Time-dependent photoionization opacities in dense gamma-ray burst environments

The recent detection of a transient absorption feature in the X-ray prompt emission of GRB 990705 showed the importance of such observations in the understanding of gamma-ray bursts and their progenitors. We investigate the time dependence of photoionization edges during the prompt emission of bursts in different environments. We show that their variability can be used to infer the density and geometry of the surrounding medium, giving important clues to unveil the nature of the burst progenitor.     

Iron oxidation state in the Fe‐rich layer and silica matrix of Libyan Desert Glass: A high‐resolution XANES study

Abstract— Libyan Desert Glass (LDG) is an enigmatic type of glass that occurs in western Egypt in the Libyan Desert. Fairly convincing evidence exists to show that it formed by impact, although the source crater is currently unknown. Some rare samples present dark‐colored streaks with variable amounts of Fe, and they are supposed to contain a meteoritic component. We have studied the iron local environment in an LDG sample by means of Fe K‐edge highresolution X‐ray absorption near edge structure (XANES) spectroscopy to obtain quantitative data on the Fe oxidation state and coordination number in both the Fe‐poor matrix and Fe‐rich layers. The pre‐edge peak of the high‐resolution XANES spectra of the sample studied displays small but reproducible variations between Fe‐poor matrix and Fe‐rich layers, which is indicative of significant changes in the Fe oxidation state and coordination number. Comparison with previously obtained data for a very low‐Fe sample shows that, while iron is virtually all trivalent and in tetrahedral coordination (^[4]Fe³⁺) in the low‐Fe sample, the sample containing the Fe‐rich layers display a mixture of tetra‐coordinated trivalent iron (^[4]Fe³⁺) and penta‐coordinated divalent iron (^[5]Fe²⁺), with the Fe in the Fe‐rich layer being more reduced than the matrix. From these data, we conclude the following: a) the significant differences in the Fe oxidation state between LDG and tektites, together with the wide intra‐sample variations in the Fe‐oxidation state, confirm that LDG is an impact glass and not a tektite‐like glass; b) the higher Fe content, coupled with the more reduced state of the Fe, in the Fe‐rich layers suggests that some or most of the Fe in these layers may be directly derived from the meteoritic projectile and that it is not of terrestrial origin.     

Pleistocene mass-flow deposits of basaltic hyaloclastite on a shallow submarine shelf,South Iceland

A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km³ of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.     

The Agulhas Ridge, South Atlantic: The Peculiar Structure of a Fracture Zone

The Agulhas Ridge is a prominent topographic feature that parallels the Agulhas-Falkland Fracture Zone (AFFZ). Seismic reflection and wide angle/refraction data have led to the classification of this feature as a transverse ridge. Changes in spreading rate and direction associated with ridge jumps, combined with asymmetric spreading within the Agulhas Basin, modified the stress field across the fracture zone. Moreover, passing the Agulhas Ridge’s location between 80 and 69 Ma, the Bouvet and Shona Hotspots may have supplied excess material to this part of the AFFZ thus altering the ridge’s structure. The low crustal velocities and overthickened crust of the northern Agulhas Ridge segment indicate a possible continental affinity that suggests it may be formed by a small continental sliver, which was severed off the Maurice Ewing Bank during the opening of the South Atlantic. In early Oligocene times the Agulhas Ridge was tectono-magmatically reactivated, as documented by the presence of basement highs disturbing and disrupting the sedimentary column in the Cape Basin. We consider the Discovery Hotspot, which distributes plume material southwards across the AAFZ, as a source for the magmatic material.     

