The origin of selected lunar geochemical anomalies: Implications for early volcanism and the formation of light plains

The Apollo orbital geochemistry, photogeologic, and other remote sensing data sets were used to identify and characterize geochemical anomalies on the eastern limb and farside of the Moon and to investigate the processes responsible for their formation. The anomalies are located in the following regions: (1) Balmer basin, (2) terrain northeast of Mare Smythii, (3) near Langemak crater, (4) Pasteur crater, (5) terrain northwest of Milne basin, (6) northeast of Mendeleev basin, (7) north and northeast of Korolev basin, (8) terrain north of Taruntius crater, and (9) terrain north of Orientale basin. The anomalies are commonly associated with Imbrian- or Nectarian-aged light plains units which exhibit dark-haloed impact craters. The results of recent spectral reflectance studies of dark-haloed impact craters plus consideration of the surface chemistry of the anomalies strongly indicate that those geochemical anomalies associated with light plains deposits which display dark-haloed impact craters result from the presence of basaltic units that are either covered by varying thickness of highland debris or have a surface contaminated with significant amounts of highlands material. The burial or contamination of ancient volcanic surfaces by varying amounts of highland material appears to have been an important (though not the dominant) process in the formation of lunar light plains. Basaltic volcanism on the eastern limb and farside of the Moon was more extensive in both space and time than has been accepted.     

Experimental simulation of Titan's atmosphere: Detection of ammonia and ethylene oxide

For several years now, an experimental simulation of Titan's atmosphere has been on going at LISA. A cold plasma is established in a gas mixture representative of the atmosphere of the satellite. In these experiments, more than 70 organic compounds have been identified, including the first identification in this type of experimental simulation of C₄N₂ already detected in its solid form on Titan, which suggests that the setup correctly mimics the chemistry of Titan's atmosphere.We have carried out the first experimental simulation including O-containing compounds in order to study the influence of the presence of CO on the chemical behavior of Titan's atmosphere. With the help of gas chromatography–mass spectrometry (GC–MS) and infrared spectroscopy (IRS) we can thus determine which minor species still undetected in Titan's atmosphere are likely to be present and understand the complex chemistry of the atmosphere of this satellite. Surprisingly we have identified unpredicted O-containing gaseous compounds, mainly ethylene oxide (also named oxirane, C₂H₄O). This molecule has been observed in the interstellar medium by observation in the millimeter region (Astrophys. J. 489 (1997) 553; Astron. Astrophys. 337 (1998) 275). On the contrary, the predicted O-compounds (formaldehyde and methanol) have not been identified in this experiment. Furthermore, we have identified NH₃ in the gaseous products with an initial mixture of N₂ (98%) and CH₄ (2%).The paper describes the experimental device used in this work, in particular the IRS and GC–MS techniques. We also comment the results related to the detection of the O-containing compounds and NH₃ and their implications on our knowledge of the chemistry of Titan's atmosphere and on the retrieval of the future Titan data expected from Cassini-Huygens.     

Ice‐cover variability on shallow lakes at high latitudes: model simulations and observations

A one‐dimensional thermodynamic model for simulating lake‐ice phenology is presented and evaluated. The model can be driven with observed daily or hourly atmospheric forcing of air temperature, relative humidity, wind speed, cloud amount and snowfall. In addition to computing the energy balance components, key model output includes the temperature profile at an arbitrary number of levels within the ice/snow (or the water temperature if there is no ice) and ice thickness (clear ice and snow‐ice) on a daily basis, as well as freeze‐up and break‐up dates. The lake‐ice model is used to simulate ice‐growth processes on shallow lakes in arctic, sub‐arctic, and high‐boreal forest environments. Model output is compared with field and remote sensing observations gathered over several ice seasons. Simulated ice thickness, including snow‐ice formation, compares favourably with field measurements. Ice‐on and ice‐off dates are also well simulated when compared with field and satellite observations, with a mean absolute difference of 2 days. Model simulations and observations illustrate the key role that snow cover plays on the seasonal evolution of ice thickness and the timing of spring break‐up. It is also shown that lake morphometry, depth in particular, is a determinant of ice‐off dates for shallow lakes at high latitudes. Copyright © 2003 John Wiley & Sons, Ltd.     

Effects of compressibility on the flow of lava

Lava contains gas bubbles and hence is a compressible liquid whose density increases as a function of pressure. After eruption at the Earth's surface, it spreads at a rate which is a function of its thickness and it is compressed under its own weight. Therefore, both thickness and spreading rate are determined by a balance between viscous and compressible effects. Theoretical equations are derived for the shape and velocity of a compressible liquid spreading on a horizontal surface. Solutions are obtained for a fixed eruption rate Q. The radial extent of the flow increases proportional to t ^1/2. A dimensionless number C is defined which characterizes the importance of flow compression: , where ₀ is bubbly lava density at atmospheric pressure, compressibility, viscosity and g the acceleration of gravity. C can be thought of as the ratio of two characteristic length-scales, one for compression effects and one for viscous effects. The larger C is, the more important compressibility effects are. As C is increased, the flow becomes thinner because the liquid is compressed more and more efficiently. Compressibility acts to smooth out variations of flow thickness, which provide the driving force. Thus, all else being equal, a compressible liquid flows less rapidly than an incompressible one. When trying to infer the effective viscosity of a flow from its spreading rate, the neglect of compressibility leads to an overestimate. The various factors which act to determine the distribution of gas bubbles in lava flows are reviewed and discussed quantitatively. Comparison with data from Obsidian Dome (Eastern California) shows that disequilibrium effects are important and that bubble resorption during burial in a thick flow is not a pervasive phenomenon. The analysis is applied to the 1979 dome of Soufrière de Saint Vincent (W.I.). An effective value of compressibility for this 100-m-thick dome is 1.5x10^–6 Pa^–1. This implies that, all else being equal, the viscosity of this lava may be overestimated by a factor of 5 if no account is taken of the compressible nature of the flow.     

