High energy phenomena in eta carinae

We have investigated with BeppoSAX the long term behaviour of the harder X-ray component of the supposed supermassive binary system η Car along its 5.52 year cycle. We have found that in March 1998 during egress from the last December 1997 eclipse, this component was the same as outside eclipse, but for a large (×3.5) increase of NH _h , that can be attributed to the presence or formation of opaque matter in front of the source near periastron. Unexpectedly, at that time the iron 6.7 keV emission line was 40% stronger. BeppoSAX has for the first time found ahard X-ray tail extending to at least 50 keV, that cannot be adequately fitted with an additional hotter thermal component. The 2–100 keV spectrum of η Car is instead well fitted with an absorbed powerlaw spectrum with photon index 2.53, suggesting non-thermal emission as an alternative model for the core source.     

Gas hydrate and free gas distribution from inversion of seismic data on the South Shetland margin (Antarctica)

Travel-time inversion is applied to seismic data to produce acoustic velocity images of the upper 800 m of the South Shetland margin (Antarctic Peninsula) in three different geological domains: (i) the continental shelf; (ii) the accretionary prism; (iii) the trench. The velocity in the continental shelf sediments is remarkably higher, up to 1000 m/s at 600–700 m below seafloor, than that of the other two geological domains, due to the sediment overcompaction and erosion induced by the wax and waning of a grounded ice sheet. Pre-stack depth migration was applied to the data in order to improve the seismic image and to test the quality of the velocity fields. Where the Bottom Simulating Reflector (BSR) is present, positive and negative velocity anomalies were found with respect to a reference empirical velocity profile. The 2D-velocity section was translated in gas hydrate and free gas distribution by using a theoretical approach. The analysis revealed that the BSR is mainly related to the presence of free gas below it. The free gas is distributed in the area with variable concentration and thickness, while the gas hydrate is quite uniformly distributed across the margin.     

Heavy metals in marine sediments of Taranto Gulf (Ionian Sea, Southern Italy)

Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Ti and Zn concentrations have been determined in surface sediment samples collected in the Taranto Gulf (Ionian Sea, Southern Italy) in order to evaluate their levels and spatial distribution in this important area of the Mediterranean Sea. For various metals, the geoaccumulation index has been calculated as a criterion to assess if their concentrations represent contamination levels or can be considered as background levels. The results show that metals concentrations in sediments can be considered near the background levels found in the Mediterranean Sea.Analytical results have been elaborated by using a Geographical Information System (GIS) software to show metals accumulation areas. Using multivariate statistical analysis, we evaluate the possibility to distinguish the sampling stations, in relation to their geographical position. Results have showed metals distribution in the Taranto Gulf is principally influenced by industrial and urban wastes, located mostly in the northern coastal area of the Ionian Sea. Rivers in the Basilicata region and prevailing anticlockwise marine currents are further factors influencing metal accumulation in sediments.     

Fractional crystallization models and B–Be–Li systematics at Mt Somma-Vesuvius volcano (Southern Italy)

A compilation of B–Be–Li data on rocks that cover the entire eruptive history of Somma-Vesuvius is presented and interpreted in the light of evolution models for the Somma-Vesuvius rocks. Using major and trace element data, fractional crystalllization models are presented for different geochemical units. These data were used to constrain the source mineralogy of the Somma-Vesuvius rocks (ol-opx-cpx-gar-amp of 0.4-0.3-0.1-0.1-0.1), the amount of sediment added (5–10%) and the melt fraction from batch partial melting computations (0.05–0.1). From the B–Li data it is inferred that the main process responsible for the B isotopic signature is sediment recycling. However, the B–Li data show a major variation in Li abundances respect to B which is explained with Li dehydration before the fluid enriched the mantle wedge that produced the arc magmas. The Somma-Vesuvius B isotope composition is intermediate between that of the Campi Flegrei and the broad field of the Eolian Island arc. A low Be isotopes in the recent volcanic rocks can be explained as: (a) the top 1–22 m of the incoming sediment is accreted, (b) large amounts of sediment erosion, (c) a slow rate of subduction which have provoked a long magmatic history for the Vesuvius magma, (d) the sediment component takes several Myr longer than the subducting plate to reach the magma source region beneath Italy.     

Verification of the dualism ordering method by the canonical correspondence analysis: fish community samples

Two ordination techniques (Romaniszyn diagram, RD, and Canonical correspondence analysis, CCA) were applied to the same data set (fish assemblage composition along two Paraná river tributaries and associated environmental variables), to identify spatial community patterns and further to evaluate the performance of RD. The major patterns in these Brazilian streams were successfully revealed by both methods (i.e. clear separation of both tributaries on the basis of fish assemblage composition and environmental factors), but more complex situations may limit the application of RD in comparison with CCA.     

