Experimental tests for the assessment of the shear strength of marble waste dumps

The large dumps of waste material called ravaneti from marble quarrying activities in Alpi Apuane basin are distinguished features of the local landscape. They are strongly heterogeneous, never compacted and frequently subject to local instabilities. The access roads to the marble quarries cross the dumps; therefore, it is concern of the local authorities to hinder such phenomena. In this respect it is of paramount importance to evaluate the shear strength of the material comprising the dumps at the proper scale. In this note, the results of in-situ direct shear and tilt tests on samples of metric size are illustrated, together with the interpretation according to a strength criterion relative to rockfills. The results of a series of lab tests on the finer fraction of the waste material are also described and interpreted. Finally, qualitative considerations on the local and global stability of the waste dumps, related to their shear strength, are reported.     

Analysis of Fracture Mechanics Tests on Opalinus Clay

Many studies have recently been conducted to evaluate various mechanical characteristics of the Opalinus Clay (OPA) formation in view of its potential use as the hosting rock for the Swiss nuclear waste repositories. Its sedimentary bedding makes OPA a transversely isotropic rock and its directional mechanical properties need to be measured. This paper reports on an experimental and computational approach that was adopted to define the parallel-to-bedding fracture mechanics (FM) parameters of OPA in Mode-I. OPA cores from Mont Terri Underground Research Laboratory (URL) were submitted to laboratory tests on notched semi-circular specimens under three-point bending (SCB). In these tests, crack propagation is forced along the notch direction. However, the 45° bedding inclination of the specimen axis frequently deviated the crack from the expected direction. An analysis of the SCB tests was performed by means of non-linear FM techniques and the pertinent Mode-I parameters along the bedding were estimated.     

Experimental and analytical studies of the parameters influencing the action of TBM disc tools in tunnelling

The use of tunnel boring machines (TBMs) is increasingly popular in tunnelling. One of the most important aspects in the use of these machines is to assess with certain accuracy the effectiveness of the action of the discs on the cutter-head in the different rock types to be excavated. A specific machine, called an intermediate linear cutting machine (ILCM), has been developed at the Politecnico di Torino in order to study, on a reduced scale in detail in the laboratory, the interaction between the discs of the TBM and the rock: this machine allows a series of grooves to be cut on a rock sample of 0.5 × 0.3 × 0.2 m, through the rolling of a 6.5-in. disc, and evaluation, during testing, of the parameters associated with the action of the cutting tool. The parameters measured during the tests were compared with the results obtained employing two analytical methods widely used for predicting the performance of TBMs: the Colorado School of Mines (CSM) model and the Norwegian University of Science and Technology (NTNU) model. The latter showed a greater ability to reproduce tests conducted using the ILCM. However, as with the CSM model, it does not allow the optimal excavation condition (the ratio, which minimizes the specific energy of excavation, between the groove spacing and the penetration of the disc), necessary for the correct design of the TBM cutter-head, to be identified. An example, based on a real case of a tunnel in Northern Italy, allowed a demonstration of how the NTNU model provides results in line with the measurements taken during the excavation and represents, therefore, a model that is able to reliably simulate both laboratory tests and the action of a TBM on site. The NTNU model, together with the results of the tests with ILCM targeted on the identification of the optimal conditions of excavation, may allow the correct dimensioning of the TBM cutter-head to be attained in order to effectively implement the excavation.     

Theoretical and Experimental Results from Laboratory Tests by ILCM

The intermediate linear cutting machine (ILCM) is a machine designed to work on an intermediate scale between the full- and the small-scale. The reduced scale involves several advantages compared to full-scale tests, especially in terms of sample supplying and transportation. On the other hand, it has an impact on the testing conditions, resulting in a limitation of the cutting penetration and spacing during the test, as well as in a smaller disc cutter. This affects most of the results, which cannot be directly used for the on-site machine performance prediction. However, some experimental results provided in the literature show that the optimal spacing/penetration ratio is not significantly affected by the changes involved. On this basis, the results obtained from ILCM tests should provide reliable information about the optimal cutting conditions of a tunnel boring machine in massive rock mass. The work performed included the development of some improvements of the testing rig, as well as a modified ILCM testing procedure, according to the one typically used in standard LCM tests. The results provide information about the attitude of the tested lithotypes to mechanical excavation by means of disc tools, including the optimal cutting conditions. Additional work was developed in terms of detailed characterisation of the rock samples involved and assessment of the size distribution of the debris produced during the ILCM tests. Nevertheless, further tests are necessary, in order to assess the consistency of the experimental procedure employed and to investigate the scale effect.