Morphological characters of the two-ribbon flare of 1981 May 13 and their explanation

We give a summary of the morphology of the two-ribbon flare of 1981 May 13. One striking feature is that the Ha flare began at about 0338' UT and the double-ribbon structure was formed about 0346, $\text{before}$ the impulsive phase of the radio 3 cm burst at 04 11 UT. The 3 cm radio burst flux beginning at 03 33 UT showed only slow, stepwise increases lasting half an hour until the impulsive phase and this type of increase is usually regarded to be a typical thermal process. Each step in the radio flux corresponded to a variation in the Ha flare, showing that the radio and Hα emissions during this period came from the same thermal source. In this paper, we explain this behaviour in terms of Hyder's model: we think that the magnetic trough supporting the solar prominence rose for some reason, causing the prominence matter (the dark filaments) to fall along the magnetic lines and to hit the chromosphere and trigger off the flare. We give rough estimates of the energy density, the height of prominence and the infall matter at the different radio increments. We also give a qualitative explanation for the appearances of the single-peak structure in the radio burst at 0411 and the covering of the sunspot shortly after at 04 13 and propose several possible mechanisms.     

FITS、BMP和SCR图象格式及相互转换

本文详细介绍图象的ＦＩＴＳ格式、ＢＭＰ格式和ＳＣＲ格式。ＦＩＴＳ格式已经是天文界的通用格式，几乎所有的天文软件包都支持这一格式，而ＢＭＰ格式在ＰＣ计算机上有广泛的运用，有大量ＰＣ软件支持ＢＭＰ图象的显示，处理和打印。云南天文台的ＳＣＲ格式是ＰＣ机采集ＣＣＤ图象所使用的格式。实现这三种格式的相互转换，就可以自由的将ＣＣＤ图象在ＰＣ机和工作站上进行各种处理。转换的包括图象头和图象数据的转换，其关键在于交换数据的高低字节。     

The theory of relativity and super-luminal-speeds

According to some local properties of Lorentz transformation, Einstein stated: Velocities greater than that of light have no possibility of existence. He neglected to point out the applicable range of the special theory of relativity. In fact, it could only be applied to the subluminal-speed. This paper shows that if we think of the possibility of the existence of the superluminal-speed and redescribe the special theory of relativity following Einstein's way, a new kinematic theory would be founded. The new theory would retain all kinematical meaning of the special theory of relativity when matters move with subluminal-speed and would give new content when matters move with superluminal-speed. The paper also discusses the observation principle for the motions with superluminal-speed.     

从统计分析看控制东海重矿物分布的因素

任何地质作用过程都是复杂的,东海也不例外,其沉积过程具有长期性、继承性和叠加性的特点.因而反映在矿物组合及其分布变化上较为复杂,影响因素颇多.然而,运用数学地质方法却可帮助我们寻找和确定其主要的影响因素,查明它们的相互关系,甚至建立定量描述的模式.而这正是传统地质学研究中的难题之一.     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

厦门港湾和闽南-台湾浅滩海域鱼类感染吸虫的调查研究

本文根据1980～1986年厦门港湾和闽南-台湾浅滩海域的调查资料,报道了该海区鱼类感染复殖吸虫的概况。在我们检查的106种鱼类中,从其中54种的消化道和1种的体腔中发现复殖吸虫标本1269个,感染率为28.24%。本海区鱼类生态习性虽有差异,其感染率和阳性鱼的感染度可能有明显差异,但从总体上看,不同生态类群鱼类的吸虫密度分布甚为均匀。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

水库地震主震发生时间的预测

水利工程对水库地震的抗震设防要求事先对水为地震进行预测。预测内容包括蓄水后诱发地震的危险性（可能性、）最大震级、最大震的地占紧及不库地震对场址地震动参数的影响。除主震时间的预测外，本文第一作者都曾提出过初步的预测方法。本文认为，水库地震前震波速比异常、非线性灰色模型以及前震系列回归等方法，是预测主震时间的有前途的方法。     

地理信息系统（GIS）在地下水领域中的应用及最新进展

ＧＩＳ是信息时代的产物，在地下水资源领域的研究日益广泛和深入。笔者着重阐述了ＧＩＳ在地下水领域的应用及最新发展，同时对ＧＩＳ在地下水应用中的优点和局限性提出了自己的观点。