Surface effects of triggered fault slip on Reykjanes Peninsula, SW Iceland

Three large earthquakes (M_w>4.5) were triggered within 5 min, 85 km west of a M_w 6.5 earthquake in the South Iceland Seismic Zone (SISZ). We report on surface effects of these triggered earthquakes, which include fresh rupture, widespread rockfall, disrupted rockslides and block slides. Field data confirm that the earthquakes occurred along N-striking right-lateral strike-slip faults. Field data also support the conclusion from modeling of InSAR data that deformation from the second triggered event was more significant than for the other two. A major hydrological effect was the draining of water through an open fissure on a lake bed, lowering the lake level by greater than 4 m. Field relationships suggest that a component of aseismic slip could have been facilitated by water draining into the fault zone.     

Ecophysiology of the saguaro cactus (Carnegiea gigantea) in the Saguaro National Monument: relationship to symptoms of decline

The purpose of this study was to examine physiological correlates to the phenomenon of epidermal browning and saguaro decline in Saguaro National Monument. Gas exchange characteristics, surface temperatures, and the extent of epidermal browning in tissues of both healthy and declining saguaro cacti (Carnegiea gigantea) at different solar orientations were examined in eight long-term monitoring plots in the Rincon Mountain District of the Saguaro National Monument near Tucson, Arizona during both wet and dry seasons and years.Daily maximum surface temperatures were greatest on west-oriented tissues, as predicted by a simple model. However, south- and south-west-oriented tissues showed the highest browning indices, suggesting that browning may be more related to cumulative thermal loading than to extreme late afternoon temperature events. During the wet season, maximum nocturnal CO₂uptake rates and total nocturnal CO₂uptake were negatively correlated with browning index. Uptake rates during dry seasons and dry years was minimal, and not related to browning indices. However, healthy tissues of saguaros that also had tissues with high browning indices had wet-season maximum CO₂uptake rates as high as saguaros without damaged tissues, suggesting that the browning is not systemic but rather is tissue- and angle-specific. Instantaneous measures of water-use efficiency did not vary significantly or predictably by angle, but rather were greatest during night-time and in tissues when CO₂uptake was greatest. We suggest that browning symptoms on cacti are most likely due to natural abiotic stress, and are unrelated to systemic pollution stress or increased UV-B radiation.     

Greenhouse Gas Emissions and Costs over the Life Cycle of Wood and Alternative Flooring Materials

Increased use of wood can substitute more energy demanding products and thus contribute to a long-term solution to the global warming problem. The aim of this article is to provide an empirical study on this substitution impact, its cost-effectiveness, and which methodological assumptions that are of highest importance for the results obtained. We have made a case study where we compare use of various flooring materials. The results show that floor covering in solid oak causes lower greenhouse gas (GHG) emissions than the other materials. The difference can be ranked in the following order, after their potential for reduction in GHG emissions: Carpet in wool, carpet in polyamide, vinyl, and linoleum. At 2% pro anno discount rate, the avoided GHG emission in tons per m³ of oak flooring used is 0.1–1.9 for linoleum, and 11.8–15.5 for wool carpets. Unless the solution in solid oak is on total less expensive over the lifetime of the building, only the price of avoided emissions from a substitution between solid oak and carpet in wool is reasonable, compared to present carbon fees. The assumptions that influence the result most are choice of discount rate, carbon fixation on forest area, and waste handling. Empirical case studies like this indicate GHG emission reduction potentials caused by substitution, but should be complemented by dynamic input/output analyses and econometric studies. To analyse the flow of CO₂ over time, they should also be linked to forest management models.     

