Stability of the periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions

The periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions are well known (Kurcheeva, 1973). Here the stability of these solutions are examined by applying Poncaré's characteristic equation for periodic solutions. It is found that the isoperiodic solutions are stable and all other solutions are unstable.     

National ocean policy—new opportunities for Malaysian ocean development

Being a littoral state, Malaysian maritime sectors provide the basis for the growth and development of marine-related activities. As the country enters the new millennium along with the ‘2020 Vision’ which serves as the basic template against which the economic performance of these sectors should be judged, it poses a new challenge for Malaysia in developing these sectors. This paper attempts to address three basic issues: Firstly, is there any national ocean policy in place? Secondly, are the maritime sectors adequately organized to play an important role in achieving the objectives? Thirdly, what are the opportunities available in developing the ocean?It can be seen that existing policies to develop comprehensive ocean governance have not received the full attention they deserve. Organizational structures governing the ocean for implementing national policies are well in place but in a fragmented and uncoordinated fashion. As a result, sectoral and intersectoral management problems were created such as multiple-use conflicts, overlapping of jurisdiction and duplication of efforts. Environmental problems have also not been properly addressed. A few sectors have been identified as offering opportunities to further develop the Malaysian maritime areas. Among these are marine education and human resources development, marine tourism and the seafood industry.     

Crustal xenoliths from Calbuco Volcano,Andean Southern Volcanic Zone: implications for crustal composition and magma-crust interaction

Crustal xenoliths in the 1961 andesite flow of Calbuco Volcano, in the southern Southern Volcanic Zone (SSVZ) of the Andes, consist predominantly of pyroxene granulites and hornblende gabbronorites. The granulites contain plagioclase+pyroxene+magnetite±amphibole, and have pronounced granoblastic textures. Small amounts of relict amphibole surrounded by pyroxene-plagioclase-magnetite-glass symplectites are found in some specimens. These and similar textures in the gabbronorites are interpreted as evidence of dehydration melting. Mineral and bulk rock geochemical data indicate that the granulites are derived from an incompatible trace element depleted basaltic protolith that underwent two stages of metamorphism: a moderate pressure, high temperature stage accompanied by melting and melt extraction from some samples, followed by thermal metamorphism after entrainment in the Calbuco andesite lavas. High _Nd ^T values (+4.0 to +8.6), Nd-isotope model ages of 1.7–2.0 Ga, and trace element characteristics like chondrite normalized La/Yb< and La/Nb1 indicate that the protoliths were oceanic basalts. Similar oceanic metabasalts of greenschist to amphibolite facies are found in the Paleozoic metamorphic belt that underlies the Chilean coastal ranges. Mineral and bulk rock compositions of the gabbronorite xenoliths indicate that they are cognate, crystallizing from the basaltic andesite magma at Calbuco. Crystallization pressures for the gabbros based on total Al contents in amphibole are 6–8 kbar. These pressures point to middle to lower crustal storage of the Calbuco magma. Neither granulite nor gabbro xenoliths have the appropriate geochemical characteristics to be contaminants of Calbuco andesites, although an ancient sedimentary contaminant is indicated by the lava compositions. The presence of oceanic metabasaltic xenoliths, together with the sedimentary isotopic imprint, suggests that the lower crust beneath the volcano is analogous to the coastal metamorphic belt, which is an accretionary complex of intercalated basalts and sediments that formed along the Paleozoic Gondwanan margin. If this is the case, the geochemical composition of the lower and middle crust beneath the SSVZ is significantly different from that of most recent SSVZ volcanic rocks.     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Evaluation of the fishery status for King Soldier Bream Argyrops spinifer in Pakistan using the software CEDA and ASPIC

