Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

The comparison between allozyme and RAPD makers for the population genetic structure analysis of scallop Chlamys farreri

1INTRODUCTION Since the first use in human genetic research in1966,allozyme has become the most popular genetic marker for population genetics studies for almost all groups of animals and plants(Lewontin and Hubby,1966;Murphy et al.,1996).In the past seve…     

Neutrino mass,luminosity variation,and spectrum of SN1987A

In this paper, the neutrino mass has been determined from SN1987a observation in a manner that the simultaneity of neutrino emission is not regarded as the starting point, but is itself defined through the analysis by Monte-Carlo simulation. The result is that the neutrino mass lies in 3–4 eV, possiblym _v 3.6 eV. Neutrino luminosity variation and neutrino spectrum are also obtained. Comparison with theories gives further support to the mass determination, and also predicts the mass of progenitor star of SN1987a to be in the range of 12–25M .The project supported by the National Natural Science Foundation of China.     

火试金法测定铜精矿中金含量结果的不确定度评定

对火试金法测定铜精矿中金含量的结果进行不确定度评定。分析了铜精矿样品称量、铜精矿样品的不均匀性和配料处理,以及金粒称量等因素对金含量测量结果不确定度的影响,并得出火试金法测量铜精矿中金含量的扩展不确定度。     

Triassic Nb-enriched basalts, magnesian andesites, and adakites of the Qiangtang terrane (Central Tibet): evidence for metasomatism by slab-derived melts in the mantle wedge

New chronological, geochemical, and isotopic data are reported for Triassic (219–236 Ma) adakite-magnesian andesite-Nb-enriched basaltic rock associations from the Tuotuohe area, central Qiangtang terrane. The adakites and magnesian andesites are characterized by high Sr/Y (25–45), La/Yb (14–42) and Na₂O/K₂O (12–49) ratios, high Al₂O₃ (15.34–18.28 wt%) and moderate to high Sr concentrations (220–498 ppm) and ε_ND (t) (+0.86 to +1.21) values. Low enrichments of Th, Rb relative to Nb, and subequal normalized Nb and La contents, and enrichments of light rare earth elements combine to distinguish a group of Nb-enriched basaltic rocks (NEBs). They have positive ε_ND (t) (+2.57 to +5.16) values. Positive correlations between Th, La and Nb and an absence of negative Nb anomalies on mantle normalized plots indicate the NEBs are products of a mantle source metasomatized by a slab melt rather than by hydrous fluids. A continuous compositional variation between adakites and magnesian andesites confirms slab melt interaction with mantle peridotite. The spatial association of the NEBs with adakites and magnesian andesites define an “adakitic metasomatic volcanic series” recognized in many demonstrably subduction-related environments (e.g., Mindanao arc, Philippines; Kamchatka arc, Russia; and southern Baja California arc, Mexico). The age of the Touhuohe suite, and its correlation with Triassic NEB to the north indicates that volcanism derived from subduction-modified mantle was abundant prior to 220 Ma in the central Qiangtang terrane.     

某型短波电台的中频数字化设计

针对短波射频数字化对器件的要求较高,功耗较大,现在一般采用中频数字化技术.给出了某型短波电台的中频数字化设计方案,介绍了电台中频数字化部分的实现方法及基本原理.并介绍了本设计中使用的Inters公司生产的数字上变频器HSP50415,美国AD公司生产的数字接收信号处理芯片AD6620和TI公司TMS320VC5416芯片的结构、功能和特点,给出了它们在数字变频应用的硬件模块接口图.测试结果证明,通过在中频部分使用数字变频器提高了电台的收发性能,较模拟化中频有着成本低廉、功耗低、兼容性好和可扩展性好.     

扎赉诺尔坳陷带砂体特征及找铀矿方向分析

扎赉诺尔坳陷带内诸凹陷具有不同的沉积特征和砂体特点,查干诺尔和克鲁伦凹陷砂体形成于粗粒冲积扇和扇三角洲沉积体系,砂体厚度变化大,相变快,有机质含量低,顶底板均不发育;呼伦湖凹陷以小型三角洲平原相砂体为主,具有较稳定的泥砂岩结构,有机质含量高,砂体厚度和横向延伸较稳定,但砂体铀含量较低;胡列也吐凹陷砂体以辫状河三角洲体系产出为主,砂体厚度大,延伸稳定,底板发育,顶板发育不完全,砂体铀含量高.扎赉诺尔坳陷带各凹陷砂体的不同特点,决定了它们具有不同的找矿潜力.通过砂体综合条件对比分析,笔者认为胡列也吐凹陷和克鲁伦凹陷砂体铀成矿条件较好,呼伦湖凹陷次之,查干诺尔凹陷较差.     

山东近海牙鲆(Paralichthys olivaceus)自然和养殖群体10个微卫星基因座位的遗传多态性分析

采用微卫星遗传标记技术对山东近海牙鲆自然群体和养殖群体的遗传多样性进行了研究。实验所用牙鲆于2003年5月分别采自山东近海和青岛胶南养鱼场，各20尾，取全血或肌肉组织，以酚-仿抽提方法提取基因组DNA，利用筛选获得的10对微卫星引物进行PCR扩增，反应产物经8％非变性聚丙烯酰胺凝胶电泳分离、EB显色，用ImageMasterl D Elite(Version 3．01)软件分析电泳结果，并计算了相应的遗传学参数。结果表明，在自然和养殖群体中，10个基因座位的等位基因平均数(α)分别为6．7和6．1，每个基因座位有效等位基因数(αe)分别为1．8—6．8和2．5—6．7，群体平均杂合度(H)分别为0．8120和0．7310；两个群体间的遗传相似性系数、遗传距离和基因分化系数为0．8558、0．1557和0．0558；自然群体内每个座位上的多态信息含量(PIC)为0．59—0．84、个体识别率(DP)为0．54—0．86、非父排除率(PPE)为0．41—0．72，其累积个体识别率和非父排除率均达到0．9999，表明所选座位属中高识别力的遗传标记，可以将它们应用于今后牙鲆雌核发育群体的遗传变异分析以及进一步的遗传育种的研究中。     

中太平洋铁锰结壳铅同位素研究

已有研究表明大洋中溶解的铅(Pb)来源于陆源物质，但是，对Pb进入大洋的途径争议很大。为此分析了取自中太平洋两块铁锰结壳样品的Pb同位素组成，获得了整个新生代的中太平洋Pb同位素演化历史。结果表明这两块结壳的Pb同位素随时间的演化曲线与中北太平洋沉积物岩心LL44-GPC3中风成碎屑的Pb同位素演化曲线相似。证实该区深水中的天然溶解铅主要来自风成粉尘，并且50Ma之前中太平洋中溶解Pb同位素组成主要取决于源自美洲的风成粉尘的输入，40Ma之后主要取决于源自亚洲的风成粉尘的输入。