Arsenic mobility in alteration products of sulfide-rich, arsenopyrite-bearing mine wastes, Snow Lake, Manitoba, Canada

The Arsenopyrite Residue Stockpile (ARS) in Snow Lake, Manitoba contains approximately 250,000 tons of cyanide treated, refractory arsenopyrite ore concentrate. The residue was deposited between 1950 and 1959 in an open waste rock impoundment, and remained exposed until 2000, when the pile was capped with layers of waste rock and clay. During the time when the ARS was exposed to the atmosphere, arsenopyrite, pyrrhotite, pyrite and chalcopyrite were oxidized producing scorodite, jarosite and two generations of amorphous Fe sulfo-arsenates (AISA). These secondary phases attenuated some of the As released to pore water during oxidation in the upper layers of the ARS. The imposition of the cap prevented further oxidation. The secondary As minerals are not stable in the reduced environment that currently dominates the pile. Therefore, As currently is being released into the groundwater. Water in an adjacent monitoring well has concentrations of >20 mg/L total As with relative predominance of As(III).     

Early Cenomanian cephalopods from the Grayson Formation of north-central Texas

Twenty-seven species of cephalopods are identified from an exposure of the Grayson Formation, Washita Group at the Waco Dam Spillway, McLennan County, north-central Texas. Mariella (Mariella) camachoensis (Böse), (?)Stomohamites sp., Engonoceras serpentinum (Cragin), Puzosia cf. crebrisulcata Kossmat, Mantelliceras cf. cantianum Spath, Mantelliceras saxbii (Sharpe), Sharpeiceras mexicanum (Böse), (?)Paracalycoceras sp., and Neohibolites sp. are reported from the Grayson Formation for the first time. The occurrence of Mantelliceras cf. cantianum, Mantelliceras saxbii, Sharpeiceras mexicanum, and (?)Paracalycoceras sp. indicates an early Cenomanian age for the Grayson exposed at the Waco Spillway locality. Previously, these mantellicerid ammonites have been recorded from the Buda Limestone interval which overlies the Grayson in north-central Texas.     

Converted-wave imaging in anisotropic media: theory and case studies

Common‐conversion‐point binning associated with converted‐wave (C‐wave) processing complicates the task of parameter estimation, especially in anisotropic media. To overcome this problem, we derive new expressions for converted‐wave prestack time migration (PSTM) in anisotropic media and illustrate their applications using both 2D and 3D data examples. The converted‐wave kinematic response in inhomogeneous media with vertical transverse isotropy is separated into two parts: the response in horizontally layered vertical transverse isotrophy media and the response from a point‐scatterer. The former controls the stacking process and the latter controls the process of PSTM. The C‐wave traveltime in horizontally layered vertical transverse isotrophy media is determined by four parameters: the C‐wave stacking velocity V_C2, the vertical and effective velocity ratios γ₀ and γ_eff, and the C‐wave anisotropic parameter χ_eff. These four parameters are referred to as the C‐wave stacking velocity model. In contrast, the C‐wave diffraction time from a point‐scatterer is determined by five parameters: γ₀, V_P2, V_S2, η_eff and ζ_eff, where η_eff and ζ_eff are, respectively, the P‐ and S‐wave anisotropic parameters, and V_P2 and V_S2 are the corresponding stacking velocities. V_P2, V_S2, η_eff and ζ_eff are referred to as the C‐wave PSTM velocity model. There is a one‐to‐one analytical link between the stacking velocity model and the PSTM velocity model. There is also a simple analytical link between the C‐wave stacking velocities V_C2 and the migration velocity V_Cmig, which is in turn linked to V_P2 and V_S2. Based on the above, we have developed an interactive processing scheme to build the stacking and PSTM velocity models and to perform 2D and 3D C‐wave anisotropic PSTM. Real data applications show that the PSTM scheme substantially improves the quality of C‐wave imaging compared with the dip‐moveout scheme, and these improvements have been confirmed by drilling.     

