Implementing low-cost landslide risk reduction: a pilot study in unplanned housing areas of the Caribbean

Landslides pose a serious physical and environmental threat to vulnerable communities living in areas of unplanned housing on steep slopes in the Caribbean. Some of these communities have, in the past, had to be relocated, at costs of millions of dollars, because of major slides triggered by tropical storm rainfall. Even so, evidence shows that: (1) risk reduction is a marginal activity; (2) there has been minimal uptake of hazard maps and vulnerability assessments and (3) there is little on-the-ground delivery of construction for risk reduction. This article directly addresses these issues by developing a low-cost approach to the identification of the potential pore pressure changes that trigger such slides we seek to address these three commentaries directly. A complex 45–60° slope site in St Lucia, West Indies was selected as a pilot for a modelling approach that uses numerical models (FLAC and CHASM) to verify the need for surface water management to effectively reduce landslide risk. Following the model confirmation, a series of drains were designed and constructed at the site. Post-construction evidence indicates the methodology to be sound, in that the site was stable in subsequent 1-in-1 to 1-in-4 year rainfall events. A critical feature of the approach is that it is community-based from data acquisition through to community members participating in construction.     

Properties of structure and function of cadmium-binding proteins/peptides from Euglena gracilis

Euglena gracilis makes two small Cd-binding proteins/peptides (Cd-BP I and Cd-BP II) in response to exposure to Cd²⁺. These proteins migrate slower than mammalian Cd-metallothionein (Cd-Mt) through Sephadex G-75, but like Cd-Mt also contain Zn and are separated into two species when chromatographed over a DEAE column. Both BPs are much less stable than Cd-Mt under acidic conditions. One source of this instability is that at least Cd-BP II contains acid-labile sulfide co-ordinated to the metals. It has been quantitated in Cd-BP II and shown to have a value of 1·25 ± 0·10 S²⁻/Cd. The reactivity of the Cd-binding sites in ligand substitution and thioldisulfide exchange reactions has been assessed. The reactions of Cd-BP I and II with pyridylazoresorcinol (PAR) were slow and displayed complex kinetic behavior. Similarly, both Cd-BPs react slowly and with complicated kinetics with 5,5′-dithiobis-(2-nitrobenzoate).     

High resolution gravimetric geoid heights and gravimetric vertical deflections of Europe including marine areas

Gravimetric geoid heights and gravimetric vertical deflections have been detemined for Europe including the Mediterranean Sea, North Sea, Norwegian Sea, Baltic Sea and parts of the North Atlantic Ocean in a 12′×20′ grid. The computation has been carried out by least squares spectral combination using closed integral formulas, combining 104 000 mean free air gravity anomalies in 6′×10′ blocks, 12 000 mean free air gravity anomalies in 1⁰×1⁰ blocks and the sherical harmonic model GEM9. The precision of the computed geoid heights has been estimated to ±1 m, the precision of the computed vertical deflections has been estimated to ±2″. Comparisons of the gravimetric geoid heights and vertical deflections with a number of other solutions have been carried out, confirming the precision estimation.     

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.     

SCOPIX – digital processing of X-ray images for the enhancement of sedimentary structures in undisturbed core slabs

X-ray images of sediment core allow recognition of fine-scaled sedimentary structures which traditional epoxy casts or lacquer peels are unable to resolve. The X-ray imaging system SCOPIX has the additional advantage of acquiring high-resolution digital pictures suitable for further analysis by advanced image processing techniques. Because of the frequent presence of both physical and biogenic sedimentary structures in undisturbed sediment cores, two image analysis procedures have been established which simplify the information contained in the images (in term of structures and facies), and allow a quantitative characterization of the observed structures. This form of parametrization of the image structure constitutes an additional source of information for a better interpretation of the physical processes responsible for the generation of the sedimentary structures.     

Seasonal methyltin and (3-dimethylsulphonio)propionate concentrations in leaf tissue of Spartina alterniflora of the Great Bay estuary (NH)

Concentrations of total recoverable inorganic tin (TRISn), monomethyltin (MeSn³⁺), dimethyltin (Me₂Sn²⁺), trimethyltin (Me₃Sn⁺) and (3-dimethylsulphonio)propionate (DMSP) were determined in leaves of Spartina alterniflora from three sites in the Great Bay estuary (NH) from 8 May to 15 September 1989. Total methyltin concentration increased from 8·9 ng g⁻¹ (fresh weight) on 8 May to 472 ng g⁻¹ on 23 May, decreased to 52 ng g⁻¹ on 7 June and 16ng g⁻¹ on 20 June, and remained low until the last sample on 18 September. Statistical calculations showed that methyltin concentrations varied significantly with sampling week, but not with site. DMSP concentrations showed very different behaviour. During the same sampling period DMSP concentrations varied only from 7·5 to 26 μmol g⁻¹ (fresh weight). DMSP concentrations varied significantly for site, but not sampling week.     

