Identification of Permian palaeowind direction from wave-dominated lacustrine sediments (Lodève Basin, France)

Lacustrine environments are an excellent indicator of continental palaeoclimate. In particular, the sedimentary record of waves in lakes may be used to constrain atmospheric palaeocirculation. Wave ripples have been identified in a Permian lacustrine basin (the Salagou Formation, 260–250 Ma, Lodève Basin) located in the southern French Massif Central, part of the western European Hercynian mountain chain. Wave ripple patterns are interpreted with regards to hydrodynamics and water palaeodepth. It is shown that, in the case of the Salagou Formation, wave ripple orientations were controlled by the direction of the prevailing palaeowind. The Late Permian wind blew from between north and 20° east of north, possibly over several millions of years and certainly throughout the period of deposition of about 2000 m of strata in the Lodève Basin. Permian lacustrine sedimentation is widespread and well preserved on the Earth's surface and so wave ripple data may help constrain numerical modelling of the Earth's past climates, especially with regards to Permian times outside of desert regions.     

Geochemical characteristics of mineral air particles emitted inside a clay atomisation plant which introduces waste recycling processes

The objective of this work is to assess the concentrations of three factions of air particles (settable particles, TSP and PM10) and the levels of several toxic elements in a clay atomisation industry through aerosol sampling at several points inside an industrial plant. Mechanical activities, which produce diffuse emissions, are the main process of discharge of particles in both indoor and outdoor workplace environments in the atomisation plant. The levels of As, Cd, Pb, Zn, Ba and Ni increase in the zones with higher concentrations of particles and lower ventilation. The concentrations of As and F are not influenced by the recycling processes. The levels of Cd and Pb do not show great enrichment in air particles collected inside the atomisation plant although the content of both elements is associated with ceramic muck recycling. Finally, the content of B in waste water is mainly transferred in gaseous phase to the atmosphere during the process of drying by atomisation.     

Coagulation and transport of sediments in the Gironde Estuary

The distribution of suspended particle size and concentration were measured along the Gironde Estuary, France, from the river seaward to the ocean. The suspended particle size and volume concentration were measured using in situ holography and onboard optical techniques utilizing special procedures in order to avoid floc breakage. Sediments discharged by the rivers coagulate upon encountering the very low salinities (0.2‰ of the upper estuary (confirmed with laboratory experiments), and are then transported and deposited by currents in the remainder of the estuary. This coagulation, coupled with estuarine circulation, produces a turbidity maximum which is offset between the surface and bottom waters. The floc size maximum is oceanward of the turbidity maximum and is, likewise, offset along the estuary by about 30 km. The estuary can be subdivided into the following zones: (1) coagulation; (2) hydrodynamic, landward of the null point; and (3) hydrodynamic, seaward of the null point. Initial coagulation appears to be completed in coagulation zone (1), and particles are transported and settled (with very little floc breakage and recoagulation) in zones (2) and (3) only. The floc settling velocities, coupled with estuarine circulation, control the concentration and size distributions of flocs in the water column, and eventually control the deposition of sediments.     

Flow speed and calving rate of Kongsbreen glacier, Svalbard, using SPOT images

Kongsbreen, a tide-water glacier located in Kongsfjorden, is the most active calving glacier in Svalbard. Three SPOT images are used to determine its flow speed and calving rate. The position of fourteen reference points was determined on the coast or mountain sides, and the changes in position of 144 characteristic features on the glacier surface were calculated. The obtained speed profiles arc consistent with the findings from previous works from 1962-64 and 1983-86. When comparing the obtained longitudinal profile to the data from 1962–64. it is found that the flow velocity at a given distance from the front has been nearly constant.
The results from the SPOT images analysis are completed by using existing topographic works. The present study shows that SPOT images (panchromatic as well as multichannel), recorded with a periodicity of one year, can be used to determine precisely the annual flow speed and calving rate of active glaciers such as Kongsbreen. Images recorded with a periodicity of two, three or four weeks can allow identical determination on tide-water glaciers during a surging active phase.     

THE CLASSROOM AS THE FIELD FOR STUDYING GEOGRAPHICAL EDUCATION

ABSTRACT. Recent attempts by U.S. politicians to reform the nation'sschools have shifted the goal of education to school accountability as assessed in standardized testing. Such an emphasis undermines geographical education in schools because of geography'ssuperficial representation in tests and in the social studies curriculum. Fieldwork done in the classroom can point to means of circumventing this dilemma. Collaborative fieldwork between college faculty members and public‐school teachers has the potential for adding geography to the social studies curriculum in a substantive way. Work conducted jointly by Hartwick College and the Oneonta (New York) Middle School exemplifies such a partnership.     

