Geology of the lunar farside crater Necho

The lunar farside crater Necho (30 km diameter) displays intricate morphological and structural characteristics. The highland setting provides a complex impact site when compared with the relatively uniform setting of mare craters. Therefore, the effects of pre-impact topography and structure play a dominant role in Necho's formation and modification. Necho's bright ejecta, extensive rays, fresh morphology, and lack of superposed craters indicate that it is extremely young. The asymmetric distribution of ejecta materials may be due to substrate effects, topographic shalowing, or oblique impact.Necho's interior is divided into five physiographic units based on morphologic differences: three floor units (Necho does not display a true flat floor), one hilly central unit, and the wall unit which includes terraces and smooth walls. The interior of the crater also exhibits an unusual asymmetry in the prevalence of terraced units on the western wall. Interior morphology and terrace orientations are probably the result of pre-impact effects. Structural and topographic orientations associated with three large pre-existing degraded craters dominate the impact site.     

Trace elements and polycyclic aromatic hydrocarbons (PAHs) concentrations in deep Gulf of Mexico sediments

The concentrations of polycyclic aromatic hydrocarbons (PAHs) and trace elements were determined for surface (top 2 cm) sediment samples collected during the deep Gulf of Mexico benthos (DGoMB) study .These elements and compounds are known to be toxic to organisms at high concentrations and may affect biological communities. There is no indication of major anthropogenic input of the elements Be, Co, Cr, Fe, Si, Tl, V, K, Mg, Ca, Sr and Zn, based on normalization to Al. The concentrations of these metals in the sediment are a function of the relative amounts of trace-metal-rich Mississippi River-derived silicate material and trace-metal-poor plankton-derived carbonate. This is not true for the elements Ba, Ni, Pb, Cd, As, Cu and Mn, whose concentrations show considerable scatter when normalized to Al and a general enrichment. On a normalized basis, Mn is enriched 5–10 fold, Cu and Ni 2–3 fold and Pb 2 fold over Mississippi River-derived material. These enrichments are likely the result of remobilization of metals from depths in the sediment column where reducing conditions exist. The Ba concentrations at selected sites are higher than those of average clay-rich sediments, but are typical of sediments from near oil well platforms in the northern Gulf of Mexico. In the case of Ba, it seems likely that the enrichments, as high as a factor of 10, are due to disposal of oil well drilling mud. The Ba-enriched samples are from the three shallowest water sites in the Mississippi Trough (sites MT1, 2 and 3) and from site C1 and WC5. All are in an area of intense petroleum exploration and development. PAH concentrations are also elevated at MT1, MT3 and C1. The total PAH concentration ranged from not detected (ND) to 1033 ng/g with a mean of 140 ng/g. Even at the sites most enriched in PAHs and trace elements, the concentrations are not at the levels expected to adversely affect the biota. However, these predicted non-effects are based on research using mostly near-shore estuarine species, not on the indigenous species at the sampling sites.     

Geographic analysis of manufacturing industry in Saudi Arabia

The study focuses on the analysis of manufacturing industry in Saudi Arabia by examining development, structure and spatial distribution. The analysis has shown that Saudi manufacturing is basically of recent development and is highly capital- and energy-intensive, particularly the hydrocarbon-based groups. Perhaps the most conspicuous weakness of Saudi industrialization is the almost total dependence on expatriate labour. Foreign capital and expertise share in the building and development of the industrial sector by providing technical, managerial, and marketing skills. Saudi industry is heavily subsidized by the government, and the public sector plays a commanding role in industrial development. Large-scale basic industries are owned and run by the government, while light manufacturing of the import-substitution type is dominated by the private sector. One of the main characteristics of manufacturing industry is that it is scantily diversified, modestly concentrated and remarkably linked geographically but not functionally or structurally. Although the authorities are exerting tremendous efforts to achieve a regional balance in industrial development, Saudi manufacturing industry is significantly polarized, urban-oriented and highly associated with the major axes of population scatter. Like all developing countries beginning to industrialize, Saudi manufacturing industry faces certain problems which have to be resolved so as to lay the foundations for a sound and prosperous industrial future. The paper goes on to indicate problems and to suggest solutions.     

Water supply problems in the Butana region-central Sudan with special emphasis on Jebel Qeili area

The Butana region of central Sudan is famous for its animal wealth and extensive pastures. Yet scarcity of water resources in the area especially during the dry seasons handicaps the proper utilization of these pastures. The area is occupied by non-water-bearing basement rocks and the only source of water is from direct run-off. Thus large numbers of small-size water reservoirs, haffirs, were constructed, but these are inadequate to provide enough water for the growing human and animal population. An all-year lake is here proposed to be constructed utilizing the ring-structure the Jebel Qeili igneous complex, central Butana. This lake is expected to solve the present water problem and meet the future demand of central Butana at the present rate of human and animal growth.     

