An Early Cretaceous slab window beneath central Tibet,SW China: Evidence from OIB‐like alkaline gabbros in the Duolong area

The geodynamic mechanism of the late Early Cretaceous magmatic flare‐up in the collisional zone between the Lhasa and Qiangtang terranes in Tibet is controversial because of a scarcity of robust evidence. To address this problem, we report geochronological, geochemical and Hf isotopic data for the newly discovered Gufeng gabbros from the Duolong Cu–Au mineral district of the western Bangong–Nujiang Suture Zone (BNSZ). The gabbro samples, dated at 126.3 ± 1.8 Ma, show geochemical similarities to typical ocean island basalt (OIB) and have positive εHf(t) values of +3.3 to +6.9. The gabbros were generated by decompression melting of deep upwelling asthenosphere. This event is best explained by slab break‐off and the resultant development of a slab window beneath central Tibet.     

Directional interpolation infinite element for dynamic problems in saturated porous media

In this study, a directional interpolation infinite element suited to a saturated porous medium is presented to account for dynamic problems with semi-infi     

A multiscale work-analysis approach for geotechnical structures

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.     

邻菲啰啉在测定亚铁中的保护效果

样品在分解过程中 ,亚铁易被空气部分氧化 ,致使测试结果偏低 ,采用在HF H2 SO4溶矿过程中加入邻菲卟罗啉 ,与亚铁形成络合物 ,对保护亚铁具有较好的效果。拟定了在塑料坩埚中加邻菲卟罗啉、H2 SO4及HF ,中高温电热板溶矿 ,容量法测定样品中的亚铁 ,方法精密度为 0 .2 3% ,样品加标准回收率 98.8%～ 10 1.9%。此方法具有较好的应用效果     

描述地壳垂直运动过程的一种函数形式

本文在已有数据处理方法的基础上，利用近代数值逼近理论，给出了从时空域角度描述地壳垂直运动过程的一种具体的函数解析形式。最后给出了一个实际算例。     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

测绘项目管理实施引论

根据我国测绘生产单位的实际情况 ,测绘项目管理的具体实施大致包括对项目的识别、选定、启动与筹集资金、计划、成本估算、执行计划、控制、收尾等主要步骤。当项目确定后 ,需要启动和筹集资金。而计划是项目管理的基本组成部分 ,包括明确项目目标和工作范围。项目成本估算有因素估算法和利用WBS方法的详细估算。项目质量管理规划的依据有质量目标、范围说明、标准和规范等。     

长江三峡工程地壳形变监测网络

长江三峡工程地壳形变监测网络，采用了当今高精度GPS、INSAR空间大地测量技术，并与精密水准测量，精密重力测量，精密激光测距和峒体连续形变监测等技术相结合，构成一个空间上点、线、面结合，时间上长、中、短兼顾的高精度，高时空分辨率的地壳形变监测网络。该网络既可获取三峡库区特别是库首区区域形变场和区域应变场的动态变化，监测库区主要断层活动，为水库诱发地震预测及研究服务，又可用于气象、滑坡地质灾害监测等，该监测网络于1997年底开始建设，2001年6月建成，到目前为止，已获得大量宝贵的观测资料，必将产生显著的经济效益和社会效益。     

渤海湾盆地新生界生油岩系底界面温度分布

依据渤海湾盆地2000余口测温井的地温梯度数据、地层岩性描述、分层数据以及钻井资料,计算了该盆地各生油岩系底界面的温度。统计结果表明:渤海湾盆地沙河街组大部分凹陷区地层底界面温度介于90℃至150℃,目前仍具有大量生油的温度条件,而在隆起或一些凸起地区,该地层组段温度普遍小于90℃,未能达到生油的温度指标。东营组和孔店组地层也仍具有一定的生油温度条件。研究还表明:地层温度与地层界面埋深密切相关,温度随界面埋深的增大而升高,沉积厚度大的凹陷区地层界面温度大于沉积厚度小的凸起区或斜坡地带,说明地层界面埋深是决定地温高低的主要控制因素,而地温梯度对地层界面温度的影响相对较小。     

阜新—朝阳高速公路段黄土三轴剪切特性研究

对取自阜新—朝阳高速公路段的黄土进行了14C测年、颗粒分析、湿陷及常规试验等,对比分析了其基本特性,通过三轴剪切试验,获得了不同含水量的黄土剪切孔压、固结孔压、抗剪强度及剪切变形的变化特征。分析认为,辽西黄土此类特性由黄土的物质成分和结构特征所决定。对不同含水量的黄土剪切变形曲线建立力学模型,拟合结果表明,对于脆性破坏的应变软化曲线,刘祖典模型描述的效果并不理想,而文中建议的经验模型则较为适合。