Natural Gas Hazard (CO2, 222 Rn) within a Quiescent Volcanic Region and Its Relations with Tectonics: The Case of the Ciampino-Marino Area, Alban Hills Volcano, Italy

Groundwater surveys were performed by detailed(around 300 sites) grid-analysis of water temperature, pH, redox potential, electrical conductivity, ²²²Rn, alkalinity and by calculating the pCO₂, throughout the Ciampino and Marino towns in the Alban Hills quiescent volcano (Central Italy). Following several episodes of dangerous CO₂ exhalation from soils during the last 20 years and earlier ashistorically recorded, the work aimed at assessing the Natural Gas Hazard (NGH) including the indoor-Rn hazard. The NGH was defined as the probability of an area to become a site of poisonous peri-volcanic gas exhalations from soils to the lower atmosphere (comprising buildings). CO₂ was found to be a ``carrier' for the other poisonous minor and in trace components (H<sub>s</sub>S, CH<sub>4</sub>, <sup>222</sup>Rn, etc.). This assessment was performed by extrapolating in the aquifer CO<sub>2</sub> and <sup>222</sup>Rn conditions, and discriminating sectors where future CO<sub>2</sub> flux in soils as well as indoor-Rn measurements have to be noted. A preliminary indoor-Rn survey was performed at about 200 sites. The highest values were found in the highest pCO<sub>2</sub> and high <sup>222</sup>Rn values in groundwater. This indicates convection and enhanced permeability in certain sectors of the main aquifer, i.e., along the bordering faults and inside the gas-trap of the Ciampino Horst., where ``continuous gas-phase micro-macro seepage mechanism' is invoked to explain the high peri-volcanic gases flux.     

A numerical simulation of residual circulation in Tampa Bay. Part I: Low-frequency temporal variations

The residual (time-average) salinity and circulation in a numerical ocean model of the Tampa Bay estuary are shown to experience significant temporal variation under realistic forcing conditions. A version of the Estuarine Coastal Ocean Model developed for Tampa Bay with 70 by 100 horizontal grid points and 11 sigma levels is examined for the years 2001–2003. Model output variables are averaged over the entire time of the simulation to generate long-term residual fields. The residual axial current is found to be dominated by the buoyancy-driven baroclinic circulation with an outflow (southwestward) at the surface and to the sides of the shipping channel, and an inflow (northeastward) usually occurring subsurface within or above the shipping channel. Averages over 30 d are used to examine variations in the residual fields. During the simulation the average surface salinity near the head of Tampa Bay varies with the freshwater inflow, from 12‰ to 33%. At the bay mouth salinity varies from 30%. to 36%.. A localized measure of the baroclinic circulation in the shipping channel indicates the residual circulation can vary strongly, attaining a magnitude triple the long-term mean value. The baroclinic circulation can be disrupted, going to near zero or even reversing, when the buoyancy-driven flow is weak and the surface winds are to the northeast. Three time periods, representing different environmental conditions, are chosen to examine these results in detail. A scaling argument indicates the relative strength of buoyancy versus wind as ΔρgH²(LC _Dω²)⁻¹, where δρ is head-to-mouth density difference across the bay,g is gravitational acceleration,H is depth,L is bay length,C _D is the surface wind drag coefficient, andw is wind speed. Tampa Bay is usually in the buoyancy dominated regime. The importance of winds in the weak-buoyancy case is demonstrated in an additional simulation without wind stress.     

Space orientation and geodetic azimuths of long lines from observations of the ANNA Satellite

The space orientation and geodetic azimuths of lines ranging from 300 km to 1400 km have been determined from simultaneous optical observations of the ANNA Flashing Satellite. The results of this test prove that the azimuth and the space direction between two stations can be achieved to an accuracy of 0.5″ and 0.8″ second respectively with only a limited amount of data. The reason for the high accuracy is attributed to two factors: [1] the metric quality of the PC-1000's stellar cameras, and [2] the “perfect” simultaneity in the observations provided by the ANNA flashing light. Much of this work was accomplished by the writer while employed by the Geodesy and Gravity Branch of Cambridge Research Laboratories.