Climate control on stacked paleosols in the Pleistocene of the Po Basin (northern Italy)

Paleosols are recurrent features in alluvial successions and provide information about past sedimentary dynamics and climate change. Through sedimentological analysis on six sediment cores, the mud-dominated succession beneath the medieval ‘Two Towers’ of Bologna was investigated down to 100 m depth. A succession of weakly developed paleosols (Inceptisols) was identified. Four paleosols (P1, P2, P3 and PH) were radiocarbon-dated to 40–10 cal ka bp . Organic matter and CaCO₃ determinations indicate low groundwater levels during soil development, which spanned periods < 5 ka. The development and burial of soils, which occurred synchronously in the Bologna region and in other sectors of the Po Plain, are interpreted to reflect climatic and eustatic variations. Climatic oscillations, at the scale of the Bond cycles, controlled soil development and burial during Marine Isotope Stage (MIS) 3 (P1 and P2). Rapid sea-level oscillations probably induced soil development at the MIS 3/2 transition (P3) and favored burial of PH after 10 ka bp . Weakly developed paleosols in alluvial successions can provide clues to millennial-scale climatic and environmental variations. In particular, the paleosol-bearing succession of the Po Plain represents an unprecedent record of environmental changes across the Late Pleistocene (MIS 3 and 2) in the Mediterranean region.     

Late‐glacial to Holocene depositional architecture of the Ombrone palaeovalley system (Southern Tuscany,Italy): Sea‐level,climate and local control in valley‐fill variability

The Ombrone palaeovalley was incised during the last glacial sea‐level fall and was infilled during the subsequent Late‐glacial to Holocene transgression. A detailed sedimentological and stratigraphic study of two cores along the palaeovalley axis led to reconstruction of the post‐Last Glacial Maximum valley‐fill history. Stratigraphic correlations show remarkable similarity in the Late‐glacial to early‐Holocene succession, but discrepancy in the Holocene portion of the valley fill. Above the palaeovalley floor, about 60 m below sea‐level, Late‐glacial sedimentation is recorded by an unusually thick alluvial succession dated back to ca 18 cal kyr bp . The Holocene onset was followed by the retrogradational shift from alluvial to coastal facies. In seaward core OM1, the transition from inner to outer estuarine environments marks the maximum deepening of the system. By comparison, in landward core OM2, the emplacement of estuarine conditions was interrupted by renewed continental sedimentation. Swamp to lacustrine facies, stratigraphically equivalent to the fully estuarine facies of core OM1, represent the proximal expression of the maximum flooding zone. This succession reflects location in a confined segment of the valley, just landward of the confluence with a tributary valley. It is likely that sudden sediment input from the tributary produced a topographic threshold, damming the main valley course and isolating its landward segment from the sea. The seaward portion of the Ombrone palaeovalley presents the typical estuarine backfilling succession of allogenically controlled incised valleys. In contrast, in the landward portion of the system, local dynamics completely overwhelmed the sea‐level signal, following marine ingression. This study highlights the complexity of palaeovalley systems, where local morphologies, changes in catchment areas, drainage systems and tributary valleys may produce facies patterns significantly different from the general stratigraphic organization depicted by traditional sequence‐stratigraphic models.     

The influence of physical and biological processes on the ichthyoplankton communities in the Gulf of Sirte (Southern Mediterranean Sea)

This paper reports on the first study on the ichthyoplankton community structure in the Gulf of Sirte and its spatial distribution in relation to environmental conditions and zooplankton abundance. The results make an important contribution to the future management of fisheries in this unexplored, but much exploited, area. Biological samples were collected in July 2008 using a Bongo40 net. In total, 1914 larvae were found and 1652 of these were identified. In particular, bathypelagic taxa were the most abundant, followed by demersal, mesopelagic, pelagic and epipelagic taxa. The ichthyoplankton community had a patchwork distribution influenced by oligotrophic conditions, the bottom depth and oceanographical features. The results suggest that environmental forcings were able to transport the ichthyoplankton to productive areas. Indeed, maximum fish egg densities were found in coastal stations in correspondence with the Atlantic Tunisian Current inflow, whereas larvae were mainly concentrated in the east side of the Gulf, probably as a result of advection by the anticyclonic circulation. Additionally, the distribution patterns of the total larvae density and the different assemblages were well matched with the abundance of the zooplankton, probably determining final larval survival, growth and recruitment.     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.