Shine the dark ages

Recent WMAP results indicate quite early reionization of the universe. Here we discuss possible implications on CMB anisotropies and CMB polarization of the early reionization.     

Palaeomagnetism of the Tudor gabbro, Ontario: evidence for divergence between Grenvillia and interior Laurentia

Summary. After thermal and alternating field (AF) cleaning, the characteristic high blocking temperature A component of natural remanent magnetization (NRM) of the Tudor gabbro of southern Ontario has a mean direction D = 326°, I =–46° ( k = 132, α₉₅= 4.8°, N = 8 sites). The corresponding palaeopole, 133°E, 12°N ( dp = 4°, dm = 6°), confirms the palaeopole 137°E, 17°N (α₉₅= 8.4°) reported earlier by Palmer & Carmichael, based on AF cleaning only. The A NRM has unblocking temperatures > 515–525°C which exceed the estimated 500°C peak temperature reached locally during ∼ 1050 Ma Grenvillian regional metamorphism. The A NRM therefore predates metamorphism and is probably a primary thermoremanence (TRM). The age of the Tudor NRM has previously been taken to be about 675 Ma, but recent ⁴⁰Ar/³⁹Ar dating by Baksi has shown that this is the time of post-metamorphic cooling to 200–250°C. Hornblendes record initial cooling of the intrusion to 590±20°C at 1110 Ma and this is the best estimate of the age of the A remanence. Successful Thellier-type palaeointensity determinations on 11 Tudor samples confirm that the A NRM is a TRM and indicate a palaeofield at this time of 18–27 μT, about 50–70 per cent of the present field intensity at 27° magnetic latitude. The anomalous Tudor A palaeopole, which lies well to the west of both 1000–800 Ma Grenvillian palaeopoles and 1100–1050 Ma poles from Interior Laurentia, is interpreted as recording divergence between Grenvillia and Interior Laurentia just before the Grenvillian orogeny, rather than a post-metamorphic extension of the apparent polar wander path as previously assumed.     

Direct determination of barium in Sea water by inductively coupled plasma emission spectrometry

A method for the determination of barium in sea water was investigated using inductively coupled plasma emission spectrometry, and sea water samples from the Japan Sea and the Pacific Ocean were directly analyzed by this method. Artificial sea water was used to prepare matrix matched standard solutions to overcome the problem of physical interference. The detection limit (signal/noise ratio=2) for barium in deionized and distilled water was 0.08µg l^?1 and in sea water, 0.12µg l^?1. The reproducibilities in the purified water and in the sea water at the 10µg l^?1 level were 0.7% a#FFFFFFnd 0.5%, respectively. The barium concentration in both the Japan Sea and the Pacific Ocean increased with depth and ranged between 5.5–10.0µg l^?1 and 4.1–18.4µg l^?1, respectively.     

Laser probe Ar/Ar dating: History and development from a technical perspective

The ⁴⁰Ar/³⁹Ar method using a laser probe opened the door to microscale measurements and diffusion profiles frozen in samples. In the first decade since the initial application of a laser for ⁴⁰Ar/³⁹Ar dating in 1973, practical applications have been few. This is due not only to the fact that the laser and vacuum technologies were immature but that mass spectrometry was also in its infancy. In those days, the sensitivity of a mass spectrometer was generally insufficient to measure the small amount of argon degassed from a geological sample by a laser. These problems have subsequently been solved by new technologies. To understand their current status, a brief history of their development is outlined. This outline focuses on the required detection limit in micro scale measurement, practical approaches for accurate measurement are explained through examples in our laboratory specifically relating to the technical aspects of ⁴⁰Ar/³⁹Ar dating.     

Cretaceous isochron ages from K–Ar and Ar / Ar dating of eclogitic rocks in the Tso Morari Complex, western Himalaya, India

The Tso Morari Complex, which is thought to be originally the margin of the Indian continent, is composed of pelitic gneisses and schists including mafic rock lenses (eclogites and basic schists). Eclogites studied here have the mineral assemblage Grt + Omp + Ca-Amp + Zo + Phn + Pg + Qtz + Rt. They also have coesite pseudomorph in garnet and quartz rods in omphacite, suggesting a record of ultrahigh-pressure metamorphism. They occur only in the cores of meter-scale mafic rock lenses intercalated with the pelitic schists. Small mafic lenses and the rim parts of large lenses have been strongly deformed to form the foliation parallel to that of the pelitic schists and show the mineral assemblages of upper greenschist to amphibolite facies metamorphism. The garnet–omphacite thermometry and the univariant reaction relations for jadeite formation give 13–21 kbar at 600 °C and 16–18 kbar at 750 °C for the eclogite formation using the jadeite content of clinopyroxene (X_Jd = 0.48).

