Geomagnetic Effects of Corotating Interaction Regions

We present an analysis of the geoeffectiveness of corotating interaction regions (CIRs), employing the data recorded from 25 January to 5 May 2005 and throughout 2008. These two intervals in the declining phase of Solar Cycle 23 are characterised by a particularly low number of interplanetary coronal mass ejections (ICMEs). We study in detail how four geomagnetic-activity parameters (the Dst, Ap, and AE indices, as well as the Dst time derivative, \(\mathrm{dDst}/\mathrm{d}t\)) are related to three CIR-related solar wind parameters (flow speed, \(V\), magnetic field, \(B\), and the convective electric field based on the southward Geocentric solar magnetospheric (GSM) magnetic field component, \(\mathit{VB}_{s}\)) on a three-hour time resolution. In addition, we quantify statistical relationships between the mentioned geomagnetic indices. It is found that Dst is correlated best to \(V\), with a correlation coefficient of \(\mathrm{cc}\approx0.6\), whereas there is no correlation between \(\mathrm{dDst}/\mathrm{d}t\) and \(V\). The Ap and AE indices attain peaks about half a day before the maximum of \(V\), with correlation coefficients ranging from \(\mathrm{cc}\approx0.6\) to \(\mathrm{cc}\approx0.7\), depending on the sample used. The best correlations of Ap and AE are found with \(\mathit{VB}_{s}\) with a delay of 3 h, being characterised by \(\mathrm{cc}\gtrsim 0.6\). The Dst derivative \(\mathrm{dDst}/\mathrm{d}t\) is also correlated with \(\mathit{VB}_{s}\), but the correlation is significantly weaker \(\mathrm{cc}\approx 0.4\)?–?0.5, with a delay of 0?–?3 h, depending on the employed sample. Such low values of correlation coefficients indicate that there are other significant effects that influence the relationship between the considered parameters. The correlation of all studied geomagnetic parameters with \(B\) are characterised by considerably lower correlation coefficients, ranging from \(\mathrm{cc}=0.3\) in the case of \(\mathrm{dDst}/\mathrm{d}t\) up to \(\mathrm{cc}=0.56\) in the case of Ap. It is also shown that peak values of geomagnetic indices depend on the duration of the CIR-related structures. The Dst is closely correlated with Ap and AE (\(\mathrm{cc}=0.7\)), Dst being delayed for about 3 h. On the other hand, \(\mathrm{dDst}/\mathrm{d}t\) peaks simultaneously with Ap and AE, with correlation coefficients of 0.48 and 0.56, respectively. The highest correlation (\(\mathrm{cc}=0.81\)) is found for the relationship between Ap and AE.     

Discussion of: Ortega-Flores et al. (2018) Provenance analysis of Oligocene sandstone from the Cerro Pelón area,southern Gulf of Mexico.https://doi.org/10.1080/00206814.2018.1476922

ABSTRACT

We discuss the 2018 publication that reports petrographic, heavy mineral data, mineral chemistry, and zircon geochronology for Oligocene sandstones in the Cerro Pelón area in southern Mexico Sureste basin. As the title of their paper says, the goal of their study is to establish the source (s) of the voluminous Cenozoic section in this region, reaching several kilometres in thickness and important as a petroleum system. These authors conclude that Oligocene sandstones of La Laja Formation were mostly sourced from eclogite- to greenschist-facies metasedimentary, metaigneous, and ultramafic rocks of the Guatemala suture complex. Minor contributions from the Chiapas Massif Complex, exposed directly to the south ~60 km of the Cerro Pelón area, were also suggested by the authors. They thus conclude that the Palaeogene stratigraphic record in southeastern Mexico was mostly controlled by the development of the Caribbean–North America plate boundary rather than by orogenic processes at the Pacific margin of North America. Presently, we do not agree with the conclusions of Ortega Flores and colleagues who studied the Cerro Pelón section, thus some discussion is required. Serpentinite bearing Nanchital Conglomerate is well exposed in the Cerro Pelón area, and high- to low-grade metamorphic rocks experienced an uplift in the vicinity of the Cerro Pelón area at the time of deposition of the La Laja Formation. We believe the data are better explained by multiple local sources in southern and eastern Oaxaca as well as sources to the south and southwest, which include the Cenozoic coastal batholith, the Grenvillean/Guichicovi basement complexes, the Chiapas Massif, the Mazatlán schist and other units in the Cuicateco Belt, as well as the Mesozoic cover of these areas (Todos Santos Formation, Cretaceous carbonate rocks, and Paleogene strata such as the Soyaló and Bosque Formations).     

