Comparison of TOPEX/POSEIDON Altimeter Derived Wind Speed and Wave Parameters with Ocean Buoy Data in the North Indian Ocean

Results of comparison exercises carried out between the state-of-the-art TOPEX/POSEIDON altimeter-derived ocean surface wind speed and ocean wave parameters (significant wave height and wave period) and those measured by a set of ocean data buoys in the North Indian Ocean are presented in this article. Altimeter-derived significant wave height values exhibited rms deviation as small as ±0.3 m, and surface wind speed of ±1.6 m/s. These results are found consistent with those found for the Pacific Ocean. For estimation of ocean wave period, the spectral moments-based semiempirical approach, earlier applied on GEOSAT data, was extended to TOPEX/POSEIDON. For this purpose, distributions of first four years of TOPEX/POSEIDON altimeter data and climatology over the North Indian Ocean were analyzed and a new set of coefficients generated for estimation of wave period. It is shown that wave periods thus estimated from TOPEX/POSEIDON data (for the subsequent two years), when compared with independent data set of ocean data buoys deployed in the North Indian Ocean, exhibit improved accuracy (rms ~ ±1.4 nos) over those determined earlier with GEOSAT data.     

Bianchi II,VIII, and IX viscous fluid cosmology

In this paper we study the exact solutions for a viscous fluid distribution in Bianchi II, VIII, and IX models. The metric is simplified by assuming a relationship between the coefficients of the metric tensor. Solutions are obtained in two special cases: in one an additional assumption is made where the matter density and the expansion scalar have a definite relation and in the other a barotropic equation of state of the formp= is assumed. While the Bianchi II solutions are already found in the literature the other two classes of solutions are apparently new.     

GIS-based flood hazard mapping at different administrative scales: A case study in Gangetic West Bengal, India

This paper addresses the need for an efficient and cost-effective methodology for preparing flood hazard maps in data poor countries, particularly those under a monsoon regime where floods pose a recurrent danger. Taking Gangetic West Bengal, India, as an example and using available historical data from government agencies, the study compiled a regional map indicating hazard prone subregional areas for further detailed investigation, thereby isolating actual high risk localities. Using a GIS (Geographical Information System), a composite hazard index was devised incorporating variables of flood frequency, population density, transportation networks, access to potable water, and availability of high ground and maximum risk zones were mapped accordingly. A digital elevation model derived from high resolution imagery available in the public domain was used to calculate elevated areas suitable for temporary shelter during a flood. Selecting administrative units of analysis at the lowest possible scales – rural development blocks (regional) and revenue villages (subregional) – also ensures that hazard mapping is prepared in line with the existing rural planning and administrative authorities responsible for remedial intervention.     

Application of Remote Sensing in Flood Management with Special Reference to Monsoon Asia: A Review

The conventional means to record hydrological parameters of aflood often fail to record an extreme event. Remote sensingtechnology along with geographic information system (GIS)has become the key tool for flood monitoring in recent years.Development in this field has evolved from optical to radarremote sensing, which has provided all weather capabilitycompared to the optical sensors for the purpose of flood mapping.The central focus in this field revolves around delineation of floodzones and preparation of flood hazard maps for the vulnerable areas.In this exercise flood depth is considered crucial for flood hazardmapping and a digital elevation model (DEM) is considered to bethe most effective means to estimate flood depth from remotelysensed or hydrological data. In a flat terrain accuracy of floodestimation depends primarily on the resolution of the DEM. Riverflooding in the developing countries of monsoon Asia is very acutebecause of their heavy dependence on agriculture but any floodestimation or hazard mapping attempt in this region is handicappedby poor availability of high resolution DEMs. This paper presents areview of application of remote sensing and GIS in flood managementwith particular focus on the developing countries of Asia.     

Significance of transition between Talchir Formation and Karharbari Formation in Lower Gondwana basin evolution — A study in West Bokaro Coal basin, Jharkhand, India

Basal part of the Gondwana Supergroup represented by Talchir and Karharbari Formations (Permo-Carboniferous) records an abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment. The contact between the two is an unconformity. Facies analysis of the glacio-marine Talchir Formation reveals that basal glaciogenic and reworked glaciogenic sediments are buried under storm influenced inner and outer shelf sediments. Facies associations of the Karharbari Formation suggest deposition as fluvio-lacustrine deposits in fault-controlled troughs. An attempt has been made in this paper to explain the sedimentation pattern in Talchir and Karharbari basins, and the abrupt change-over from glacio-marine to terrestrial fluviolacustrine depositional environment in terms of glacio-isostacy.     

Deformation behavior of migmatites: insights from microstructural analysis of a garnet–sillimanite–mullite–quartz–feldspar-bearing anatectic migmatite at Rampura–Agucha,Aravalli–Delhi Fold Belt,NW India

International Journal of Earth Sciences - In the present study we investigate the microstructural development in mullite, quartz and garnet in an anatectic migmatite hosted within a Grenvillian-age...     

