Relationships between climatic factors and flower and boll production in Egyptian cotton (Gossypium barbadense)

Fruiting of cotton plant is determined and influenced by cultivar, climatic conditions, management practices and pests. An understanding of the flowering and boll retention patterns of cotton cultivars can contribute to more efficient and economical crop management. The objective of this investigation was to study the effect of various climatic factors on flower and boll production of Egyptian cotton. This could be used in formulating advanced predictions of the effect of certain climatic conditions on the production of Egyptian cotton. Two uniform field trials, using cotton Gossypium barbadense cv. Giza 75 were carried out in 1992 and 1993 at the Agricultural Research Station, Agricultural Research Center, Ministry of Agriculture, Giza, Egypt, to investigate the relationships between climatic factors, flower and boll production. Climatic factors included maximum and minimum air temperatures along with their difference, evaporation, surface soil temperature (grass temperature or green cover temperature) at 0600 and 1800 h°C⁻¹, sunshine duration, maximum and minimum humidity and wind speed. The effects of climatic factors on flower and boll production were quantified in the absence of water and nutritional deficits and damage effects of insects. Results obtained indicate that evaporation, sunshine duration, humidity, surface soil temperature at 1800 h, and maximum air temperature, were the important climatic factors that significantly affect flower and boll production of Egyptian cotton. Consequently, applying appropriate specific cultural practices that minimize the deleterious effect of these factors will lead to an improvement in cotton yield.     

Mineralogy,Fluid inclusions and stable isotopes study constraints on genesis of sulfide ore mineral,Qaladiza area Qandil Series,Iraqi Kurdistan Region

The metalized quartz veins is located 5 km west of the Iraqi-Iran border in the Qandil range. The quartz veins included sulfide and oxide ore minerals which mostly occur in the form of open-space filling texture. The polymetallic mesothermal quartz veins are hosted by marble and phyllite rocks. Within these veins, multiphase, open-space filling and crustiform, bedding to massive textures with pyrite, sphalerite, galena, chalcopyrite,galena, sphalerite, tenorite, azurite, and malachite are observed. Selected samples were analyzed by using ore microscopy and electron probe micro analyzer (EPMA) and scanning electron microscope (SEM). Ore minerals show replacement textures. The paragenesis diagram was made from a careful study of polished sections and three stages have been identified including pre-stage mineralization, mineralization, and post-mineralization stages.Fluid inclusion microthermometric analysis of 15 primary inclusions of quartz veins indicated that ore mineralization at the studied area were formed by a mesothermal, low to medium density, and dilute NaCl-type fluid system. The source of the fluid is mostly metamorphic which became mixed with other fluids later. Hydrothermal fluids of the selected studied area were classified into two groups based on microthermometry study; the first group had a higher homogenization temperature (335.5 to 386.8 °C) than the second group (194.1 to 298.5 °C), with a small difference in salinity between them. Nearly each group has different complexes including chloride and sulfide complexes respectively. The results of stable sulfur isotope of the ore minerals (chalcopyrite and sphalerite) confirmed the sedimentary and/or metamorphic origin of the ore mineralization.     

Variation of δ18O, δD and 3H in karst springs of south Kashmir,western Himalayas (India)

Water samples were collected from cold and warm karst springs for stable isotopes (δ¹⁸O and δD) and ³H from SE of Kashmir valley (western Himalayas) to distinguish the sources of recharge and infer their recharge areas. The spring water samples were most depleted in heavier isotopes in May (average δ¹⁸O: ?8.87‰ and δD: ?50.3‰) and enriched in September (average δ¹⁸O: ?7.58‰ and δD: ?48.1‰). The depleted ¹⁸O and ²H of spring waters bear the signatures of winter precipitation while as the enriched ¹⁸O and ²H of spring waters bear the signature of summer rainfall. D‐excess and ³H corroborate with the stable isotope results that the spring flow in spring season (May) and autumn (September) is dominantly controlled by the melting of winter snowmelt and summer rainfall, respectively. The results showed that unlike δD, the δ¹⁸O value in the karst spring waters decreases in January suggesting δ¹⁸O shift. The spring water samples also fall above the Local Meteoric Water Line and Global Meteoric Water Line indicating the δ¹⁸O shift due to interaction of groundwater with the host carbonate rocks during its traverse. The mean elevation of the recharge areas of the springs using δ¹⁸O and δD tracers was also estimated. Copyright © 2014 John Wiley & Sons, Ltd.     