A Least-squares Window Curves Method for Interpretation of Magnetic Anomalies Caused by Dipping Dikes

We have developed a least-squares method to determine simultaneously the depth and the width of a buried thick dipping dike from residualized magnetic data using filters of successive window lengths. The method involves using a relationship between the depth and the half-width of the source and a combination of windowed observations. The relationship represents a family of curves (window curves). For a fixed window length, the depth is determined for each half-width value by solving one nonlinear equation of the form f (z) = 0 using the least-squares method. The computed depths are plotted against the width values representing a continuous curve. The solution for the depth and the width of the buried dike is read at the common intersection of the window curves. The method involves using a dike model convolved with the same moving average filter as applied to the observed data. As a result, this method can be applied to residuals as well as to measured magnetic data. Procedures are also formulated to estimate the amplitude coefficient and the index parameter. The method is applied to theoretical data with and without random errors. The validity of the method is tested on airborne magnetic data from Canada and on a vertical component magnetic anomaly from Turkey. In all cases examined, the model parameters obtained are in good agreement with the actual ones and with those given in the published literature.     

Short-term variations of some UV-ceti type flare stars

Sinusoidal variations in bothV - andB-bands were detected in some flare stars of the UV Ceti type outside of flares. This detection has confirmed the light variation detection in Johnson'sV -band in EV Lac at quiet-state luminosity by Pettersen (1980) with a cyclic period equals about 4 _. ^d 378 and an amplitude of about 0 _. ^m 07. An interpretation of these short cyclic periods is that they are due to intensity modulations from a photospheric spot group as a result of stellar equatorial rotations. A short period of 14 days with an amplitude of 0 _. ^m 099 was detected inB-band in AD Leo. For the two flare stars, BD+55° 1823 and DO Cep in bothV- andB-bands, cyclic periods of more than 3 days and less than 17 days with amplitudes more than 0 _. ^m 090 and less than 0 _. ^m 250 have been registered. A significant contribution has been found in the flare star EV Lac in bothV- andB-bands at its quiescent-state luminosity where the detected cyclic periods are agreed with that which was detected by Pettersen (1980) in the same flare star in Johnson'sV-band, about 4 days. Furthermore, we found the same cyclic period in the colour index,B - V (about 4 days) which strengthens starspot phenomenon. This colour index period could not be detected by Pettersen (1980).     

On the iron interpretation of the 6.4 keV emission line from SGR 1900+14

A 6.4 keV emission line was discovered in an unusual burst from the soft gamma repeater SGR 1900+14 with the Rossi X-ray Timing Explorer (RXTE). The line was detected in part of a complex multipeak precursor that preceded the unusual burst of 1998 August 29, i.e. two days after the giant flare of August 27 from the source. The origin of the line was not firmly identified and two possible interpretations were equally plausible including (a) Kα fluorescence from a small iron rich material that was ejected to the magnetosphere during the August 27 flare, and (b) proton or α-particle cyclotron resonance. If the iron scenario was correct, we expect to find evidence for the line during the intervening interval between the flare and the August 29 burst, i.e. on August 28. Here we present the results of the August 28 burst observation, taken with RXTE. We detect a total of seven bursts whose individual and joint spectra do not show evidence for spectral lines. We also investigated a sample of nine bursts before and after the August 29 burst (from 1998 June to December) that do not reveal evidence for a spectral line near 6.4 keV or elsewhere. These results disfavor the iron scenario and make the proton/α-particle cyclotron resonance interpretation more plausible. The appearance of the emission line in part of a complex burst and its absence from the studied sample indicate that the line is likely due to a transient phenomenon that may depend on the burst morphology, energetics and the properties of the emission region.      

Expansion of the first order planetary disturbing function by Smart's method

In this part we expand the indirect part of the planetary perturbing function by Smart's method, via Taylor's theorem. We neglect, in our expansion, terms of degree higher than the fourth with regard to the eccentricities and tangents of the inclinations.     

Mode of formation of the Nile Gorge in northern Egypt: a study by DEM‐SRTM data and GIS analysis

This is an overview of the mode of formation of the Nile Gorge in northern Egypt. It is based on the interpretation of the Shuttle Radar Topography Mission (SRTM) data along with detailed analysis of landsat image, geological map and seismic data. The results show that the current course of the Nile was caused by a differential uplift of two plateaus: Ma'aza, to the east, and Western Desert plateau, to the west of the river. This uplift is caused by dynamic forces resulting from subsurface convection processes. It also contributed to the formation of several drainage systems, basins and structural features. Abundant faults and fractures that are parallel to the Nile Valley on both flanks that are associated with uplift are proven to be contemporaneous with formation of the river. We conclude that understanding of the uplift is crucial to visualizing the Nile course and its geodynamic formation. The information derived from the SRTM data reveals invaluable knowledge in support of the presented remotely sensed geological features. The paper clearly explains the stages of formation of the Nile segments in space and time and structural controls on the path of the Nile River in Egypt. Copyright © 2015 John Wiley & Sons, Ltd.