Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Multistep matched-field inversion for broad-band data from ASIAEX2001

This paper discusses the results of geoacoustic inversion carried out using explosive charge data from the Asian Seas International Acoustic Experiment (ASIAEX) East China Sea (ECS) Experiment. A multifrequency incoherent matched-field inversion processor and a genetic algorithm (GA) are used for the inversion. A multistep matched field inversion approach is presented, which makes use of the varying sensitivities of wave fields at various frequencies to reduce the inversion problem into a sequence of smaller inversions with fewer unknowns to estimate at each stage. Different parameters are estimated using data at different frequencies according to their sensitivities. Inversion results for different areas in the ECS region are summarized and compared with core data.     

用PCI中断实现射电望远镜跟踪的方法

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。     

基于WS-Security的安全动态电子商务

Web服务方式的动态电子商务是电子商务的最终目标，安全问题是制约动态电子商务实现的主要因素。在介绍了WS-Security规范后，给出了一个建立动态电子商务的案例，分析了这个过程中可能面临的安全风险，提出了一种如何实现电子商务中重要的机密性、完整性问题的方法。     

单片机在卫星天线控制系统中的应用

主要介绍卫星天线控制系统中天线旋转定位控制的软硬件设计和实现。该部分的主要功能是：接收红外遥控器的信号；检测前面板上的按键信号；检测传感器反馈的信号；根据所得信号作出相应的动作。     

桩静载荷试验快速法与慢速法对比研究

通过对54根管桩静载荷试验快速法与慢速法对比试验研究,找出了在各级荷载作用下,快速法与慢速法沉降差异规律及快速法与慢速法分别得出的极限承载力差异规律;得出了将快速法静载试验下的沉降及单桩极限承载力修正成慢速法静载试验的沉降及单桩极限承载力的公式;提出了适应天津地区管桩的快速法静载试验方法。     

饱和粉砂不稳定性的试验研究

通过对净砂和级配良好粉砂(含10 %粉土)进行一系列三轴固结不排水试验（CU）,研究了粉土、孔隙比和围压对饱和粉砂不稳定性的影响。试验结果表明,净砂与粉砂在不排水剪切条件下均会出现应变软化现象（即不稳定性）。同一围压下脆性指数(IB)随孔隙比增加,但不稳定线的应力比随孔隙比增加而减小。引用等效粒间孔隙比(ege)后,净砂和粉砂在ege-ln p?平面上拥有基本相同的临界状态线。在临界状态理论及等效粒间孔隙比的基础上,提出在同一修正状态参数(?ge)下净砂和级配良好粉砂有相似的不稳定性。     

Characterization of bacterial community structure in vestimentiferan tubeworm Ridgeia piscesae trophosomes

Terminal‐restriction fragment length polymorphisms (T‐RFLPs) were used to address the question whether there are multiple phylotypes of bacteria within the trophosome of the vestimentiferan tubeworm Ridgeia piscesae in addition to the known endosymbiont. Clone libraries were constructed to aid in the identification of the additional bacterial phylotypes. Individual R. piscesae specimens were collected from Juan de Fuca Ridge, Axial Caldera and Explorer Ridge, Magic Mountain. Clone library analyses revealed only one bacterial phylotype (expected R. piscesae endosymbiont) within the Explorer Ridge trophosomes. However, the Axial Caldera clone library revealed five operational taxonomic units (OTUs). Three of the resulting phylotypes detected (designated RAE) were putative thioautotrophic symbionts within the γ‐Proteobacteria which belonged to the anticipated endosymbiont group (RAE OTU 1), the Maorithyas hadalis symbiont II group (RAE OTU 3), and the Halothiobacillus group (RAE OTU 4). The remaining two phylotypes were most likely opportunistically derived. RAE OTU 5 was an α‐Proteobacterium within the Roseobacter group and RAE OTU 2 was within the Cytophaga–Flavobacterium–Bacteroidetes. T‐RFLP analyses revealed that all 15 trophosomes evaluated contained at least RAE OTUs 1 and 4. Five of the 15 trophosomes contained at least RAE OTUs 1, 3, and 4 and two of the trophosomes contained at least five RAE OTUs. Cluster analysis of the T‐RFLP data revealed three distinct clusters. The number of taxa within the trophosome may be an indication of the general health of the tubeworm. This study strongly suggests that we have discovered and identified more than one bacterial phylotype within the trophosome of vestimentiferan R. piscesae.     

海沧邻近海域表层沉积物中重矿物研究

对厦门海沧邻近海域表层沉积物中的重矿物(0．063～0．125mm粒级)进行了分析和研究，结果表明该粒级的重矿物共计49种，其优势和特征矿物为磁铁矿、赤铁矿、褐铁矿、绿帘石、铁铁矿、角闪石、锆石、红柱石等；重矿物的平均质量分数为9．56％；根据重矿物的分布和含量，并结合主要标志矿物的颗粒百分含量和分布特征，将该海域划分为5个矿物组合区，根据各区的矿物组合类型分析了该海域的物质来源及影响重矿物分布和组合的因素，进而探讨了九龙江河口湾和厦门西港海湾的沉积环境。     

潮汐沉积率与沉积间断

在浙北奥陶系文昌组和长江三角洲开敞型淤泥质海岸非潮道潮汐纹层研究的基础上,得出与国外同类研究相近的沉积率。现代海岸进积速度和潮坪沉积的观察及测试证明,上述沉积率是难以置信的。现代潮坪观测表明,潮汐纹层在形成过程中即包含着改造,所保留的纹层占应形成数的不到１０％,其余９０％以上被侵蚀。小型层序是风暴和平静天气的产物,为风暴层序,与大小潮周期无关。其地层中保留的数量不到应生成数的１０％,其余９０％被改造。小型层序被侵蚀,其中的纹层随之消失。致使潮坪层序中保存的纹层数仅为应形成数的０．２％。被改造的纹层和单层留下的仅是侵蚀面,即小间断。在进行潮汐沉积高分辨率的研究时应充分重视沉积间断的作用