Nutrient budgets and trophic state in a hypersaline coastal lagoon: Lagoa de Araruama, Brazil

Lagoa de Araruama in the state of Rio de Janeiro, Brazil, is a hypersaline lagoon with salinity varying spatially from 45 to 56. We collected water samples during monthly cruises throughout the lagoon, and along the streams feeding the system, from April 1991 to March 1992. Nutrients and other water quality parameters exhibited great spatial and temporal variations. Mass balance calculations indicate large amounts of anthropogenic nutrient inputs. The data indicate that the lagoon currently is oligotrophic but is in a state of transition to become a mesotrophic system. Molar dissolved inorganic nitrogen:dissolved inorganic phosphorus (DIN/DIP) varied between 2.2:1 and 659:1 with a volume-weighted average of 22:1. The high DIN/DIP ratio contrasts with that found in nearby lagoons, suggesting that phytoplankton primary production is limited by phosphorus in Lagoa de Araruama. The major loss of DIP is apparently driven by biological assimilation and diagenic reactions in the sediments. Calculations indicate that the lagoon is slightly net autotrophic at +0.9 mol C m⁻² yr⁻¹. This suggests that the biomass of the primary producers is restricted by phosphorus availability. Phosphorus retention in the sediment and the hypersaline state of the lagoon prevent changes in autotrophic communities and the formation of eutrophic conditions.     

Formation of the mid-fifteenth century Kuwae caldera (Vanuatu) by an initial hydroclastic and subsequent ignimbritic eruption

In the mid-fifteenth century, one of the largest eruptions of the last 10 000 years occurred in the Central New Hebrides arc, forming the Kuwae caldera (12x6 km). This eruption followed a late maar phase in the pre-caldera edifice, responsible for a series of alternating hydromagmatic deposits and airfall lapilli layers. Tuffs related to caldera formation ( 120 m of deposits on a composite section from the caldera wall) were emitted during two main ignimbritic phases associated with two additional hydromagmatic episodes. The lower hydromagmatic tuffs from the precaldera maar phase are mainly basaltic andesite in composition, but clasts show compositions ranging from 48 to 60% SiO₂. The unwelded and welded ashflow deposits from the ignimbritic phases and the associated intermediate and upper hydromagmatic deposits also show a wide compositional range (60–73% SiO₂), but are dominantly dacitic. This broad compositional range is thought to be due to crystal fractionation. The striking evolution from one eruptive style (hydromagmatic) to the other (magmatic with emission of a large volume of ignimbrites) which occurred either over the tuff series as a whole, or at the beginning of each ignimbritic phase, is the most impressive characteristic of the caldera-forming event. This strongly suggests triggering of the main eruptive phases by magma-water interaction. A three-step model of caldera formation is presented: (1) moderate hydromagmatic (sequences HD 1–4) and magmatic (fallout deposits) activity from a central vent, probably over a period of months or years, affected an area slightly wider than the present caldera. At the end of this stage, intense seismic activity and extrusion of differentiated magma outside the caldera area occurred; (2) unhomogenized dacite was released during a hydromagmatic episode (HD 5). This was immediately followed by two major pyroclastic flows (PFD 1 and 2). The vents spread and intense magma-water interaction at the beginning of this stage decreased rapidly as magma discharge increased. Subsequent collapse of the caldera probably commenced in the southeastern sector of the caldera; (3) dacitic welded tuffs were emplaced during a second main phase (WFD 1–5). At the beginning of this phase, magma-water interaction continued, producing typical hydromagmatic deposits (HD 6). Caldera collapse extended to the northern part of the caldera. Previous C¹⁴ dates and records of explosive volcanism in ice from the south Pole show that the climactic phase of this event occurred in 1452 A.D.     

Coupling an ocean wave model to an atmospheric general circulation model

A coupled model, consisting of an ocean wave model and an atmospheric general circulation model (AGCM), is integrated under permanent July conditions. The wave model is forced by the AGCM wind stress, whereas the wind waves modify the AGCM surface fluxes of momentum, sensible and latent heat. We investigate the following aspects of the coupled model: how realistic are the wave fields, how strong is the coupling, and how sensitive is the atmospheric circulation to the spatially and temporally varying wave field. The wave climatology of the coupled model compares favorably with observational data. The interaction between the two models is largest (although weak) in the storm track in the Southern Hemisphere. Young windsea, which is associated with enhanced surface fluxes is generated mostly in the equatorward frontal area of an individual cyclone. However, the enhancement of the surface fluxes is too small to significantly modify the climatological mean atmospheric circulation.This paper was presented at the Second International Conference on Modelling of Global Climate Variability, held in Hamburg 7–11 September 1992 under the auspices of the Max Planck Institute for Meteorology. Guest Editor for these papers is L. Dümenil     

An upper limit on the aperture separation of ion drift meters

An upper limit has been calculated on the effective aperture separation or detector thickness of ion drift meters of two fundamental types. The limit applies to meters which compare currents collected by detectors with different view directions at the same retarding potential and to meters which measure the entire thermal ion distribution function. For both types, a single scanned detector may be employed instead of multiple detectors, in which case the limit applies to twice the radius of curvature of the path followed by the detector aperture during a scan, (i.e. the diameter of a spinning payload). The limit was found to be important in two cases. First, in the F region on spacecraft with stringent electrostatic cleanliness requirements, the 10% error limit was found to be 40 cm. Second, in the E region, the limit was found to be 1 cm.Originally submitted to the journalSpace Science Instrumentation.Deceased.