Petrology of the Baszkówka L5 chondrite: A record of surface‐forming processes on the parent body

Abstract— We review the petrology of Baszkówka, present new microprobe data on mineral constituents, and propose a model for surface properties of the parent body consistent with these data. The low shock index and high porosity of the Baszkówka L5 chondrite mean that considerable primary textural and petrographic detail is preserved, allowing insight into the structure and evolution of the parent body. This meteorite formed in a sedimentary environment resembling that in which pyroclastic rocks are deposited. The origin of the component chondrules, achondritic fragments (mostly olivine and pyroxene aggregates), chondritic‐achondritic aggregates, and compound chondrules can be explained by invoking collision of 2 melted or partially melted planetesimals, each covered with a thin crust. This could have happened at an early stage in the evolution of the solar system, between 1 and 2 Myr after its origin. The collision resulted in the formation of a cloud containing products of earlier magmatic crystallization (chondrite and achondrite fragments) from which new chondrules were created. Particle collision in this cloud produced fragmented chondrules, chondritic‐achondritic aggregates, and compound chondrules. Within this low‐density medium, these particles were accreted on the surface of the larger of the planetesimals involved in the collision. The density of the medium was low enough to prevent grain‐size sorting of the components but high enough to prevent the total loss of heat and to enable the welding of fragments on the surface of the body. The rock material was homogenized within the cloud and, in particular, within the zone close to the planetesimal surface. The hot material settled on the surface and became welded as molten or plastic metal, and sulfide components cemented the grains together. The process resembled the formation of welded ignimbrites. Once these processes on the planetesimal surface were completed, no subsequent recrystallization occurred. The high porosity of the Baszkówka chondrite indicates that the meteorite comes from a near‐surface part of the parent body. Deeper parts of the planetesimal would have been more massive because of compaction.     

Combined mine tremors source location and error evaluation in the Lubin Copper Mine (Poland)

A modified method of mine tremors location used in Lubin Copper Mine is presented in the paper. In mines where an intensive exploration is carried out a high accuracy source location technique is usually required. The effect of the flatness of the geophones array, complex geological structure of the rock mass and intense exploitation make the location results ambiguous in such mines. In the present paper an effective method of source location and location's error evaluations are presented, combining data from two different arrays of geophones. The first consists of uniaxial geophones spaced in the whole mine area. The second is installed in one of the mining panels and consists of triaxial geophones. The usage of the data obtained from triaxial geophones allows to increase the hypocenter vertical coordinate precision. The presented two-step location procedure combines standard location methods: P-waves directions and P-waves arrival times. Using computer simulations the efficiency of the created algorithm was tested. The designed algorithm is fully non-linear and was tested on the multilayered rock mass model of the Lubin Copper Mine, showing a computational better efficiency than the traditional P-wave arrival times location algorithm. In this paper we present the complete procedure that effectively solves the non-linear location problems, i.e. the mine tremor location and measurement of the error propagation.     

Groundwater recharge of carbonate aquifers of the Silesian-Cracow Triassic (southern Poland) under human impact

A Triassic carbonate unit has been intensively drained by zinc and lead ore mines and numerous borehole fields since the nineteenth century. Its groundwater recharge has increased due to: pumping of water from boreholes, mining activity, and urbanization. An approach to determine the amounts of the recharge at a variety of spatial scales is presented in the paper. Different methods were used to identify and quantify recharge components on a regional and local scale: mathematical modelling was performed for four aquifers included in an aquifer system, an analytical estimation based on the assumption that an average recharge is equal to the average discharge of the hydrogeological system—for six man-made drainage centres, and the method of water level fluctuation (WLF) was applied in one observation borehole. Results of modelling have been supplemented by observation of environmental tracers (δ¹⁸O, δ²H, ³H), noble gases temperatures, and ⁴He_exc in groundwater. The regional aquifer’s current recharge according to estimations performed by means of modelling varies from 39 to 101 mm/year on average. Depending on the aquifer site the average precipitation ranges from 779 to 864 mm/year. In the confined part of the aquifer average recharge ranges from 26 to 61 mm/year. Within outcrops average recharge varies from 96 to 370 mm/year. Current recharge estimated by the analytical method for man-made drainage centres varies from 158 up to 440 mm/year. High values are caused by different recharge sources like precipitation, induced leakage from shallow aquifers, and water losses from streams, water mains and sewer systems. Pumping of water, mining and municipal activities constitute additional factors accounting for the intensified recharge.     

