Dynamical implications of Jupiter's tropospheric ammonia abundance

Groundbased radio observations indicate that Jupiter's ammonia is globally depleted from 0.6 bars to at least 4-6 bars relative to the deep abundance of ∼3 times solar, a fact that has so far defied explanation. The observations also indicate that (i) the depletion is greater in belts than zones, and (ii) the greatest depletion occurs within Jupiter's local 5-μm hot spots, which have recently been detected at radio wavelengths. Here, we first show that both the global depletion and its belt-zone variation can be explained by a simple model for the interaction of moist convection with Jupiter's cloud-layer circulation. If the global depletion is dynamical in origin, then important endmember models for the belt-zone circulation can be ruled out. Next, we show that the radio observations of Jupiter's 5-μm hot spots imply that the equatorial wave inferred to cause hot spots induces vertical parcel oscillation of a factor of ∼2 in pressure near the 2-bar level, which places important constraints on hot-spot dynamics. Finally, using spatially resolved radio maps, we demonstrate that low-latitude features exceeding ∼4000 km diameter, such as the equatorial plumes and large vortices, are also depleted in ammonia from 0.6 bars to at least 2 bars relative to the deep abundance of 3 times solar. If any low-latitude features exist that contain 3-times-solar ammonia up to the 0.6-bar ammonia condensation level, they must have diameters less than ∼4000 km.     

Oil-weathering behavior in Arctic environments

Oil-weathering processes in ice-free subarctic and Arctic waters include spreading, evaporation, dissolution, dispersion of whole-oil droplets into the water column, photochemical oxidation, water-in-oil emulsification, microbial degradation, adsorption onto suspended particulate material, ingestion by organisms, sinking, and sedimentation. While many of these processes also are important factors in ice-covered waters, the various forms of sea ice (depending on the active state of ice growth, extent of coverage and/or decay) impart drastic, if not controlling, changes to the rates and relative importance of different oil-weathering mechanisms. Flow-through seawater wave-tank experiments in a cold room at −35°C and studies in the Chukchi Sea in late winter provide data on oil fate and effects for a variety of potential oil spill scenarios in the Arctic. Time-series chemical weathering data are presented for Prudhoe Bay crude oil released under and encapsulated in growing first-year columnar ice through spring breakup.     

Biotite weathering and nutrient uptake by ectomycorrhizal fungus, Suillus tomentosus, in liquid-culture experiments

Ectomycorrhiza-forming fungi (EMF) alter the nutrient-acquisition capabilities of vascular plants, and may play an important role in mineral weathering and the partitioning of products of weathering in soils under nutrient-limited conditions. In this study, we isolated the weathering function of Suillus tomentosus in liquid-cultures with biotite micas incubated at room temperature. We hypothesized that the fungus would accelerate weathering by hyphal attachment to biotite surfaces and transmission of nutrient cations via direct exchange into the fungal biomass. We combined a mass-balance approach with scanning electron microscopy (SEM) and atomic force microscopy (AFM) to estimate weathering rates and study dissolution features on biotite surfaces. Weathering of biotite flakes was about 2-3 orders of magnitude faster in shaken liquid-cultures with fungus compared to shaken controls without fungus, but with added inorganic acids. Adding fungus in nonshaken cultures caused a higher dissolution rate than in inorganic pH controls without fungus, but it was not significantly faster than organic pH controls without fungus. The K⁺, Mg²⁺ and Fe²⁺ from biotite were preferentially partitioned into fungal biomass in the shaken cultures, while in the nonshaken cultures, K⁺ and Mg²⁺ was lost from biomass and Fe²⁺ bioaccumulated much less. Fungal hyphae attached to biotite surfaces, but no significant surface changes were detected by SEM. When cultures were shaken, the AFM images of basal planes appeared to be rougher and had abundant dissolution channels, but such channel development was minor in nonshaken conditions. Even under shaken conditions the channels only accounted for only 1/100 of the total dissolution rate of 2.7 × 10⁻¹⁰ mol of biotite m⁻² s⁻¹. The results suggest that fungal weathering predominantly occurred not by attachment and direct transfer of nutrients via hyphae, but because of the acidification of the bulk liquid by organic acids, fungal respiration (CO₂), and complexation of cations which accelerated dissolution of biotite. Results further suggest that both carbohydrate source (abundant here) and a host with which nutrients are exchanged (missing here) may be required for EMF to exert an important weathering effect in soils. Unsaturated conditions and physical dispersal of nutrient-rich minerals in soils may also confer a benefit for hyphal growth and attachment, and promote the attachment-mediated weathering which has been observed elsewhere on soil mineral surfaces.     

Plesiosaurs

Plesiosaurs are an unusual and intriguing group of extinct aquatic reptiles ( Fig. 1 ). They are sauropterygians, a group known from an array of semi‐aquatic forms during the Triassic period: placodonts, pachypleurosaurs and nothosaurs. The first plesiosaurs are known from the very latest Triassic, but by the Early Jurassic plesiosaurs were cosmopolitan in distribution and lasted successfully to the latest Cretaceous, when they became victims of the K‐T extinction event. Plesiosaurs were predominantly marine organisms, although their fossils are not uncommon in brackish or even fresh water deposits. We know that all plesiosaurs were carnivorous; many of them were top predators in their respective ecosystems. But with no living descendants (or analogues) plesiosaurs are mysterious fossil organisms—as we will see, many questions regarding their biology remain unanswered or contentious. However, plesiosaurs are currently undergoing renewed scientific attention.