Weathering and anthropogenic influences on the water and sediment chemistry of Wular Lake,Kashmir Himalaya

This paper presents a study on the Wular Lake which is the largest fresh water tectonic lake of Kashmir Valley, India. One hundred and ninety-six (196) water samples and hundred (100) sediment samples (n = 296) have been collected to assess the weathering and Anthropogenic impact on water and sediment chemistry of the lake. The results showed a significant seasonal variability in average concentration of major ions being highest in summer and spring and lower in winter and autumn seasons. The study revealed that lake water is alkaline in nature characterised by medium total dissolved solids and electrical conductivity. The concentration of the major ion towards the lake central showed a decreasing trend from the shore line. The order of major cations and anions was Ca²⁺ > Mg²⁺ > Na⁺ > K⁺ and HCO₃ ^? > SO₄ ^2? > Cl^?, respectively. The geochemical processes suggested that the chemical composition lake water is mostly influenced by the lithology of the basin (carbonates, silicates and sulphates) which had played a significant role in modifying the hydrogeochemical facies in the form of Ca–HCO₃, Mg–HCO₃ and hybrid type. Chemical index of alteration values of Wular Lake sediments reflect moderate weathering of the catchment area. Compared to upper continental crust and the post-Archean Shale, the sediments have higher Si, Ti, Mg and Ca contents and lower Al, Fe, Na, K, P, Zn, Pb, Ni, Cu content. Geoaccumulation index (Igeo) and US Environmental Protection Agency sediment quality standards indicated that there is no pollution effect of heavy metals (Zn, Mn, Pb, Ni and Co).The study also suggested that Wular Lake is characterised by both natural and anthropogenic influences.     

Lower Oligocene Calc-Alkaline Spessartitic Lamprophyres from Central Iran (East of Anarak Area); an Evidence from the Eastern Branch of Neotethys Subduction-Related Mantle Enrichment

Geotectonics - The Lower Oligocene Kal-e-kafi (East of Anarak, Central Iran) lamprophyres occur as stocks and dikes, which cross-cut the Eocene volcanic and Cretaceous sedimentary rocks. The...     

Study on elastic response of structures to near-fault ground motions through record decomposition

Accelerograms recorded near active faults have some important characteristics that make them different from those recorded in far-fault regions. High-frequency components in acceleration records and long-period velocity pulses are among notable specifications of such ground motions. In this paper, a moving average filtering with appropriate cut-off frequency has been used to decompose the near-fault ground motions into two components having different frequency contents: first, Pulse-Type Record (PTR) that possesses long-period pulses; second, the relatively high-frequency BackGround Record (BGR), which does not include large velocity pulses. Comparing the results with those extracted through wavelet analysis shows that moving average filter is an appropriate and efficient tool for near-fault records decomposition. The method is applied to decompose a suite of 91 selected near-fault records and the elastic response of structures is examined through their response to the decomposed parts. The results emphasizes that in contrast with ordinary far-fault earthquake records, response spectra of near-fault ground motions typically have two distinct local peaks, which are representatives of the high- and low-frequency components, i.e., BGR and PTR, respectively. Moreover, a threshold period is identified below which the response of structures is dominated by BGR while PTR controls the response of structures with periods longer than this period.     

