从统计分析看控制东海重矿物分布的因素

任何地质作用过程都是复杂的,东海也不例外,其沉积过程具有长期性、继承性和叠加性的特点.因而反映在矿物组合及其分布变化上较为复杂,影响因素颇多.然而,运用数学地质方法却可帮助我们寻找和确定其主要的影响因素,查明它们的相互关系,甚至建立定量描述的模式.而这正是传统地质学研究中的难题之一.     

Interfacial geochemistry of barium in suspension and sediment from Zhujiang Estuary

Chemical forms of Ba are determined in samples of suspension and sediment from the Zhujiang Estuary. Their interfacial geochemical processes are discussed. Total suspended Ba content is between 2. 4 and 40. 4 μg/L, and mostly exists in the crystalline form (43. 5%), secondly in the Fe-Mn oxidative form (23.1%). Percentages of organic, carbonate and exchangeable forms are 14. 8%, 11. l%and 7.4%, respectively. Total content of Ba in the sediment is between 158. 6 and 48. 0 ug/g. Percentages of crystalline form, Fe-Mn oxidative form and carbonate form are 78. 4% ,13. 5%and 8. 2%, respectively. Organic and exchangeable forms are not detected. The study on the mechanism of interfacial movement suggests that the salinity range of 10 is the turning point for the varied distribution of Ba. The subsidence of crystalline form affects the decrease of Ba content in suspension. The decrease mostly takes place in the salinity range lower than 10, which corresponds to the high value of Ba content in the sediment. The     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.     

SHRIMP U-Pb zircon age,geochemistry and Nd isotope of the Guandaoshan pluton in SW Sichuan: Petrogenesis and tectonic significance

SHRIMP U-Pb zircon age, geochemical and Nd isotopic data are reported for the Neo-proterozoic Guandaoshan pluton in the Yanbian region, SW Sichuan. This pluton is of typical I-type granite and emplaced at (857 ± 13) Ma. Geochemical and Nd isotopic characters suggest that the pluton was generated by partial melting of pre-existing, young (late Mesoproterozoic to early Neo-proterozoic) low-K tholeiitic protolith within an intraplate anorogenic setting. The Guandaoshan pluton probably records the earliest magmatism induced by the proposed ca. 860–750 Ma mantle superplume beneath the supercontinent Rodinia.     

水库地震主震发生时间的预测

水利工程对水库地震的抗震设防要求事先对水为地震进行预测。预测内容包括蓄水后诱发地震的危险性（可能性、）最大震级、最大震的地占紧及不库地震对场址地震动参数的影响。除主震时间的预测外，本文第一作者都曾提出过初步的预测方法。本文认为，水库地震前震波速比异常、非线性灰色模型以及前震系列回归等方法，是预测主震时间的有前途的方法。     

Byproduct Formation During the Reduction of TCE by Zero-Valence Iron and Palladized Iron

Trichloroethene (TCE) was reduced with zero-valence iron and palladized iron in zero-head-space extractors. Progress of the reaction in these batch studies was monitored with purge-and-trap gas chromatography and a flame ionization detector. When a 5 ppm initial concentration of TCF. reacts with zero-valence iron, approximately 140 ppb of vinyl chloride persists for as long as 73 days. The concentration of vinyl chloride (approximately If) ppb) remaining with palladized iron is approximately an order of magnitude less than when zero-valence iron is the reductant. These data suggest that volatile byproducts may be under-represented in oilier published data regarding reduction with zero-valence metals. These results also demonstrate that the reduction of TCE with palladized iron (0.05 percent palladium) is more than an order of magnitude faster than with zero-valence iron. Wilh a 5:1 solution-to-solid ratio the TCE half-life with zero-valence iron is 7.41 hours. but is only 0.59 hours with the palladized iron.     

网络环境下地震科技信息工作的思考

进入21世纪以来,信息技术得到飞速发展,使得信息获取途径日益呈现出多元化特性,强烈地冲击了传统的地震科技信息工作依赖馆藏文献提供为主的信息管理和服务模式.同时也更凸显了地震科技信息工作在信息开发利用与服务上的种种缺陷.变革中的社会信息环境,迫使我们重新审视和思考网络环境下地震科技信息管理与服务等诸多问题,加强地震科技信息工作创新的研究与思考.