A numerical study on 2-D compressive wave propagation in rock masses with a set of joints along the radial direction normal to the joints

An explosion in a borehole or an accidental explosion in a tunnel will generate a two-dimensional (2-D) compressive wave that travels through the surrounding rock mass. For the problem of 2-D compressive wave propagation in a rock mass with parallel joints in the radial direction normal to the joints, parametric studies on the transmission ratio and the maximum rebound ratio are performed in universal distinct element code. The variation of the transmission ratio with the ratio of joint spacing to wavelength is generalized into a characteristic curve, which can be used as a prediction model for estimating the transmission ratio. The relationship between the maximum rebound ratio and the influence factors is obtained in charts. The charts can be used as a prediction model for estimating the maximum rebound ratio. The proposed prediction models for estimating the transmission ratio and the maximum rebound ratio are applied to a field explosion test, Mandai test in Singapore. The minimum possible values of peak particle velocity (PPV) at the monitoring points are estimated by using the proposed prediction model for estimating the transmission ratio along the radial direction normal to the joints. On the other hand, the maximum possible values of PPV are estimated by using the proposed prediction model for estimating the maximum rebound ratio along the same radial direction. The comparison shows a good agreement between the field-recorded PPVs and the estimated range of PPVs given by the minimum possible PPVs and the maximum possible PPVs at the monitoring points in Mandai test. The good agreement between the estimated and field-recorded values validates the proposed prediction models for estimating peak particle velocity in a rock mass with a set of joints due to application of a compressive wave at the boundary of a tunnel or a borehole.     

Evidence for discrete subpopulations of sea perch (Helicolenus ercoides) across four fjords in Fiordland,New Zealand

In coastal populations of invertebrates and fishes, the distribution of discrete subpopulations is influenced by adult and larval dispersal, as well as by the effects of habitat heterogeneity on site fidelity or connectivity. Here, we examine evidence for spatial structure of sea perch, Helicolenus percoides, populations among four fjords in the Fiordland region of southwestern New Zealand. We examine patterns in adult morphology, length-at-age, δ¹³C and δ¹⁵N of muscle tissue, and trace elemental composition of whole otoliths as proxies for population isolation among the four inner fjord regions. A multivariate analysis of morphometrics reveals significant differences among populations from each of the four sites, suggesting existence of four distinct subpopulations. These patterns are consistent with observed differences in δ¹³C and δ¹⁵N, and length-at-age estimates among the four subpopulations. Differences in whole otolith concentrations of Sr, Ba, Mg and Li, and high classification scores based on the whole otolith elemental fingerprint are also consistent with significant subdivision among areas. Patterns across all four markers are consistent with discrete subpopulation structure of adult sea perch among the four study sites. These data indicate that the newly implemented network of marine protected areas in Fiordland is likely to contain discrete populations of sea perch.     

Riverine dominance of a nearshore marine demersal food web: evidence from stable isotope and C/N ratio analysis

The Thukela Bank, KwaZulu-Natal, supports a diverse ecosystem and South Africa’s only prawn fishery. Oceanographic studies suggest riverine input is not important for the biology of this system, whereas biological studies suggest the contrary, with prawn catches increasing with increased fluvial run-off. The aim of this study was to determine (i) the importance of riverine and marine organic matter for the Thukela Bank food web; and (ii) whether there are seasonal changes in the Thukela River stable isotope values, and, if so, whether these are reflected in the isotope values of demersal organisms. Estuarine organic matter, sediments and demersal organisms were collected from several sites across the bank in the wet and dry seasons of 2008, 2009 and 2010. Marine particulate organic matter was also collected in 2010 and analysed for δ13C and δ15N, as well as C/N ratios. There were strong seasonal changes in isotopic values of organic matter and fauna, especially faunal δ13C. There was an apparent time-lag in organisms assimilating riverine organic matter isotopic values, with the isotopic signature of demersal organisms reflecting that of riverine organic matter from the previous season, which is likely the result of tissue turnover time. In 2010, Thukela Bank sediment organic matter was of riverine origin and this maintained the demersal food web. We conclude that Thukela River organic matter is an important input to the food web of the Thukela Bank, indicating that any future damming of the catchment area could have serious consequences for this ecosystem.     

The role of sea ice in coastal and bottom dynamics in the Pechora Sea

This article deals with the morpho- and lithodynamic role of ice in shaping the Arctic coasts. Taking the Pechora Sea as an example, the direct and indirect impact of ice on the sea floor and shores is described. Active gouging by ice floes, ice-rafting of sedimentary material, formation of strudel scour depressions and frozen rocks on shallows are all direct impacts. The indirect impact of ice that arrests the coastal zone for most of the year is a considerable reduction of the overall energy of waves and currents. Based on the performed analysis, we plot a schematic zonation of the Pechora Sea according to the probable impact of ice on the shores and seafloor.     