Tying seismic data to geologic information from core data: an example from ODP Leg 177

The integration of seismic data with core data should provide ground-truth to a structural interpretation of seismic data. The main difficulty in such an integration effort is the correct translation of physical property measurements on cores to a form which can be used in seismostratigraphic interpretation. In the absence of down-hole well data and check-shots, required knowledge of the velocity structure at the drilling locations can be obtained directly from measurements of the physical properties of core samples. This involves upscaling of the data from physical properties of cores to the sample interval used in the seismic data. In the present study, three of the seven drill-sites of ODP (Ocean Drilling Program) Leg 177 in 1997/1998, located on the Agulhas Ridge in the south-eastern Atlantic (sites 1088–1090), were connected with eight seismic profiles. Physical properties data measured on the cores from the various holes at each site were combined to create a single continuous log and used to construct synthetic seismograms. The synthetics generally show a good agreement with real seismic data in terms of amplitude and waveform. Some reflections in these generated traces may have a time-shift due to sections with incomplete or spurious P-wave velocity measurements in the ODP datasets. The main reflectors identified in the real seismic data correspond to hiatuses or periods of reduced sedimentation rates, and correlate well with density variations. One particular hiatus, clearly observable in the real seismic data, was not unequivocally identifiable in the various types of core data, and tying core data to seismic data can confirm its existence in the core data, showing the benefit of including seismic data in an interpretation of core log data. On the other hand, core data provide a calibration tool for the geological timescale of seismic data and information about the lithology, needed in the interpretation of seismic data.     

A seismic reconnaissance survey of the northern Congo Fan

To study the time-varying influence of the Congo River and the Benguela Current on the deposition at the Angola Continental Margin, a high-resolution reflection seismic survey was carried out on the northern Congo Fan. Four seismostratigraphic units have been defined for the upper 800 m (1000 ms TWT) of the data. The units record different depositional environments, ranging from pre-establishment of the Congo River drainage system to the influence of the Benguela Current. An indication of a general change in the turbidite system is provided by a shift in channel distribution and a relocation of the depocentre of coarse material. The ascent of salt is recorded up to the Pliocene. Gas that has migrated out of Lower Cretaceous shales and that was produced from large quantities of organic matter in the younger sediments can be found on the flanks and on top of the salt domes. In a few places, this gas even ascends to the ocean floor along structural pathways through the topmost unit.     

Biomarkers of Exposure and Effects for Assessing Toxicological Risk of Endocrine Disrupters in Top Predators of the Mediterranean Sea

Abstract. Endocrine Disrupting Chemicals (EDCs) have the potential to alter hormone pathways that regulate reproductive processes in wildlife and fisheries. In this research the unexplored hypothesis that Mediterranean top predator species (such as large pelagic fish and marine mammals) are potentially at risk due to EDCs is investigated. In the Mediterranean environment, top predators accumulate high concentrations of polyhalogenated aromatic hydrocarbons (PHAHs) and toxic metals, incurring high toxicological risk. Here we illustrate the need to develop sensitive biomarkers for evaluation of toxicological risk in top marine predators (Xiphias gladius, Thunnus thynnus thynnus) and non-lethal techniques, such as non-destructive biomarkers, for the hazard assessment of threatened species exposed to EDCs, such as marine mammals ( Stenella coeruleoalba, Tursiops truncatus, Delphinus delphis and Balaenoptera physalus ).     

The polarization of X-ray emission of some solar flares in July 1974

Preliminary results of polarization measurements at three solar flares of July 5 and 6, 1974, are given. The measurements were performed at h 15 keV with Thomson-scattering polarimeter on the Intercosmos 11 satellite.At the decay phase of the flare on July 5 we obtained P = 3.4–5.0%, which did not exclude some contribution from non-thermal processes. At the flares of July 6 we found P =1.0–1.9% and P = 0.1–2.0%, respectively: neither value exceeds the level of statistical fluctuations.Presented at XVIII COSPAR Meeting (VARNA, May–June 1975), contribution III.B.2.9.     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

Maximum Storm Surge Curve Due to Global Warming for the European North Sea Region During the 20th–21st Century

Computations of storm surges during the 20th century needs to incorporate globalwarming of about 0.6 °C ± 0.2 °C (IPCC, 2001). In order totake this global warming into consideration, the development of all storm surgesoccurred during the 20th century have been analysed. The study comprises determiningto what degree the storm surge curve and storm surge level depend on each other. Thisfact can be used to calculate a maximum storm surge curve and each single storm surgeevent can be summarised. The tendency of the surge and wind parameters do not showthat this maximum storm surge levels in the 20th century will occur earlier than predicted, however, the global warming of 0.6 °C will extend the duration of the mean storm surge curve.