基于GPIB接口的计数器数据采集与控制软件

在Windows平台上 ,使用VC 6 .0开发了一套基于GPIB接口的计数器数据采集与控制软件 ,其特点是采用了多线程机制 ,可实现对计数器的控制 ,以及数据的采集与实时显示。     

A standard format for reporting PILPS experiments

In model inter-comparisons one major obstacle is the format of the reported data. To facilitate the analysis of the results from the different models they should all be reported in the same format. This requires that the format is flexible enough to be easily implemented into the different land surface schemes. It should also be fault tolerant and allow a few consistence checks to avoid erroneous data to be submitted. The present note describes such a format developed for the PILPS project. After discussing the aim of this new format we present the routines which are used to write and read data. Finally two applications are described which allow the user to perform a number of consistency checks on the data.     

Geochemical survey of thermal system in Northeast China and their geothermometric characters

The chemical composition of several thermal springs around Changbaishan area has been investigated. Cenozoic basaltic rocks are widely distributed in Northeast China and geothermal characteristics have been described. About one hundred hot springs exist around Changhaishan Volcano at the border between China and D.P.R.Korea with high temperature about 82~C. The pH values of the spring water range from 6.9 to 7.1 and the total flow rate is about 4.8 L/sec. The chemical composition of the thermal springs is sodium carbonate; the high-mineral contents of thermal water are believed to have medicinal properties. Bathhouses are already built along the hot springs to take the advantage of the supposed healing properties. The high quality of those hot springs is believed to be utilitized for mineral water. The chemical equilibrium temperatures were estimated at about 160℃ based on the Na-K-Ca geochemical thermometer.     

一种基于特征信息的车牌识别方法

根据中国车辆牌照本身的现有特征信息,提出一种车牌识别方法.采用全局动态阈值法进行二值化处理图像,牌照定位算法简单迅速,字符分割参考垂直投影间隔和字符的纵横比.实验结果表明,这种方法具有良好的环境适应性和鲁棒性.     

Modelling of deformation response and chemo‐mechanical coupling in chalk

A constitutive relation is derived for describing the mechanical response of chalk. The approach is based on a phenomenological framework which employs chemo‐plasticity. The properties of the material are assumed to be affected by the physico‐chemical processes that occur through the interaction between the skeleton and the pore fluid. The underlying mechanism is discussed by invoking a micromechanical analysis. The performance of the framework is illustrated by examining the evolution of mechanical characteristics in the presence of different pore fluids. Copyright © 2006 John Wiley & Sons, Ltd.     

测定天琴RR变星金属丰度的方法

银晕中天琴RR变星金属丰度的测定对于研究银河系晕的形成和演化具有重要的意义．在当前的技术条件下,高分辨光谱的方法难以测量银晕中较暗的天琴RR变星的金属丰度．高分辨光谱测定金属丰度的方法对恒星大气模型的依赖性较高,而恒星脉动引起的复杂大气状况对于建立正确的大气模型本身就是挑战．△S光谱方法、Caby测光方法和光变曲线的参数方法则弥补了高分辨光谱方法的不足,将能测量更远距离上的天琴RR变星的金属丰度．着重介绍了这3种方法发展的历史、具体的观测流程以及需要注意的问题。通过比较这3种方法的优劣,为实际观测时方法的选用提供借鉴。     

CPLD技术及其在现代时统中的应用

对CPLD(复杂可编程逻辑器件)技术的基本特征和发展趋势作了简要介绍,揭示了该技术在现代数字系统中的重要地位及作用.利用CPLD对时统设备IRIG-B码产生器进行集成,其实验结果表明,集成了的B码产生器不但简单、可靠,而且便于调试,克服了以往硬件电路复杂的缺点.     

应用GPS观测青藏高原东北缘应力场变化

采用各向同性弹性地球模型推导了地面位移场速率与地壳内任意点应力场变化的边界积分关系,同时利用青藏高原东北缘1999～2001年观测的GPS资料对观测区地壳深度为5 km和25 km的主应力和最大剪应力进行了计算分析.结果表明,青藏高原东北缘的主应力变化主要集中在祁连山断裂、海原断裂等,在1920～1954年间历史上发生过多次震级为7.0～8.5级强震的断裂附近,并具有主应力变化沿断层走向分布、最大剪应力沿断层走向交替变化等特征.     

成团天体系统成员概率计算的有效性问题

本文提出了一个普适的衡量成团天体系统成员概率计算结果的有效性指数：Ｅ＝１－ＮΣ｛Ｐ（ｉ）［１－Ｐ（ｉ）］｝／ΣＰ（ｉ）Σ［１－Ｐ（ｉ）］｝，并以此对以Ｓａｎｄｅｒｓ方法为基础的各种成员确定模型的有效性进行了分析．从总体上说，运动学资料（自行、视向速度等）是一类有效的观测判据．     

三峡重庆库区深部地球物理特征与断裂构造

为了深入研究三峡重庆库区岩石圈动力学特征及其对断裂构造活动的控制和影响．并为之提供基础资料，为三峡重庆库区地震、地质灾害的监测与防治提供基础依据，在已有地球物理资料的基础上，从综合地球物理研究角度出发，通过实测地震测线资料的再解释．采用新的处理技术方法，对本区的东西向主剖面和南北向支测线的地震测深资料进行二维射线追踪处理、Pg波成像；选用场分离技术、位移数字成像技术重新处理了重力和航磁资料，通过联合反演来建立深部二维构造剖面，对剖面所揭示的基底构造特征和地壳结构特征、主要断裂构造特征以及莫霍面的起伏特征进行了精细分析和细致研究．从地球物理平面场特征出发建立了岩石圈构造三维框架。研究结果表明，这样的研究思路准确、方法得当．结论可靠；沿该剖面，把可解译的断裂分为Ⅲ级：Ⅰ级为超岩石圈断裂；Ⅱ级为壳断裂；Ⅲ级为盖层断裂。依据地球物理特征，准确揭示了库区的断裂构造特征，达到了预期效果。