排序方式: 共有48条查询结果,搜索用时 15 毫秒
1.
This paper assesses the feasibility of applying remote sensing algorithms based on blue/green reflectance ratios to Case 2 waters. Two algorithms from the SeaDAS (NASA) image processing package, OC4v4 for surface chlorophyll concentration, Chl, and K(490) for the attenuation coefficient for downward irradiance at 490 nm, Kd(490), were investigated using an extensive set of observations from the Irish and Celtic Seas. In situ data from a profiling radiometer were used as inputs for the algorithms to avoid uncertainties in atmospheric correction procedures, and direct measurements of Chl and Kd490 and were used for validation purposes. The standard versions of the algorithms performed poorly: OC4v4 generally overestimated Chl (with a very low coefficient of determination), and K(490) progressively underestimated Kd490 for values greater than 0.3 m−1. A two-step procedure for level 2 product generation was therefore devised in which the numerical coefficients of OC4v4 and K(490) were tuned for the two optical water types known to occur most frequently in this region (McKee, D., Cunningham, A., 2006. Identification and characterisation of two optical water types in the Irish Sea from in situ inherent optical properties and seawater constituents. Estuarine, Coastal and Shelf Science 68, 305–316) by statistical regression on a data set of 102 stations from the Irish and Celtic Seas. The water types were distinguished by the magnitude of their normalised water leaving radiance signals at 665 nm, nLw(665), and appropriate versions of the tuned algorithms applied to each water type. When this procedure was tested on an independent data set of 19 stations from the Bristol Channel, Chl values were recovered with an RMS error of 0.36 mg m−3 and Kd(490) values with an RMS error of 0.095 m−1. The identification of water types from water-leaving radiance signals, and the application of band-ratio algorithms tuned for specific water types, may therefore provide a simple means of improving the quality of remote sensing products in optically complex shelf seas. 相似文献
2.
Brian N. Tissot Barbara A. Best Eric H. Borneman Andrew W. Bruckner Cara H. Cooper Heather D’Agnes Timothy P. Fitzgerald Amanda Leland Susan Lieberman Amy Mathews Amos Rashid Sumaila Teresa M. Telecky Frazer McGilvray Brian J. Plankis Andrew L. Rhyne Glynnis G. Roberts Benjamin Starkhouse Todd C. Stevenson 《Marine Policy》2010
As the world’s largest importer of marine ornamental species for the aquaria, curio, home décor, and jewelry industries, the United States has an opportunity to leverage its considerable market power to promote more sustainable trade and reduce the effects of ornamental trade stress on coral reefs worldwide. Evidence indicates that collection of some coral reef animals for these trades has caused virtual elimination of local populations, major changes in age structure, and promotion of collection practices that destroy reef habitats. Management and enforcement of collection activities in major source countries such as Indonesia and the Philippines remain weak. Strengthening US trade laws and enforcement capabilities combined with increasing consumer and industry demand for responsible conservation can create strong incentives for improving management in source countries. This is particularly important in light of the March 2010 failure of the parties to the Convention on International Trade in Endangered Species (CITES) to take action on key groups of corals. 相似文献
3.
4.
Petrology of Philippine geothermal systems and the application of alteration mineralogy to their assessment 总被引:1,自引:0,他引:1
Philippine geothermal systems occur in the vicinity of large Holocene calc-alkaline volcanic complexes. Wells drilled in these areas encountered multiple intrusions; the latest dikes are the subsurface manifestations of the youngest heat source. Commonly, at least two hydrothermal regimes are juxtaposed in a single area, with the latest being in equilibrium with the present temperature and chemical regime.Alteration by neutral-pH water is pervasive and abundant. A contact-metamorphic aureole also occurs near intrusives. Alteration due to acid-sulfate fluids is generally confined to permeable structures. Neutral-pH alteration is divided into four zones on the basis of key clay minerals, and two subzones are defined by calc-silicates. These are the smectite (ambient to 180°C), transition (180–230°C), illite (230–320°C) and biotite (270–340°C) zones. Subzones are defined by epidote (250–340°C) and amphibole (280–340°C). The four main zones of acid alteration are: kaolinite (ambient to 120°C), dickite ± kaolinite (120–200°C), dickite ± pyrophyllite (200–250°C), and pyrophyllite ± illite (230–320°C). Where relict high-temperature alteration reaches the surface, the area being drilled is usually the outflow zone of the present system.These hydrothermal mineral assemblages are used: (1) as geothermometers; (2) to assist in determining the depth at which the production casing will be set during drilling; (3) to estimate fluid pH and other chemical parameters; (4) to predict possible corrosion and scaling tendencies of the fluids; (5) as a measure of permeability and possible cold water influx into wells; (6) as a guide to field hydrology; and (7) to estimate roughly the thickness of the eroded overburden. 相似文献
5.