Coronal mass ejection associated with the stationary post-flare arch of 21–22 May 1980

By using a combination of X-ray (HXIS), H (Haleakala), white-light corona (Solwind), and zodiacal light (Helios) images on 21–22 May, 1980 we demonstrate, and try to explain, the co-existence of a coronal mass ejection with a stationary post-flare coronal arch. The mass ejection was seen, both by Solwind and Helios, in prolongation of the path of a powerful spray, whereas the active region filament did not erupt. A tentative comparison is made with other occurrences of stationary, or quasi-stationary post-flare coronal arches.     

Origin of nickel in water solution of the chalk aquifer in the north of France and influence of geochemical factors

In the north of France, high registers of nickel are sometimes recorded within the chalk aquifer. In a confined context, the presence of pyrite in the covering clays or in the marcasite nodules encrusted in the clay may constitute a natural source of trace metals. With an objective of sanitary control, the limits of chemical contents regulating the quality of water destined for human consumption have been lowered by the European Framework Directive in the field of water policy (2000/60/EC). As a result, nickel limits have been reduced from 50 to 20 μg/l. The analyses, carried out on three water catchment fields in our area of study, were centred on variable parameters (Eh, O₂(d), pH, Conductivity, T°), major elements (SO₄, NO₃) and metals (Fe, Ni, Mn, Co). The acquired data enabled us to identify from one hand, the conditions which are presented within the site, special thanks to the evolution of nitrate and iron contents and on the other hand, the natural origin (geological) of nickel for two of the three sites studied based essentially on the evaluation of the Nickel/Cobalt ratio. Thus, on the first site, the evolution of nickel content and nitrate content showed the influence of the phenomenon of denitrification on the re-mobilisation of the nickel. Whereas on the second site, a high variation of total iron content and oxygen dissolved in solution highlighted a particular phenomenon of oxidation of the pyrite through molecular oxygen. Finally, the correlation with the sulphates clearly showed behaviour of the nickel, once released, that was entirely dependent on the phenomenon of adsorption on the iron and manganese hydroxides.     

Core formation and the oxidation state of the Earth: Additional constraints from Nb, V and Cr partitioning

We have combined metal-silicate partitioning data from the literature with new experimental results at 1.5-8 GPa and 1480-2000 °C to parameterize the effects of pressure, temperature and composition on the partitioning of V, Cr and Nb between liquid Fe metal (with low S and C content) and silicate melt.Using information from the steelmaking literature to correct for interactions in the metal phase, we find that, for peridotitic silicate melts, metal-silicate partition coefficients are given by:

     

Biotite weathering and nutrient uptake by ectomycorrhizal fungus, Suillus tomentosus, in liquid-culture experiments

Ectomycorrhiza-forming fungi (EMF) alter the nutrient-acquisition capabilities of vascular plants, and may play an important role in mineral weathering and the partitioning of products of weathering in soils under nutrient-limited conditions. In this study, we isolated the weathering function of Suillus tomentosus in liquid-cultures with biotite micas incubated at room temperature. We hypothesized that the fungus would accelerate weathering by hyphal attachment to biotite surfaces and transmission of nutrient cations via direct exchange into the fungal biomass. We combined a mass-balance approach with scanning electron microscopy (SEM) and atomic force microscopy (AFM) to estimate weathering rates and study dissolution features on biotite surfaces. Weathering of biotite flakes was about 2-3 orders of magnitude faster in shaken liquid-cultures with fungus compared to shaken controls without fungus, but with added inorganic acids. Adding fungus in nonshaken cultures caused a higher dissolution rate than in inorganic pH controls without fungus, but it was not significantly faster than organic pH controls without fungus. The K⁺, Mg²⁺ and Fe²⁺ from biotite were preferentially partitioned into fungal biomass in the shaken cultures, while in the nonshaken cultures, K⁺ and Mg²⁺ was lost from biomass and Fe²⁺ bioaccumulated much less. Fungal hyphae attached to biotite surfaces, but no significant surface changes were detected by SEM. When cultures were shaken, the AFM images of basal planes appeared to be rougher and had abundant dissolution channels, but such channel development was minor in nonshaken conditions. Even under shaken conditions the channels only accounted for only 1/100 of the total dissolution rate of 2.7 × 10⁻¹⁰ mol of biotite m⁻² s⁻¹. The results suggest that fungal weathering predominantly occurred not by attachment and direct transfer of nutrients via hyphae, but because of the acidification of the bulk liquid by organic acids, fungal respiration (CO₂), and complexation of cations which accelerated dissolution of biotite. Results further suggest that both carbohydrate source (abundant here) and a host with which nutrients are exchanged (missing here) may be required for EMF to exert an important weathering effect in soils. Unsaturated conditions and physical dispersal of nutrient-rich minerals in soils may also confer a benefit for hyphal growth and attachment, and promote the attachment-mediated weathering which has been observed elsewhere on soil mineral surfaces.