Catch and effort data were analyzed to estimate the maximum sustainable yield(MSY) of King Soldier Bream, Argyrops spinifer(Forssk?l, 1775, Family: Sparidae), and to evaluate the present status of the fish stocks exploited in Pakistani waters. The catch and effort data for the 25-years period 1985–2009 were analyzed using two computer software packages, CEDA(catch and effort data analysis) and ASPIC(a surplus production model incorporating covariates). The maximum catch of 3 458 t was observed in 1988 and the minimum catch of 1 324 t in 2005, while the average annual catch of A. spinifer over the 25 years was 2 500 t. The surplus production models of Fox, Schaefer, and Pella Tomlinson under three error assumptions of normal, log-normal and gamma are in the CEDA package and the two surplus models of Fox and logistic are in the ASPIC package. In CEDA, the MSY was estimated by applying the initial proportion(IP) of 0.8, because the starting catch was approximately 80% of the maximum catch. Except for gamma, because gamma showed maximization failures, the estimated results of MSY using CEDA with the Fox surplus production model and two error assumptions, were 1 692.08 t(R 2 =0.572) and 1 694.09 t( R 2 =0.606), respectively, and from the Schaefer and the Pella Tomlinson models with two error assumptions were 2 390.95 t( R 2 =0.563), and 2 380.06 t( R 2 =0.605), respectively. The MSY estimated by the Fox model was conservatively compared to the Schaefer and Pella Tomlinson models. The MSY values from Schaefer and Pella Tomlinson models were the same. The computed values of MSY using the ASPIC computer software program with the two surplus production models of Fox and logistic were 1 498 t(R 2 =0.917), and 2 488 t( R 2 =0.897) respectively. The estimated values of MSY using CEDA were about 1 700–2 400 t and the values from ASPIC were 1 500–2 500 t. The estimates output by the CEDA and the ASPIC packages indicate that the stock is overfished, and needs some effective management to reduce the fishing effort of the species in Pakistani waters.     

A Novel Multiple-Kernel Support Vector Regression Algorithm for Estimation of Water Quality Parameters

Natural Resources Research - The quality of&nbsp;surface&nbsp;waters plays a key role in the sustainability of ecological systems. Measuring water quality parameters (WQPs) is of high...     

Spatiotemporal changes in precipitation concentration over Iran during 1962–2019

Climatic Change - Changes in precipitation pattern can lead to widespread impacts across natural and human systems. This study assesses precipitation variability as well as anthropogenic and...     

Bidirectional behavior of unreinforced masonry walls

Most of the studies related to the modeling of masonry structures have by far investigated either the in‐plane (IP) or the out‐of‐plane (OP) behavior of walls. However, seismic loads mostly impose simultaneous IP and OP demands on load‐bearing or shear masonry walls. Thus, there is a need to reconsider design equations of unreinforced masonry walls by taking into account bidirectional effects. The intent of this study is to investigate the bidirectional behavior of an unreinforced masonry wall with a typical aspect ratio under different displacement‐controlled loading directions making use of finite element analysis. For this purpose, the numerical procedure is first validated against the results of the tests on walls with different failure modes conducted by the authors. Afterward, the response of the wall systems is evaluated with increasing top displacement having different orientations. A set of 19 monotonic and three cyclic loading analyses are performed, and the results are discussed in terms of the variation of failure modes and load–displacement diagrams. Moreover, the results of wall capacity in each loading condition are compared with those of the ASCE41‐06 formulations. The results indicate that the direction of the resultant force, vectorial summation of IP and OP forces, of the wall is initially proportional to the ratio of stiffness in the IP and the OP directions. However, with the increase of damage, the resultant force direction inclines towards the wall's longitudinal direction regardless of the direction of the imposed displacement. Finally, recommendations are made for applicability of ASCE41‐06 formulations under different bidirectional loading conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol‐qeshlaghi Area,NW Iran: Constrains on REEs

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regard...     

Impact of lateral force-resisting system and design/construction practices on seismic performance and cost of tall buildings in Dubai, UAE

The local design and construction practices in the United Arab Emirates(UAE),together with Dubai’s unique rate of development,warrant special attention to the selection of Lateral Force-Resisting Systems(LFRS).This research proposes four different feasible solutions for the selection of the LFRS for tall buildings and quantifies the impact of these selections on seismic performance and cost.The systems considered are: Steel Special Moment-Resisting Frame(SMRF),Concrete SMRF,Steel Dual System(SMRF with Special Steel Plates Shear Wall,SPSW),and Concrete Dual System(SMRF with Special Concrete Shear Wall,SCSW).The LFRS selection is driven by seismic setup as well as the adopted design and construction practices in Dubai.It is found that the concrete design alternatives are consistently less expensive than their steel counterparts.The steel dual system is expected to have the least damage based on its relatively lesser interstory drifts.However,this preferred performance comes at a higher initial construction cost.Conversely,the steel SMRF system is expected to have the most damage and associated repair cost due to its excessive flexibility.The two concrete alternatives are expected to have relatively moderate damage and repair costs in addition to their lesser initial construction cost.