Figure 1 Open in figure viewer PowerPoint The beautifully preserved skeleton of the plesiosaur Rhomaleosaurus victor seen in ventral view, from the Lower Jurassic (Toarcian) of Holzmaden, Germany (total length 3.44 m). Redrawn from Fraas (1910).     

Submarine canyon development in the Izu-Bonin forearc: A SeaMARC II and seismic survey of Aoga Shima Canyon

SeaMARC II sidescan (imagery and bathymetry) and seismic data reveal the morphology, sedimentary processes, and structural controls on submarine canyon development in the central Izu-Bonin forearc, south of Japan. Canyons extend up to 150 km across the forearc from the trench-slope break to the active volcanic arc. The canyons are most deeply incised (1200–1700 m) into the gentle gradients (1–2°) upslope on the outer arc high (OAH) and lose bathymetric expression on the steep (6–18°) inner trench-slope. The drainage patterns indicate that canyons are formed by both headward erosion and downcutting. Headward erosion proceeds on two scales. Initially, pervasive small-scale mass wasting creates curvilinear channels and pinnate drainage patterns. Large-scale slumping, evidenced by abundant crescent-shaped scarps along the walls and tributaries of Aoga Shima Canyon, occurs only after a channel is present, and provides a mechanism for canyon branching. The largest slump has removed >16 km³ of sediment from an 85 km² area of seafloor bounded by scarps more than 200 m high and may be in the initial stages of forming a new canyon branch. The northern branch of Aoga Shima Canyon has eroded upslope to the flanks of the arc volcanoes allowing direct tapping of this volcaniclastic sediment source. Headward erosion of the southern branch is not as advanced but the canyon may capture sediments supplied by unconfined (non-channelized) mass flows.Oligocene forearc sedimentary processes were dominated by unconfined mass flows that created sub-parallel and continuous sedimentary sequences. Pervasive channel cut-and-fill is limited to the Neogene forearc sedimentary sequences which are characterized by migrating and unconformable seismic sequences. Extensive canyon formation permitting sediment bypassing of the forearc by canyon-confined mass flows began in the early Miocene after the basin was filled to the spill points of the OAH. Structural lows in the OAH determined the initial locus of canyon formation, and outcropping basement rocks have prevented canyon incision on the lower slope. A major jog in the canyon axis, linear tributaries, and a prominent sidescan lineament all trend NW-NNW, reflecting OAH basement influence on canyon morphology. This erosional fabric may reflect joint/fracture patterns in the sedimentary strata that follow the basement trends. Once the canyons have eroded down to more erosion-resistant levels, channel downcutting slows relative to lateral erosion of the canyon walls. This accounts for the change from a narrow canyon axis in the thickly sedimented forearc basin to a wider, more rugged canyon morphology near the OAH. About 9500 km³ of sediment has been eroded from the central, 200 km long, segment of the Izu-Bonin forearc by the formation of Aoga Shima, Myojin Sho and Sumisu Jima canyons. The volume of sediment presently residing in the adjacent trench, accretionary wedge, and lower slope terrace basin accounts for <25% of that eroded from the canyons alone. This implies that a large volume (>3500 km³ per 100 km of trench, ignoring sediments input via forearc bypassing) has been subducted beneath the toe of the trench slope and the small accretionary prism. Unless this sediment has been underplated beneath the forearc, it has recycled arc material into the mantle, possibly influencing the composition of arc volcanism.     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

Inventory of nonvolatile fatty acids and hydrocarbons in the oceans

A survey of the distribution of nonvolatile fatty acids and hydrocarbons in the oceans is given. The results represent more a “feel” from the literature rather than a mathematical analysis and are given in Table III. Fatty acid concentration appears to show a greater variation, presumably because they are more prone to biological influences than the hydrocarbons.     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

Glacio-lacustrine stratigraphy,aquifer characterization and contaminant transport: a case study in South Lake Tahoe,California, USA

A hydrogeologic model that has been used by many researchers and consultants to describe an area of South Lake Tahoe, California, USA impacted by MTBE contamination describes a relatively homogeneous unconfined aquifer comprised of poorly sorted glacial outwash deposits, within which water-supply wells are able to exert significant alteration in natural groundwater flow. A re-examination of the area’s hydrogeology is presented, which supports a layered heterogeneous aquifer system constructed of alternating fine and coarser-grained glacio-lacustrine depositional units. This re-evaluation was accomplished through a review of lithologic logs across an area of approximately 1 km², combined with observations of significant hydraulic head differences and knowledge of the depositional environments controlled by Pleistocene Lake Tahoe high stands. Many of the fine-grained units observed at depths from 6 to 15 m, although relatively thin, are generally continuous and serve as significant barriers to groundwater flow. The vertical migration of contamination across these fine-grained units to deeper groundwaters was facilitated by cross-screened monitoring wells installed as part of site investigation activities. This conclusion highlights the importance of geologic characterization and proper monitoring well construction at contaminated site investigations.

---

Electronic supplementary material   The online version of this article (doi:) contains supplementary material, which is available to authorized users.