Hong Zhang Hung-Lung Huang Agnes Lim Robert Holz Steve Dutcher Fred Nagle Liam Gumley Jinnian Wang Runhe Shi Wei Gao 《Frontiers of Earth Science》2010,4(3):363-373
The Atmospheric Infrared Sounder (AIRS) and MODerate-Resolution Imaging Spectroradiometer (MODIS) on board NASA Earth Observing
System (EOS) Aqua spacecraft measure the upwelling infrared radiance used for numerous remote-sensing- and climate-related
applications. AIRS provides high spectral resolution infrared radiances, while MODIS provides collocated high spatial resolution
radiances at 16 broad infrared bands. An optimal algorithm for cloud-clearing has been developed for AIRS cloudy soundings
at the University of Wisconsin-Madison, where the spatially and spectrally collocated AIRS and MODIS data has been used to
analyze the characteristic of this algorithm. An analysis and characterization of the global AIRS cloud-cleared radiances
using the bias and the standard deviation between the cloud-cleared and the nearby clear measurements are studied. Scene inhomogeneity
for both land- and water-surface types has been estimated to account for the assessed error. Both monthly and seasonal changes
of global AIRS/MODIS cloud-clearing performance also have been analyzed. 相似文献
6.
We combined high‐resolution and space‐resolved elemental distribution with investigations of magnetic minerals across Fe,Ni‐alloy and troilite interfaces for two nonmagmatic (Morasko and Mundrabilla) IAB group iron meteorites and an octahedrite found in 1993 in Coahuila/Mexico (Coahuila II) preliminarily classified on Ir and Au content as IIAB group. The aim of this study was to elucidate the crystallization and thermal history using gradients of the siderophile elements Ni, Co, Ge, and Ga and the chalcophile elements Cr, Cu, and Se with a focus on magnetic minerals. The Morasko and Coahuila II meteorite show a several mm‐thick carbon‐ and phosphorous‐rich transition zone between Fe,Ni‐alloy and troilite, which is characterized by magnetic cohenite and nonmagnetic or magnetic schreibersite. At Morasko, these phases have a characteristic trace element composition with Mo enriched in cohenite. In both Morasko and Coahuila II, Ni is enriched in schreibersite. The minerals have crystallized from immiscible melts, either by fractional crystallization and C‐ and P‐enrichment in the melt, or by partial melting at temperatures slightly above the eutectic point. During crystallization of Mundrabilla, the field of immiscibility was not reached. Independent of meteorite group and cooling history, the magnetic mineralogy (daubreelite, cohenite and/or schreibersite, magnetite) is very similar to the troilite (and transition zone) for all three investigated iron meteorites. If these minerals can be separated from the metal, they might provide important information about the early solar system magnetic field. Magnetite is interpreted as a partial melting or a terrestrial weathering product of the Fe,Ni‐alloy under oxidizing conditions. 相似文献
7.
Effect of moderate shock waves on magnetic susceptibility and microstructure of a magnetite‐bearing ore
下载免费PDF全文
![点击此处可从《Meteoritics & planetary science》网站下载免费的PDF全文](/ch/ext_images/free.gif)
This study demonstrates a relationship between changes of magnetic susceptibility and microstructure developing in minerals of a magnetite‐bearing ore, experimentally shocked to pressures of 5, 10, 20, and 30 GPa. Shock‐induced effects on magnetic properties were quantified by bulk magnetic susceptibility measurements while shock‐induced microstructures were studied by high‐resolution scanning electron microscopy. Microstructural changes were compared between magnetite, quartz, amphibole, and biotite grains. In the 5 GPa sample, a sharp drop of magnetic susceptibility correlates with distinct fragmentation as well as with formation of shear bands and twins in magnetite. At 10 GPa, shear bands and twins in magnetite are accompanied by droplet‐shaped nanograins. In this shock pressure regime, quartz and amphibole still show intensive grain fragmentation. Twins in quartz and foam‐shaped, highly porous amphibole are formed at 20 and 30 GPa. The formation of porous minerals suggests that shock heating of these mineral grains resulted in localized temperature spikes. The identified shock‐induced features in magnetite strongly advise that variations in the bulk magnetic susceptibility result from cooperative grain fragmentation, plastic deformation and/or localized amorphization, and probably postshock annealing. In particular, the increasing shock heating at high pressures is assumed to be responsible for a partial defect annealing which we suggest to be responsible for the almost constant values of magnetic susceptibility above 10 GPa. 相似文献
8.
Efisio Solazzo Silvana Di Sabatino Noel Aquilina Agnes Dudek Rex Britter 《Boundary-Layer Meteorology》2010,137(3):441-457
The ongoing trend of urbanisation worldwide is leading to a growing requirement for detailed flow and transport parameterisations
to be included within numerical weather prediction (NWP) models. Such models often employ a simple roughness parameterisation
for urban areas, which is not particularly accurate in predicting or assessing the flow and dispersion at street scale. Moreover,
this kind of parameterisation offers too poor a representation of the mechanical and thermal forcing exerted by urban areas
on the larger scale flow. At present, high computational costs and long simulation running times are among the constraints
for the implementation of more detailed urban sub-models within NWP models. To overcome such limitations, a downscaling procedure
from the atmospheric flow at the synoptic scale to the neighbourhood scale and below, is presented in this study. This is
achieved by means of a simple urban model based on a parameterised formulation of the drag exerted by the building on the
airflow. Application of the urban model for estimating spatially-averaged mean wind speed and the urban heat island over a
selected neighbourhood area in Lisbon, Portugal, is presented. The results show the capability of the urban model to provide
more accurate mean wind and temperature profiles. Moreover, the urban model has the advantage of being cost effective, as
it requires small computational resources, and thus is suitable to be adopted in an operational context. The model is simple
enough to be also used to assess how the resolving of urban surface processes may affect those at the larger scales. 相似文献
9.
10.