Application of Cracked Triangular Specimen Subjected to Three-Point Bending for Investigating Fracture Behavior of Rock Materials

Numerical and experimental studies were performed on a new fracture test configuration called the edge cracked triangular (ECT) specimen. Using several finite-element analyses, the fracture parameters (i.e., K _I, K _II, and T-stress) were obtained for different combinations of modes I and II. The finite-element results show that the ECT specimen is able to provide pure mode I, pure mode II, and any mixed-mode loading conditions in between. Also, a series of mixed-mode fracture experiments were conducted on Neiriz marble rock using the proposed specimen. Furthermore, the generalized maximum tangential stress (GMTS) criterion was used to predict the experimental results. The GMTS criterion makes use of a three-parameter model (based on K _I, K _II, and T) for describing the crack tip stresses. Due to the significant positive T-stresses that exist in the ECT specimen, typical minimum fracture toughness values were expected to be obtained when the ECT specimen is used. The direction of fracture initiation and the path of fracture growth were also obtained theoretically using the GMTS criterion, and good agreement was observed between the experimental fracture path and theoretical simulations. The fracture study of this specimen reveals that the ECT specimen can be also used in mixed-mode fracture studies of rock materials in addition to the conventional circular or rectangular beam test samples.     

Changes and opportunities for integrated management of the Razim-Sinoe Lagoon System

The aim of this paper is to identify the general trend of changes and the basic requirements of the most important lagoon system of the Black Sea, on the basis of critical analysis of existing data. A more coherent set of data sampled after 1988 on the basis of some intensive and extensive study and research programmes, including the main trophic parameters and the most representative structural and functional features of this complex of ecotonal lakes, is comparatively analysed together with more fragmentary data previously existing. The structural and functional changes within this complex of lakes were analysed based on 31 most representative variables belonging to the main abiotic and biological compartments of the two main lakes, Razim and Sinoe: dissolved organic carbon, dissolved oxygen, trophic state index TSI, nutrient content and ratio, salinity, chlorophyll, phytoplankton, zooplankton, submerged macrophytes, zoobenthos, fish and birds. Two stages were distinguised in the main structural changes, including morphometric connections with the Danube River and the Black Sea and hydrochemistry and its effects on communities. These transitions were associated with two main driving forces, water desalinisation and rapid eutrophication, and with other two kinds of man-induced changes, local hydrotechnical buildings and long-distance variables operating over the entire Danube River watershed. The information support system for sustainable management of the Razim-Sinoe Lagoon Complex as a part of the Danube Delta Biosphere Reserve, integrating existing data from research programmes and an integrated monitoring system for new data is a final conclusion on further needs.     

Simulation of global warming effect on outdoor thermal comfort conditions

In the coming decades, global warming and increase in temperature, in different regions of the world, may change indoor and outdoor thermal comfort conditions and human health. The aim of this research was to study the effects of global warming on thermal comfort conditions in indoor ambiences in Iran. To study the increase in temperature, model for assessment of greenhouse-gas induced climate change scenario generator compound model has been used together with four scenarios and to estimate thermal comfort conditions, adaptive model of the American Society of Heating, Refrigerating and Air-conditioning Engineers has been used. In this study, Iran was divided into 30 zones, outdoor conditions were obtained using meteorological data of 80 climatological stations and changes in neutral comfort conditions in 2025, 2050, 2075 and 2100 were predicted. In accordance with each scenario, findings from this study showed that temperature in the 30 zones will increase by 2100 to between 3.4 °C and 5.6 °C. In the coming decades and in the 30 studied zones, neutral comfort temperature will increase and be higher and more intense in the central and desert zones of Iran. The low increase in this temperature will be connected to the coastal areas of the Caspian and Oman Sea in southeast Iran. This increase in temperature will be followed by a change in thermal comfort and indoor energy consumption from 8.6 % to 13.1 % in air conditioning systems. As a result, passive methods as thermal inertia are proposed as a possible solution.