tioueine massif represents probably the final welding of the Tuareg shield assembly of terranes and consequently the end of the post-collisional orogenic episode in the whole Pan-African belt.     

Prediction of depth‐integrated fluxes of suspended sediment in the Amazon River: particle aggregation as a complicating factor

Large rivers have been previously shown to be vertically heterogeneous in terms of suspended particulate matter (SPM) concentration, as a result of sorting of suspended solids. Therefore, the spatial distribution of suspended sediments within the river section has to be known to assess the riverine sedimentary flux. Numerous studies have focused on the vertical distribution of SPM in a river channel from a theoretical or experimental perspective, but only a few were conducted so far on very large rivers. Moreover, a technique for the prediction of depth‐integrated suspended sediment fluxes in very large rivers based on sediment transport dynamics has not yet been proposed. We sampled river water along depth following several vertical profiles, at four locations on the Amazon River and its main tributaries and at two distinct water stages. Depending on the vertical profile, a one‐ to fivefold increase in SPM concentration is observed from river channel surface to bottom, which has a significant impact on the ‘depth‐averaged’ SPM concentration. For each cross section, a so‐called Rouse profile quantitatively accounts for the trend of SPM concentration increase with depth, and a representative Rouse number can be measured for each cross section. However, the prediction of this Rouse number would require the knowledge of the settling velocity of particles, which is dependent on the state of aggregation affecting particles within the river. We demonstrate that in the Amazon River, particle aggregation significantly influences the Rouse number and renders its determination impossible from grain‐size distribution data obtained in the lab. However, in each cross section, the Rouse profile obtained from the fit of the data can serve as a basis to model, at first order, the SPM concentration at any position in the river cross section. This approach, combined with acoustic Doppler current profiler (ADCP) water velocity transects, allows us to accurately estimate the depth‐integrated instantaneous sediment flux. Copyright © 2010 John Wiley & Sons, Ltd.     

Stable isotope analysis of consumer food webs indicates ecosystem recovery following prolonged drought in a subtropical estuarine lake

Assessing changes in food-web structure provides a useful monitoring tool for gauging the resilience of ecosystems in the face of climatic impacts. We consider the ecological resilience of a large estuarine lake (St Lucia Estuary, South Africa) in the wake of an extreme climatic event (prolonged drought). Using carbon and nitrogen stable isotopes, food-web structure was assessed at five sites across the estuary during the winter and spring of 2013. Sampling occurred approximately three years after heavy rains flooded the system and returned it to a relatively diluted state following an almost decade-long drought that decimated food webs in the upper parts of the estuary due to hypersalinity effects. Comparisons of niche width and variance of consumer food webs among sites revealed a general homogenisation of food webs across the entire system, contrasting with the spatial differentiation of food webs documented during the drought phase. Our results indicate that the estuary is able to maintain ecological resilience at the whole-system level in the face of an extreme drought. This is likely facilitated by source pools of species residing in the relatively stable lower estuary, which are able to rapidly recolonise areas denuded by drought in the upper estuary.     

Geological aspects of deformation in continental shear zones

A method of kinematic analysis of structures, microstructuresand mineral preferred orientations, initially devised in the study of peridotites, has been applied to crustal rocks bearing evidence of large strains produced in metamorphic environments. Three tectonic lineaments (Angers-Lanvaux, Montagne Noire and Maydan) were selected. They illustrate a general situation arising in continental crusts when they are deformed by ductile transcurrent fault systems.The Angers-Lanvaux structure is bilaterally symmetric; its dominant feature is the horizontal stretching lineation which is parallel to the fold axes. The foliation and slaty cleavage in the most surficial formations wrap around the axis of the whole structure. The folds in the slates away from the axis also exhibit axes parallel to the general trend, but no stretching lineations. These folds are attributed to crustal shortening in a direction normal to the ductile fault. In the Montagne Noire recumbent folds are thrusted away from the axis of the structure over at least 25 km. The metamorphism is also centered on the structure and symmetrically reduced away from it. The core of the structure is occupied by a strongly lineated orthogneiss, cut by a late intrusive granite. The Maydan axial zone displays clear evidence of partial melting at various scales within the deformed gneisses: (1) in gashes perpendicular to the stretching lineation which in these anatectic formations tends to plunge at more than 45°; (2) in bands of deformed pegmatites; and (3) possibly in granites which on the one hand intrude the surrounding formations and on the other converge with increasing deformation on the fault zone. The quartz preferred orientations and microstructures in quartzite layers from Angers indicate that the plastic flow plane and direction lie, respectively, close to the foliation and lineation, the slight departure is ascribed to a flow with a rotational shear component.All this suggests a general model for the origin of such ductile zones. The horizontal relative displacement of crustal blocks along a ductile band is responsible for its overall steeply dipping foliation and horizontal lineations. Viscous heating progressively tends to concentrate the plastic flow along its axis. It is also responsible for the development of metamorphism and of anatexis at depth; the partially melted rocks tend to rise, building at shallower depth the arched structure in the axis of the ductile zone, with a continuing flowage parallel to this axis probably now in the solid state; they can also intrude the surrounding terrain as undeformed batholiths. The folds parallel to the stretching lineation in the axial zone are explained by the fact that, due to the escape of anatectic melts, the formations at depth flow in a narrowing channel. The upwelling of the axial structure induces a compression with folding in the surrounding sedimentary formations and gravity nappe sliding away from the axis.