Hydrogeochemical characteristics and its role in controlling arsenic mobilization in a shallow aquifer

The relevance of groundwater hydrogeochemistry to explain the occurrence and distribution of arsenic in groundwater is of great interest. The insightful discussions on the control of shallow groundwater (< 50 m) hydrogeochemistry in arsenic mobilization are known to be a viable tool to explain the arsenic menace in shallow groundwater. The present investigation emphasizes the hydrogeochemical driver and/or control over the reductive dissolution of Fe-bearing host minerals and thereby releasing arsenic into the shallow groundwater of the study area. The study suggests that hydrogeochemical evolution is mainly governed by carbonate minerals dissolution, silicate weathering, and competitive ion-exchange processes in the shallow aquifers (< 50 m). The present study also indicates the prevalence of carbonate minerals dissolution over silicate weathering. The emergence of Cl⁻ concentration in the shallow groundwater founds the possibilities of anthropogenic inputs into the shallow aquifers (< 50 m). The reducing environment in shallow aquifers (< 50 m) of the study area is evident in the reductive dissolution of Fe- bearing shallow aquifer minerals which absorb arsenic in the solid phase and mobilize arsenic onto shallow groundwater. The study opted for many statistical approaches to delineate the correlation among major and minor ionic constituents of the groundwater which are very helpful to understand the comprehensive mechanism of arsenic mobilization into shallow groundwater.

     

Geochemical signature of provenance in sand-size material in soils and stream sediments near the Tobacco Root batholith, Montana, U.S.A.

Trace-element geochemistry of sandstones are being used to determine provenance. We have conducted preliminary and limited experiments to determine to what extent daughter sands retain the geochemical signature of parent rocks. Six sets of first-order stream sediments, soils from adjacent slopes, and a variety of parent rocks were collected from southwestern Montana, U.S.A. Sampling in a low-relief area ensured that climate and residence time of soils on slopes could be eliminated as variables. Sand-size fractions of stream sediments and soils, and the corresponding parent rocks (granodiorite, quartz monzonite, granite gneiss, biotite-tonalite gneiss and amphibolite) were analyzed for most major elements and selected trace elements. Petrologic modal analysis of the parent rocks and the 0.25–0.50-mm fraction of each sand was done to monitor major mineralogic control, if any, on chemical compositions of the samples.

Our data show that the abundances of the Si and Al in sediments do not discriminate provenance. Abundances of Ca, Mg, Fe and Ti may broadly distinguish between sands derived from metamorphic and igneous source rocks, at least in the area studied. Differences in abundances of the Ba and Th, and the ratio of La/Lu between granitic, tonalitic and amphibolitic parent rocks are preserved in the daughter sediments that we studied. However, the size of the Eu anomaly in the REE patterns of different daughter sediments is not diagnostic of parent rocks. Abundances of Co and Sc distinguish between sediments derived from felsic and mafic rocks. A better provenance discrimination is obtained if the ratios La/Sc, Th/Sc, La/Co, Ba/Sc and Ba/Co are used.

Petrologic modal data show that mineral contents and chemical compositions of parent rocks are compatible with each other. The chemical composition of the sands may be roughly correlated to the petrological modal data but the abundances of some minor and trace elements of sediments cannot be inferred from modal mineralogy. This is expected because these elements may concentrate in accessory minerals and/or may weather out into aqueous or clay mineral fractions; it is also compatible with conclusions of previous studies that some of these elements do not reside in sand-size fractions of siliciclastic sediments.     

Flory-Huggins' formulation,its validity and implications in retrieval of equilibrium temperature of binary and ternary systems at higher pressures,using liquid silicate data and 1 bar liquidus temperature

For a pure phase at equilibrium with a polycomponent melt, two sets of expressions can be derived; one expressing its activity as a function of enthalpy, entropy, heat capacity and temperature, and the other by coupling a Flory-Huggins' polymerisation model with the van Laar heat of mixing term. Interaction parameters for binary and ternary systems have been computed at 1 bar by equating these two expressions. Assuming the interaction parameter to be independent of temperature, equilibrium temperatures at higher pressures can be calculated by an iterative procedure. Such retrieval calculations were carried out in simple eutectic, volatile-free systems like CaAl₂Si₂O₈-CaMgSi₂O₆, Mg₂SiO₄-TiO₂, MgSiO₃-TiO₂, Mg₂SiO₄-CaMgSi₂O₆, NaAlSi₃O₈-SiO₂ and CaAl₂Si₂O₈-CaMgSi₂O₆-Mg₂SiO₄. The close agreement between the theoretically retrieved and the experimentally determined equilibrium temperatures testifies to the validity of the model at higher pressures. The successful application of the model to simple eutectic, binary and ternary systems involving vastly dissimilar phases without imposing added constraints implies that it can be possibly extended to hitherto unknown systems provided the thermodynamic parameters of the phases involved are known.     

An analytical source function for a coupled hybrid wave model

An analytical form for the source function is formulated by comparing the fetch-limited approximation of the Ocean Wave Transport equation and the empirical equation for the fetch-dependent wave forecast nomograms. The source function thus generated has been utilised in the numerical model based on Toba’s formulation of wave transport equation and tested for the seas around the Indian subcontinent (5°S to 25°N latitude; 45°E to 100°E longitude). The grid averaged hindcast wave heights are found to be moderately matching with the GEOSAT altimeter measured significant wave heights of the 1987–1989 period, particularly for waves higher than 1 meter.