System for normalization of a hamiltonian function based on lie series

A software system for normalization of a Hamiltonian function is described. A few examples of its applications are given. It is written in PASCAL and runs on an IBM XT/AT with 640 KB memory.     

Geophysical and geochemical evidence of Proterozoic collision in the western marginal zone of the Baltic Shield

New continental crust was formed in the Svecofennian domain of the Baltic Shield c. 1.9 Ga ago. Approximately 0.1–0.15 Ga later, new crust accreted to the SW part of the Shield. In this paper an attempt is made, on the basis of gravity measurements and lithogeochemistry, to describe the tectonic processes responsible for the continental growth c. 1.75–1.8 Ga ago. The Transscandinavian Granite Porphyry Belt (TGPB) separates the Svecofennian domain from the polymetamorphic terrain of the SW Swedish gneiss region. Red orthogneisses occurring immediately west of the TGPB are the deformed equivalents of the TGPB type granitoids, while grey orthogneisses, displaying a tonalitic-granodioritic trend and situated further west, were generated in a »volcanic arc« environment. The TGPB granitoids and the red SW Swedish gneisses represent a transition from this volcanic arc type rock to contemporaneous »within-plate« type granites intruded in the Svecofennian crust. The volcanic arc was forced against the Svecofennian crust in which large tensional fracture zones ensued with strike directions normal to the collision front. In such tensional environments the »withinplate« type granites were generated. In the collision zone the crust was down-warped, and huge amounts of granitic melts were generated at the base of the crust. This TGPB Magma rose upwards utilizing the fracture zone between the arc rocks, generated slightly earlier, and the Svecofennian crust. A relatively thin upper part of the TGPB that spread laterally westwards became strongly deformed during the collision (i.e. the red SW Swedish gneisses), while the major deep-reaching TGPB root zone that was not completely solidified yet, acted as a buffer against the foliation front.

---

Zusammenfassung Vor 1,9 Milliarden Jahren kam es zur Neubildung von kontinentaler Kruste im svecofennischen Bereich des Baltischen Schildes. Ungefähr 100–150 Millionen Jahre später wurde im Südwesten des Schildes neue Kruste hinzugefügt. In diesem Artikel wird auf der Basis von Gravimetriemessungen und Lithogeochemie der Versuch unternommen die tektomschen Vorgänge, die zu diesem 1,75–1,8 Milliarden Jahre alten Krustenzuwachs führten, zu beschreiben.Der Transskandinavische-Granit-Porphyr-Gürtel (Transscandinavian-Granite-Porphyry-Belt/TGPB) trennt das Svecofennium von der polymetamorphen, im Südwesten Schwedens gelegenen Gneis-Region. Ein direkt westlich des TGPB gelegenes Vorkommen roter Orthogneise entspricht den deformierten TGPB Granitoiden. Graue Orthogneise, die weiter im Westen aufgeschlossen sind, zeigen eine mehr tonalitische bis granodioritische Zusammensetzung und werden auf einen vulkanischen Inselbogen zurückgeführt. Die TGPB Granitoide und die roten südwest-schwedischen Gneise stellen einen Übergang von den Inselbogen-Vulkaniten zu den zeitgleichen »Intra-Platten-Graniten« der svecofennischen Kruste dar. Der Inselbogen kollidierte mit der svecofennischen Kruste, es entstanden großräumige Bruchzonen mit Streichrichtungen senkrecht zur Kollisionsebene. Während des Zustands der hohen Druckspannung des Gebietes intrudierten die »Intra-Platten-Granite«. Innerhalb des Kollisionsbereiches wurde die Kruste nach unten gebogen, und so entstanden an der Basis der Kruste große Mengen granitischen Magmas. Dieses TGPB Magma stieg entlang der Störungszone innerhalb der Inselbogengesteine, die nur wenig älter sind, und der svecofennischen Kruste, auf. Nur ein, von relativ geringer Mächtigkeit, weiter westlich gelegener Teil des TGPB, die roten südwest-schwedischen Gneise, wurde während der Kollision intensiv deformiert. Dagegen war der Hauptanteil der tiefreichenden TGPB Wurzelzone noch nicht vollständig erstarrt und wirkte deshalb wie eine Pufferzone gegen die Schieferungsfront.