NOUVELLE METHODE DE RESTITUTION D'UN HORIZON REFRAGTEUR PAR SISMIQUE REFRACTION*

The purpose of this report is to show a method of determining the top of a refractor departing from the times and slopes of the direct and inverse dromocrones. The method does not need topographical correction and can be applied without knowledge of the distance between the geophone and the shot point. These results having been obtained, the commonly accepted point of view is upset: instead of looking for two points on the surface corresponding to one point of the refractor, we try to etablish, starting with only one point from the surface, the two corresponding points from the top of the refractor. This method can be applied to isolated points and does not demand interpretative hypotheses of any kind, excluding the velocity evaluation of the overburden and of the refractor. The necessary calculations can be easily executed by means of a digital computer to which the dromocrone times and the distances between the geophones must be given. These calculations can also be executed by a person having no knowledge of refraction seismology. This report also examines the validity of the approximations involved in the method proposed.     

CARTOGRAPHIE DES “PSEUDO-RESISTIVITES APPARENTES’ PAR PROFILAGE TELLURIQUE-TELLURIQUE ASSOCIE A LA MAGNETO-TELLURIQUE *

The magneto-telluric and telluric-telluric profiling techniques are presented, and then a new method which combines these two techniques for mapping a parameter defined as the “apparent pseudo-resistivity”. The results obtained for the uranium structures in the Cluff Lake district (Saskatchewan Canada) indicate the use of these different techniques in the detection of zones of conduction for surface zones and for deeper zones, and demonstrate the advantages of these methods over the usual electrical methods in problems of structural research.     

Diagenetic formation of gypsum and dolomite in a cold‐water coral mound in the Porcupine Seabight,off Ireland

Authigenic gypsum was found in a gravity core, retrieved from the top of Mound Perseverance, a giant cold‐water coral mound in the Porcupine Basin, off Ireland. The occurrence of gypsum in such an environment is intriguing, because gypsum, a classic evaporitic mineral, is undersaturated with respect to sea water. Sedimentological, petrographic and isotopic evidence point to diagenetic formation of the gypsum, tied to oxidation of sedimentary sulphide minerals (i.e. pyrite). This oxidation is attributed to a phase of increased bottom currents which caused erosion and enhanced inflow of oxidizing fluids into the mound sediments. The oxidation of pyrite produced acidity, causing carbonate dissolution and subsequently leading to pore‐water oversaturation with respect to gypsum and dolomite. Calculations based on the isotopic compositions of gypsum and pyrite reveal that between 21·6% and 28·6% of the sulphate incorporated into the gypsum derived from pyrite oxidation. The dissolution of carbonate increased the porosity in the affected sediment layer but promoted lithification of the sediments at the sediment‐water interface. Thus, authigenic gypsum can serve as a signature for diagenetic oxidation events in carbonate‐rich sediments. These observations demonstrate that fluid flow, steered by environmental factors, has an important effect on the diagenesis of coral mounds.     

Late Ordovician climbing‐dune cross‐stratification: a signature of outburst floods in proglacial outwash environments?

Climbing dune‐scale cross‐statification is described from Late Ordovician paraglacial successions of the Murzuq Basin (SW Libya). This depositional facies is comprised of medium‐grained to coarse‐grained sandstones that typically involve 0·3 to 1 m high, 3 to 5 m in wavelength, asymmetrical laminations. Most often stoss‐depositional structures have been generated, with preservation of the topographies of formative bedforms. Climbing‐dune cross‐stratification related to the migration of lower‐flow regime dune trains is thus identified. Related architecture and facies sequences are described from two case studies: (i) erosion‐based sandstone sheets; and (ii) a deeply incised channel. The former characterized the distal outwash plain and the fluvial/subaqueous transition of related deltaic wedges, while the latter formed in an ice‐proximal segment of the outwash plain. In erosion‐based sand sheets, climbing‐dune cross‐stratification results from unconfined mouth‐bar deposition related to expanding, sediment‐laden flows entering a water body. Within incised channels, climbing‐dune cross‐stratification formed over eddy‐related side bars reflecting deposition under recirculating flow conditions generated at channel bends. Associated facies sequences record glacier outburst floods that occurred during early stages of deglaciation and were temporally and spatially linked with subglacial drainage events involving tunnel valleys. The primary control on the formation of climbing‐dune cross‐stratification is a combination between high‐magnitude flows and sediment supply limitations, which lead to the generation of sediment‐charged stream flows characterized by a significant, relatively coarse‐grained, sand‐sized suspension‐load concentration, with a virtual absence of very coarse to gravelly bedload. The high rate of coarse‐grained sand fallout in sediment‐laden flows following flow expansion throughout mouth bars or in eddy‐related side bars resulted in high rates of transfer of sands from suspension to the bed, net deposition on bedform stoss‐sides and generation of widespread climbing‐dune cross‐stratification. The later structure has no equivalent in the glacial record, either in the ancient or in the Quaternary literature, but analogues are recognized in some flood‐dominated depositional systems of foreland basins.