CPLD技术及其在现代时统中的应用

对CPLD(复杂可编程逻辑器件)技术的基本特征和发展趋势作了简要介绍,揭示了该技术在现代数字系统中的重要地位及作用.利用CPLD对时统设备IRIG-B码产生器进行集成,其实验结果表明,集成了的B码产生器不但简单、可靠,而且便于调试,克服了以往硬件电路复杂的缺点.     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

哀牢山-红河断裂带中段应变分析

对哀牢山—红河断裂带中段和平—水塘剖面、墨江—元江剖面和其它地段的岩石应变及磁组构进行了分析，表明应变强度的校正磁各向异性度PJ从断裂带向西至三叠系明显降低，变形强度向西迅速减弱。磁化率椭球体主轴展布反映出剪切带内、外变形方式的改变。剪切带内，以水平走滑运动为主；向西则以水平缩短为主。在应变分析中，对断裂带内的S—C组构两组面理夹角、杏仁体和石榴石应变标志体进行了测量，结果显示，剪切带内的磁组构和岩石组构间关系较差。此外，还对这两条剖面中的三叠系进行了应变和磁组构分析，找出了它们与磁化率椭球体对应轴率间的相关性。     

城市景观三维重建中的三角剖分算法

在构建城市景观时,为了快速精确地重建建筑物、绿地、河流等三维模型,提高自动化程度,缩短建设周期,需对用户采集的矢量地物数据进行三角剖分,再以OpenGL重绘三维模型。本文提出了一种对多边形进行三角剖分的递归分割算法,并以VisualC++实现,以实际的4万多个建筑物进行三角剖分实验,充分证明其是有效的。     

元胞自动机城市增长模型的空间尺度特征分析

基于元胞自动机模拟城市系统的复杂行为时,空间尺度是一个非常重要的概念,模型的模拟结果往往会随着输入数据的空间尺度变化而发生变化。然而,目前的元胞自动机城市增长模型大多没考虑数据的空间尺度特征,本文拟通过改变模型中输入数据的空间尺度来验证元胞自动机城市增长模型对尺度的敏感性及其空间尺度特征,并以长沙市为例进行实证研究。研究结果表明:元胞自动机城市增长模型只有在一定的尺度范围内才具有较高的模拟精度,并且模型对尺度具有一定的敏感性,因此为了使模型能够具有较高的模拟精度,并较好地反映城市形态特征,应认真选择模型中输入数据的空间尺度。     

测井仪器的故障分析与排除思路

TYSC-3Q与PSJ-2型数字测井仪是目前煤田测井中常用的二种测井仪器,在使用过程中难免发生诸如测井控制故障、声速探管故障、密度三侧向探管故障、井温、井液电阻率探管故障、电法面板故障、数字测井面板故障、电测井故障等常见故障类型。通过对各类故障因素进行剖析,指出了故障易发生的部位,并详细的介绍了检查的方法及故障的排除步骤。     

基于LOD的选取模型应用于电子地图多尺度显示的研究

从电子地图多尺度显示角度出发,提出了基于LOD的选取模型。在选取模型中将显示比例尺和地图比例尺的比值作为LOD算子,总结了LOD算子设置的3个层次,以及分类、分级、要素和空间几何特征等LOD算子的设置规则。