Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.     

Fracture sealing of quartzite under a temperature gradient: experimental results

Veined lithologies are formed by fracturing and sealing processes, with the veins representing former fluid conduits through the rock. Although detailed fieldwork and numerical simulations have provided a better understanding of vein growth, few studies have attempted to seal fractures and generate veins experimentally. In this pilot study, we subjected fractured quartzite to temperature gradients of 45–125 °C under hydrothermal conditions in a static fluid, with the aim of precipitating secondary quartz in the cooler portions of the fracture. Results show that secondary quartz precipitates due to the imposed temperature gradient, causing the initial fracture to seal locally. Although no systematic sealing pattern was observed along the fracture, samples subjected to higher temperatures exhibit a smaller fracture width and appear to have reacted more extensively. Electron microprobe mapping visualizes the spatial distribution of secondary quartz, which contains elevated concentrations of aluminium.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

Microbial mass-dependent fractionation of chromium isotopes

Mass-dependent fractionation of Cr isotopes occurs during dissimilatory Cr(VI) reduction by Shewanella oneidensis strain MR-1. Cells suspended in a simple buffer solution, with various concentrations of lactate or formate added as electron donor, reduced 5 or 10 μM Cr(VI) to Cr(III) over days to weeks. In all nine batch experiments, ⁵³Cr/⁵²Cr ratios of the unreacted Cr(VI) increased as reduction proceeded. In eight experiments covering a range of added donor concentrations up to 100 μM, isotopic fractionation factors were nearly invariant, ranging from 1.0040 to 1.0045, with a mean value somewhat larger than that previously reported for abiotic Cr(VI) reduction (1.0034). One experiment containing much greater donor concentration (10 mM lactate) reduced Cr(VI) much faster and exhibited a lesser fractionation factor (1.0018). These results indicate that ⁵³Cr/⁵²Cr measurements should be effective as indicators of Cr(VI) reduction, either bacterial or abiotic. However, variability in the fractionation factor is poorly constrained and should be studied for a variety of microbial and abiotic reduction pathways.     

The Ectoparasitic Gastropod Boonea (= Odostomia) impressa: Population Ecology and the Influence of Parasitism on Oyster Growth Rates

Abstract. Boonea (= Odostomia) impressa is a common ectoparasite of oysters. In the laboratory, small oysters (Crassostrea virginica) parasitized by natural densities of B. impressa produced 75 % less new shell than unparasitized oysters. Shell deposition rates of previously parasitized oysters increased significantly after all B. impressa were removed. Thus, the decrease in growth rate, although significant, apparently was not permanent. B. impressa preferentially parasitized small, living oysters (≤2.5cm) in the field, even though a higher percentage of large, living oysters (>2.5cm) was available. The snails maintained an aggregated distribution on the oyster reef. The number of B. impressa per oyster clump was positively correlated with the number of living oysters per clump, however some clumps with few or no living oysters had many B. impressa. Thus, food availability only partially explained the pattern of distribution. B. impressa was very mobile. About 50 % of the population moved in one week. Reproduction occurred throughout the year with a peak period in May. Recruitment was greatest in July, however new recruits were observed throughout the year. The reduction in growth rate of parasitized oysters, the snaiľs propensity towards parasitizing small oysters and the snail's tendency to be contagiously distributed suggests that B. impressa potentially exerts a significant influence on the population structure and health of oyster populations.     

Carbon and oxygen isotope composition of foraminifera in two cores from the Bannock Basin area, eastern Mediterranean

Two cores from the Bannock Basin in the eastern Mediterranean have been analysed for δ¹⁸0 and the δ¹³C in planktonic foraminifera. One core (02-PC) was extracted from the anoxic brine, the other (08-GC) from a plateau east of the brine.

The absence of sapropelic muds in Core 08-GC from the two Holsteinian euxinic cycles, together with the presence of isotopic spikes, suggests that the plateau has risen during the last ca. 200,000 years by ca. 2.5 mm/yr.

The δ¹⁸0 amplitude of Globigerinoides ruber in eastern Mediterranean cores is only ca. 0.5%. larger than for this species in North Atlantic cores. This suggests that the surface oxygen isotopic composition of both bodies of water followed each other fairly closely during the Late Pleistocene, except during the stagnant phases.     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

Distribution and transport of organic matter along a filament-eddy system in the Canaries – NW Africa coastal transition zone region

The distribution and transport of chlorophyll a (Chla), particulate (POC) and dissolved (DOC) organic carbon, and the respiratory ETS activity of the microplankton community were studied along a filament-eddy system located in the transition zone between the NW Africa upwelling and Canary Islands waters. Two independent filaments (F1 and F2) stemming from the coastal jet, between Cape Juby and Cape Bojador, merged about 100 km offshore, turning southward and onshore forced by the circulation of a recurrent oceanic cyclonic eddy. In general, the coastal upwelling waters presented higher Chla, but lower POC, DOC and ETS activity than filament waters. However, differences in organic carbon distribution and respiratory activity were observed among stations from the two filaments. The bio-chemical fields were strongly influenced by a complex sub-mesoscale hydrography resulting from the interaction of cyclonic and anticyclonic island eddies with the filaments. The combined F1 + F2 filament system transported 97.1 kg s⁻¹ of excess (non-refractory) total organic carbon (e-TOC), a value comparable to other published estimates from upwelling filaments in the NE Atlantic. About 90% of e-TOC was exported as DOC, since eddy re-circulation precluded the offshore transport of POC. Assuming that the calculated transport of e-TOC is representative of the annual average, the yearly offshore transport (3.1 x 10⁹ kg C) would represent about 25% of the upwelling primary production of the region of study.     

Toward a generic method for studying water renewal, with application to the epilimnion of Lake Tanganyika

We present a method, based on the concept of age and residence time, to study the water renewal in a semi-enclosed domain. We split the water of this domain into different water types. The initial water is the water initially present in the semi-enclosed domain. The renewing water is defined as the water entering the domain of interest. Several renewing water types may be considered depending on their origin. We present the equations for computing the age and the residence time of a certain water type. These timescales are of use to understand the rate at which the water renewal takes place. Computing these timescales can be achieved at an acceptable extra computer cost.The above-mentioned method is applied to study the renewal of epilimnion (i.e. the surface layer) water in Lake Tanganyika. We have built a finite element reduced-gravity model modified to take into account the water exchange between the epilimnion and the hypolimnion (i.e. the bottom layer), the water supply from precipitation and incoming rivers, and the water loss from evaporation and the only outgoing river. With our water renewal diagnoses, we show that the only significant process in the renewal of epilimnion water in Lake Tanganyika is the water exchange between the epilimnion and the hypolimnion, other phenomena being negligible.