The influence of thermohaline fronts on chlorophyll a concentrations during spring and summer in the southeastern Yellow Sea

A spatial and temporal variation in physiochemical parameters in the southeastern Yellow Sea(YS) is investigated in the spring and summer of 2009 to 2011.Nutrient show a strong negative relationship with chlorophyll a(Chl a) concentration in spring,and the subsurface chlorophyll a maxima(SCM) layer was associated with the nitracline in summer.In summer,the SCM was usually found within or above the pycnocline and at the depths of shoals from the open sea to the coastal sea due to tidal and/or topographical fronts in the southernmost study area.High Chl a concentrations were found in the central southern YS,where the YS cold water layer expanded under the pycnocline and encountered water masses during spring and summer.After a typhoon in the summer of 2011,Chl a concentration increased,especially in the central southern YS,where cold waters occurred below the pycnocline.The results suggest that the development of thermohaline fronts may play an important role in the growth and accumulation of phytoplankton biomass in the upper layer of the southeastern YS during spring and summer.     

Paleoproterozoic Age of Carbonates and Trondhjemites of the Central Azov Group: Sr Isotope Chemostratigraphy and U–Pb Geochronology

Doklady Earth Sciences - The Sr isotope characteristic of carbonate rocks in the Central Azov Group has been reported (0.70322–0.70352), the Nd model age of silicate sediments has been...     

Climate change adaptation of coffee production in space and time

Savannas constitute the most fire-prone vegetation type on earth and are a significant source of greenhouse gas emissions. Most savanna fires are lit by people for a variety of livelihood applications. ‘Savanna burning’ is an accountable activity under the Kyoto Protocol, but only Australia, as a developed economy, accounts for emissions from this source in its national accounts. Over the past decade considerable effort has been given to developing savanna burning projects in northern Australia, combining customary indigenous (Aboriginal) approaches to landscape-scale fire management with development of scientifically robust emissions accounting methodologies. Formal acceptance by the Australian Government of that methodology, and its inclusion in Australia’s developing emissions trading scheme, paves the way for Aboriginal people to commercially benefit from savanna burning projects. The paper first describes this Australian experience, and then explores options for implementing community-based savanna burning emissions reduction projects in other continental savanna settings, specifically in Namibia and Venezuela. These latter examples illustrate that savanna fire management approaches potentially have broader application for contributing to livelihood opportunities in other fire-prone savanna regions.     

Near-surface soil stabilization by enzyme-induced carbonate precipitation for fugitive dust suppression

Acta Geotechnica - To resolve the environmental and sustainability issues from fugitive dust emission and conventional mitigation methods, multiple experiments were conducted to evaluate the...     

Seasonal dynamics influencing coastal primary production and phytoplankton communities along the southern Myanmar coast

Myanmar is tenth among the world’s fish-producing countries and third in ASEAN (Association of Southeast Asian Nations). To understand the mechanisms underlying the high production, oceanographic and phytoplankton surveys, including primary productivity measurements based on pulse amplitude modulation fluorometry, were conducted near an active fishing ground near Myeik City. Three surveys, one in each of the representative seasons and covering the characteristic coastal environments, showed well-defined seasonality in primary production and phytoplankton occurrence. End of the dry season was the most productive, with productivity of 2.59 ± 1.56 g C m^?2 day^?1 and high concentration of chlorophyll a (3.14 ± 2.64 µg L^?1). In this season, the phytoplankton population was dominated by high densities of the diatoms Bellerochea horologicalis and Chaetoceros curvisetus, whereas primary productivity was low at the onset of the dry season, 1.36 ± 0.77 g C m^?2 day^?1. However, this low primary production might be compensated by activation of microbial food chains originating from high dissolved organic carbon. The rainy season exhibited the lowest production, 6.6% of the end of the dry season, due to the extensive discharge of turbid water from the rivers which lowered euphotic layer depth and resulted in an unusually high diffuse attenuation coefficient of 2.30 ± 1.03 m^?1. This incident of turbid water may be related to soil erosion from deforestation and mangrove deterioration. This research reveals the seasonal trend in Myanmar’s coastal productivity and its relationship to the tropical monsoon climate as well as emphasizing the importance of tropical coastal environments to the sustainability of the fisheries.     