Diet and dietary variation of New Zealand hoki Macruronus novaezelandiae

The diet of hoki was determined from examination of stomach contents of 1992 fish of 26–112 cm total length (TL) sampled at depths of 209–904m on Chatham Rise, New Zealand, from summer research trawl surveys and seasonal commercial fishing trawls, during 2004–2008. Prey was predominantly euphausiids, mesopelagic fishes and natant decapods. Multivariate analyses using distance-based linear models, non-parametric multi-dimensional scaling and similarity percentages indicated that the best predictors of diet variability were the position of the fish in relation to the subtropical front (STF), fish size and longitude. Pasiphaeids were more important to the north of the STF, and sternoptychid fishes and euphausiids more important in the STF convergence area. Euphausiids and sternoptychid fishes were important for smaller hoki (26–55 cm TL), myctophid fishes and natant decapods for larger hoki, and macrourids for the largest hoki (>84 cm TL). The longitudinal effect was characterised by pasiphaeids, euphausiids and sternoptychids to the west, and myctophids in the centre of Chatham Rise. Feeding activity was analysed using generalised additive models, and was found to vary with time of day, sample source (research or commercial), longitude, hoki size and depth. The variability in diet suggested hoki forage opportunistically within their preferred habitat and biological limits.     

Epibiotic assemblages on the pen shell Pinna rudis (Bivalvia,Pinnidae) at Matiota Beach,São Vicente Island,Cabo Verde

The rough pen shell Pinna rudis Linnaeus, 1758 (family Pinnidae), a mollusc with an Atlantic–Mediterranean distribution, is able to live in coarse sandy substrates. Considering its shell structure and ecological characteristics, P. rudis can enhance biodiversity by providing a substrate for settlement on its shell. For this reason, we compared the diversity of benthic taxa around P. rudis shells with the species diversity on P. rudis shells, at Matiota Beach, São Vicente Island, Cabo Verde. We sampled an area of 900 m2 and recorded data in situ to estimate the population size of P. rudis and the epibiotic and benthic community diversity. The average density of P. rudis estimated in the sampled area was 6.6 ind. 100 m–2 and the highest density was found at between 2 and 3 m depth, mostly in biogenic and sandy substrates. The epibiotic species diversity on P. rudis shells was significantly higher than the species diversity in the microhabitat around the shells. The P. rudis shell seems to play an important role in increasing the biodiversity of the ecosystem, with some species found only as epibionts on P. rudis.     

Microfacies analysis and cyclostratigraphy of the upper cretaceous- lower paleogene succession of Bir Dakhl section,north eastern desert,Egypt

The Bir Dakhl section which is located in the southern Galala plateau, north eastern desert was sampled for microfacies analysis of the upper Cretaceous–lower Paleogene succession. Microfacies analysis led to the recognition of eight mixed clastic-carbonate facies types (black shale lithofacies MF-1, pure shale lithofacies MF-2, sandy shale lithofacies MF-3, marly shale lithofacies MF-4, mudstone microfacies MF-5, foraminiferal wackestone microfacies MF-6, bioclastic wackestone microfacies MF-7, and bioclastic packstone microfacies MF-8) of the studied interval. These microfacies can be grouped into three depositional environments: inner, middle and outer ramp. The interpreted depositional environments have been suggested to range from neritic to middle bathyal (~ 700 m). Based on cyclostratigraphy, five deepening upward cycles and three shallowing upward cycles have been differentiated in Bir Dakhl section.     

Volumetric soil profile modeling using geo-statistics and GIS: case study Kuwait Sabkha

Geo-statistics techniques showed high applicability in fields related to geotechnical engineering like mining and petroleum engineering. Hence, this paper introduces direct application of Geo-statistics in Geotechnical engineering which is 3D soil profiling. It introduces Geo-statistics as a concept and shows the practical implementation of these techniques on modeling soil profile using CPT sample data through the integration between GIS and a specialized 3D Geo-statistical modeling software called Sgems (Stanford Geo-statistical modeling software). Using 30 CPT logs in Sabkha soil from the data of Soil Works for a costal Housing Project located approximately 25 km west of Kuwait city, and a semi-automated workflow, the 3D model was produced on Sgems and converted to GIS. The ESRI-ArcGIS software was used in querying 3D soil profile and in producing 3D section in-spite of its limitation in 3D Voxel representation.