Phengites in pelitic schists show variable Si / Al and Na / K ratios among grains as well as within single grains, and give K–Ar ages of 50–87 Ma. The pelitic schist with paragonite and phengite yielded K–Ar ages of 83.5 Ma (K = 4.9 wt.%) for paragonite–phengite mixture and 85.3 Ma (K = 7.8 wt.%) for phengite and an isochron age of 91 ± 13 Ma from the two dataset. The eclogite gives a plateau age of 132 Ma in Ar/Ar step-heating analyses using single phengite grain and an inverse isochron age of 130 ± 39 Ma with an initial ⁴⁰Ar / ³⁶Ar ratio of 434 ± 90 in Ar/Ar spot analyses of phengites and paragonites. The Cretaceous isochron ages are interpreted to represent the timing of early stage of exhumation of the eclogitic rocks assuming revised high closure temperature (500 °C) for phengite K–Ar system. The phengites in pelitic schists have experienced retrograde reaction which modified their chemistry during intense deformation associated with the exhumation of these rocks with the release of significant radiogenic ⁴⁰Ar from the crystals. The argon release took place in the schists that experienced the retrogression to upper greenschist facies metamorphisms from the eclogite facies conditions.     

Effective stress analyses of liquefaction-induced deformation in river dikes

A series of effective stress analyses is carried out on the seismic performance of river dikes based on the case histories during the 1993 Hokkaido-Nansei-oki and 1995 Hyogoken-Nambu earthquakes in Japan. Seven case histories selected for the analyses involve a crest settlement ranging from none to 2.7 m in the dikes 3–6 m high with evidence of liquefaction at foundation soil. The effective stress model used is based on a multiple shear mechanism and was developed by one of the authors. The soil parameters are evaluated based on the site investigation and laboratory test results. The results of the analyses are basically consistent with the observed performance of the river dikes. In particular, the effective stress model shows a reasonable capability to reproduce the varying degree of settlements depending on the geotechnical conditions of foundation soils beneath the dikes. The analyses also indicate that the effect of a cohesive soil layer mixed with the liquefiable sand layers beneath the dikes can be a primary factor for reducing the liquefaction-induced deformation of dikes.     

Traveling wave effects on a tall and narrow building: Observation and analysis

The purpose of this paper is to investigate the seismic response of a tall and narrow building, for example, a turbine building of thermal power plant, due to a traveling shear wave. It is considered that the dynamic response of the building can be affected by the spatial variance of seismic ground motion, because the building has a long-shaped foundation (43 meters wide by 343 meters long by 4 meters thick). First, analytical study was conducted using obliquely incident harmonic motion. And comparing the earthquake response observed at different points of foundation slab, it was found that the response at the end point where input wave reaches later is larger than that at the other end. From these studies, it was assured that the antisymmetric mode, which can be neglected in ordinary analysis, is excited by phase difference of input motion.     

Structure and crystal chemistry of a dense polymorph of tricalcium phosphate Ca3 (PO4)2: A host to accommodate large lithophile elements in the earth's mantle

A phase of Ca₃ (PO₄)₂, synthesized at 12GPa and 2300° C, is structurally analyzed by the single crystal X-ray diffraction method. This Ca₃(PO₄)₂ is found to be a dense polymorph of tricalcium phosphate isostructural with Ba₃ (PO₄)₂ and named γ-Ca₃ (PO₄)₂. In the structure of Ca₃ (PO₄)₂, a phosphorus atom is tetrahedrally coordinated by oxygen atoms and calcium atoms occupy two types of large metal sites. The Ca(1) site has twelve oxygen neighbours with the mean bond length of 2.739 Å while the other Ca(2) site is coordinated by ten oxygen atoms with the mean Ca-O distance of 2.588Å. The structure is characterized by the translationally interconnected polyhedral sequence PO₄-Ca(2)O₁₀-Ca (1)O₁₂-Ca (2)O₁₀-PO₄ in the direction of the c axis. This dense phase of Ca₃(PO₄)₂ with two large metal sites may be an important host for very large lithophile elements in the deep upper mantle of the earth.