Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Study of the flood control scheduling scheme for the Three Gorges Reservoir in a catastrophic flood

The Three Gorges Project is the world's largest water conservancy project. According to the design standards for the 1,000‐year flood, flood diversion areas in the Jingjiang reach of the Yangtze River must be utilized to ensure the safety of the Jingjiang area and the city of Wuhan. However, once these areas are used, the economic and life loss in these areas may be very great. Therefore, it is vital to reduce this loss by developing a scheme that reduces the use of the flood diversion areas through flood regulation by the Three Gorges Reservoir (TGR), under the premise of ensuring the safety of the Three Gorges Dam. For a 1,000‐year flood on the basis of a highly destructive flood in 1954, this paper evaluates scheduling schemes in which flood diversion areas are or are not used. The schemes are simulated based on 2.5‐m resolution reservoir topography and an optimized model of dynamic capacity flood regulation. The simulation results show the following. (a) In accord with the normal flood‐control regulation discharge, the maximum water level above the dam should be not more than 175 m, which ensures the safety of the dam and reservoir area. However, it is necessary to utilize the flood diversion areas within the Jingjiang area, and flood discharge can reach 2.81 billion m³. (b) In the case of relying on the TGR to impound floodwaters independently rather than using the flood diversion areas, the maximum water level above the dam reaches 177.35 m, which is less than the flood check level of 180.4 m to ensure the safety of the Three Gorges Dam. The average increase of the TGR water level in the Chongqing area is not more than 0.11 m, which indicates no significant effect on the upstream reservoir area. Comparing the various scheduling schemes, when the flood diversion areas are not used, it is believed that the TGR can execute safe flood control for a 1,000‐year flood, thereby greatly reducing flood damage.     

P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

利用自回归模型检测地球极移重力效应

同时采用4个台站的国际超导重力仪长期连续重力观测资料和国际地球自转服务中心提供的同步地球自转参数，研究了极移引起的地球重力场变化特征。利用自回归模型估计了各序列的功率谱密度和积谱密度，结果表明极移导致的重力效应的主要能量集中在Chandler摆动和周年项附近，叠积后实际重力观测与极移重力信号理论值之间的差异分别为0．4％和3．9％，说明超导重力仪可有效监测极移导致的重力变化。     

成团天体系统成员概率计算的有效性问题

本文提出了一个普适的衡量成团天体系统成员概率计算结果的有效性指数：Ｅ＝１－ＮΣ｛Ｐ（ｉ）［１－Ｐ（ｉ）］｝／ΣＰ（ｉ）Σ［１－Ｐ（ｉ）］｝，并以此对以Ｓａｎｄｅｒｓ方法为基础的各种成员确定模型的有效性进行了分析．从总体上说，运动学资料（自行、视向速度等）是一类有效的观测判据．     

关于国有地了企业经营者实行年薪制的构想

为建立社会主义市场经济的地矿工作新秩序，本文对国有地矿企业的经营者（厂长、经理）这一特殊群体进行了分析。着重研究了新形势下企业经营者实行年薪制的问题。指出年薪制就是以企业一个生产经营周期为单位确定经营者的报酬，这一周期通常为一年。进而阐述了为什么要实行企业经营者年薪制；企业经营者的收入应与职工工资完全脱钩；采用基础报酬加效益报酬的方法确定收入等等。并构想了实行经营者年薪制所需要的外部环境：建立经营者人才市场、经营者要能进能出、实行任职资格制度、建立风险机制、按劳动力市场经济规律办事。     

A new radiolarian species Clathrocorys gracilis from northern South China Sea

A new species,Clathrocorys gracilis nov. spec. of Tripocyrtidae (Radiolarians: Nassellaria) from surface water in northern South China Sea, is described in this paper. The new species has four radial beams arising from the cephalic base centre, each foot with cup-shaped structure and ramified bar in the proximal section (near cephalic base), and each wing with a large mesh in the middle, a medium mesh and a small mesh on each side respectively. Project supported by the NSFC (No. 40276044) and the Chinese Academy of Sciences (No. KSCX2-SW-101B).     

Models of CN and C2 comae for comet Tago-Sato-Kosaka and comet bennett

Based on the CN and C₂ comae isophotes for two comets (1961 IX and 1970 16) given by Rahe et al. and the relevant theory of physical chemistry, we have deduced the distributions of the CN and C₂ modecules in the coma, their scale heights and mean lifetimes. The results favour the viewpoint that HCN is the parent of CN, and that C₂H₂ is the parent of C₂.