---

Résumé De la croûte continentale nouvelle s'est formée il y a 1,9 Ga dans le domaine des Svecofennides (Bouclier baltique). Environ 100 à 150 Ma plus tard, de la croûte nouvelle s'est accrétionnée à la bordure sud-ouest du bouclier. Cette note basée sur des mesures de gravité et la lithogéochimie, présente un essai d'analyse des processus tectoniques responsables de cette croissance continentale d'âge 1,75 à 1,8 Ga. Le «Transcandinavian Granite Porphygry Belt» (TGPB) sépare le domaine svécofennien des gneiss polymétamorphiques du sud-ouest de la Suède. Immédiatement à l'ouest de TGPB affleurent des orthogneiss rouges qui représentent l'équivalent déformé de granitoïdes du TGPB, tandis que des orthogneiss gris de tendance tonalitique-granodioritique, situés plus à l'ouest, ont été engendrées dans un environnement d'arc volcanique. Les granitoïdes du TGPB et les gneiss rouges du sud-ouest de la Suède représentent une transition entre ces produits d'arc volcanique et les granites intra-plaque de même âge intrudés dans la croûte svécofennienne. L'arc volcanique a été accrétionné à la croûte svécofennienne avec production dans celleci de grandes fractures d'extension perpendiculaires au front de collision. C'est dans ce domaine en extension que les granites intra-plaque se sont mis en place. Dans la zone de collision, la croûte s'est incurvée vers le bas et de grandes quantités de liquides granitiques ont été engendrées à la base de la croûte. Ces magmas TGPB sont montés à la faveur de la zone fracturée entre les roches de l'arc engendrée un peu plus tôt, et la croûte svécofennienne. Seule une fraction supérieure relativement mince du TGPB, développée vers l'ouest, a subi une déformation importante au cours de la collision, pour former les gneiss rouges du sud-ouest de la Suède; par contre, la partie principale de la racine profonde du TGPB, qui n'était pas encore entièrement solidifiée, a joné le role tampon en avant du front de foliation.

---

, 1,9 100–150 - . - (Transscandinavian Granite-Porphyry-Belt - TGPB) , - . TGPB , , , - , . TGPB - . , , . («within plate» type granites) , . . TGPB , , . TGPB, , - , . TGPB, , .

     

Sensitivity analysis of automatic landslide mapping: numerical experiments towards the best solution

The automatic detection of landslides after major events is a crucial issue for public agencies to support disaster response. Pixel-based approaches (PBAs) are widely used in the literature for various applications. However, the accuracy of PBAs in the case of automatic landslide mapping (ALM) is affected by several issues. In this study, we investigated the sensitivity of ALM using PBA through digital terrain models (DTMs). The analysis, carried out in a study area of Poland, consisted of the following steps: (1) testing the influence of selected DTM resolutions for ALM, (2) assessing the relevance of diverse landslide morphological indicators for ALM, and (3) assessing the sensitivity to landslide features for a selected size of moving window (kernel) calculations for ALM. Ultimately, we assessed the performance of three classification methods: maximum likelihood (ML), feed-forward neural network (FFNN), and support vector machine (SVM). This broad analysis, as combination of grid cell resolution, surface derivatives calculation, and performance classification methods, is the challenging aspect of the research. The results of almost 500 experimental tests provide valuable guidelines for experts performing ALM. The most important findings indicate that feature sensitivity in the case of kernel size increases with coarser DTM resolution; however, the peak of the optimal feature performance for the selected study area and landslide type was demonstrated for a resolution of 20 m. Another finding indicated that in combining a set of topographic variables, the optimal performance was acquired for a DTM resolution of 30 m and the support vector machine classification. Moreover, the best performance of the identification is represented for SVM classification.