Particle shape effect on thermal conductivity and shear wave velocity in sands

This study presents the correlations between quantified shape parameters and geotechnical properties for nine sand specimens. Four shape parameters, sphericity, convexity, elongation and slenderness, were quantified with two-dimensional microscopic images with the aid of image processing techniques. An instrumented oedometer cell is used to measure compressibility, thermal conductivity and shear wave velocity during loading, unloading and reloading stages. As the particle shape inherently determines the initial loose packing condition, initial void ratio and shape parameters are well correlated with compressibility. The applied stress in soils increases the interparticle contact area and contact quality; round particles tend to achieve higher thermal conductivity and shear wave velocity during stress-induced volume change. Multiple linear regression is implemented to capture the relative contributions of involved variables, revealing that the thermal evolution is governed by the initial packing density and particle shape. The experimental observations underscore the predominant effect that particle shape has on the geomechanical and physical properties upon stress-induced soil behavior.     

Early Cretaceous porphyry copper mineralization in Northeast China: the Changfagou example

The Changfagou Cu deposit is a newly discovered porphyry deposit located in the southern Jilin Province of Northeastern China, on the northeastern margin of the North China Craton. To better understand the formation of the Cu deposit, we report the zircon U–Pb and molybdenite Re–Os dating, and Sr-, Nd-, and Hf- isotopic data of the granite porphyry. LA-ICP-MS dating of zircon grains from two mineral zones in the granite porphyry yield ages of 115.7 ± 0.8 and 115.3 ± 0.6 Ma, which is interpreted as the emplacement age of the granite porphyry. The molybdenite Re–Os model ages of 112.5 to 113.8 Ma, an isochron age of 113.3 ± 1.3 Ma, and a weighted mean model age of 113.0 ± 0.7 Ma, which represents the age of the Cu mineralization quite well. The Changfagou granite porphyry samples lack amphibole and muscovite, and are compositionally characterized by high SiO₂, high Na₂O+K₂O, and low P₂O₅, enriched in some Rb, Th, U, and Pb, and depleted in Nb, Ta, Ti, P, and Eu. Mineralogical and geochemical features suggest that the Changfagou granite porphyry samples are slightly peraluminous and are of highly fractionated I-type granitoids. The granitic rocks also have relatively high (⁸⁷Sr/⁸⁶Sr)_i (0.71199 to 0. 71422), and both low εNd(t) (?14.56 to ?13.19) and εHf(t) values (?14.916 to ?8.644), which suggest that Changfagou granite porphyry are derived from mixed sources of crustal and mantle, and diagenesis and mineralization were possibly related to the switch in subduction direction of the Palaeo-Pacific Plate in the late phase of Early Cretaceous.     

Electrokinetic Removal of Petroleum Hydrocarbon from Residual Clayey Soil Following a Washing Process

This study investigates total petroleum hydrocarbon (TPH) removal from residual clayey soil, after a washing procedure, using an electrokinetic process. Eight electrokinetic experiments were carried out to investigate the characteristics of TPH removal. When 0.1 M MgSO₄ or 0.1 M NaOH was used as an electrolyte, the electric current rapidly increased within the first 100 or 200 h, respectively. A negatively charged soil surface resulted in a more negative zeta potential and greater electroosmotic flow toward the cathode. Therefore, the accumulated electroosmotic flow (EOF) when using 0.1 M NaOH as the anolyte‐purging solution was higher than when using 0.1 M MgSO₄. Although the energy consumption for the two purging solutions was similar, the efficiencies of TPH removal when 0.1 M MgSO₄ and 0.1 M NaOH with surfactant were used were 0 and 39%, respectively, because the electroosmotic flow rate increased with TPH removal efficiency. When 5% isopropyl alcohol (IPA) was used as a circulation solution, the electric current increased but the TPH removal was similar to that using water. In terms of energy consumption, the use of a surfactant‐enhanced electrokinetic process with NaOH as electrolyte was effective in removing TPHs from low‐permeability soil.