Effect of spatial variation characteristics on contouring of design storm depth

The ordinary kriging method, a geostatistical interpolation technique, was applied for developing contour maps of design storm depth in northern Taiwan using intensity–duration–frequency (IDF) data. Results of variogram modelling on design storm depths indicate that the design storms can be categorized into two distinct storm types: (i) storms of short duration and high spatial variation and (ii) storms of long duration and less spatial variation. For storms of the first category, the influence range of rainfall depth decreases when the recurrence interval increases, owing to the increasing degree of their spatial independence. However, for storms of the second category, the influence range of rainfall depth does not change significantly and has an average of approximately 72 km. For very extreme events, such as events of short duration and long recurrence interval, we do not recommend usage of the established design storm contours, because most of the interstation distances exceed the influence ranges. Our study concludes that the influence range of the design storm depth is dependent on the design duration and recurrence interval and is a key factor in developing design storm contours. Copyright © 2003 John Wiley & Sons, Ltd.     

The global joule heat production rate and the AE index

The accuracy of the AE index as a measure of the joule heat production rate is examined for a typical substorm event on 18 March 1978 by estimating the global joule heat production rate, as a function of time, using data obtained from the IMS six meridian chains. In spite of the fact that the AE index had had an initial slow growth which was followed by a rapid growth, the joule heat production rate attained a high level during the slow growth and thus their variations were considerably different from those of the AE index. Therefore, although the AE index is statistically linearly related to the global joule heat production rate, one should be cautious in assuming that details of time variations of the AE index during individual events represent those of the joule heat production rate.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

The Hα-cyclonic spectra of a flare loop system on 1981 April 27

The data such as the H-spectrum-spectroheliographic (SSHG) observations, the H-chromospheric observations, etc., of a flare loop prominence which occurred on the western solar limb on 1981 April 27 have been obtained at Yunnan Observatory. The distribution of the internal motions and the macroscopical motion of the flare loop prominence with time and space in the course of its eruption and ascension is derived from the comprehensive analysis of the data. The possible physical pictures and the instability of the motions of the loop are inferred and discussed.     

渤海、黄海、东海水温垂直结构统计特征分析

渤海、黄海与东海的水温垂直结构呈现陆架浅海特有的水文特征，其分布与变化甚为复杂。几十年来，虽然中外海洋学家曾对这些海区水文要素的分布及其变异作过大量研究，但是，关于水温垂直结构各特征值较系统的分析研究则始于六十年代初期，毛汉礼等根据一年观测资料(1958-1959)作了较全面的阐述。但是这些资料多数是用颠倒温度表观测，少数为深度温度计(BT)观测；并且研究海区限千124°E以西。本文试图分析研究近年来渤海、黄海与东海水温垂直结构各特征值的统计特性；研究海区有了较大的扩展：黄海至124°30''E；东海至127°E。 文中引用国家海洋局1975一1980年间BT观测资料，共计166个观测站，累积约七千余个BT片资料。     

1990年12月14日台湾强震的预报判据

本文运用福建省沿海气象要素的异常变化,作台湾省的中、短期地震预报,取得了成功的效果。采用长乐历年各月14时最低气压的距平值,作台湾省未来4～7个月内出现强震的预报依据,并采用热异常进行短临跟踪。当秋冬季节连续4d 长乐、福州、台北的气温均比广州累计高出10℃时,预报未来1～5d 台湾省出现7级强震。又根据近百年来台湾发生的强震,统计其活动季节,得到近20年来7级地震发生的时间,绝大部分在9～12月。     

海洋走航式单边连续观测地震折射波Δt解释方法--1种新的浅层折射单支时距曲线解释方法

在浅层工程折射地震测量中 ,通常采用相遇观测系统采集数据和相应的解释方法进行解释 ;对于单边观测采集方法由于与其相应的解释方法较少而少被采用。本文提出 1种方法简单、精度可靠、可直接利用同一点相邻 2排列 2次观测的初至折射时间并适合于海洋走航式单边连续观测系统的折射初至资料解释方法。其精度基本与同观测段的采用相遇观测的差异时距方法解释的精度十分接近。该方法即适合于人工解释又适合于计算机自动解释。     

雪宝顶碱性花岗岩岩石地球化学与成矿控制

对雪宝顶碱性花岗岩具有高丰度的W、Sn、Be含量和W、Sn矿化花岗岩的微量元素组合特征进行了分析，结果显示：稀土元素具有∑REE含量与LREE／HREE比值偏低和负Eu异常的特点；元素比值K／Rb，U／Th，Nb／Ta的规律性变化以及矿脉产状特征等表明W-(Sn)-Be脉状矿床形成于岩浆演化晚期，与岩浆期后的热液活动有关。     

豹皮菌中两种氨基酸成分对N－甲基D－门冬氨酸（NMDA）受体的作用

报道豹皮菌（Ａｍａｎｉｔａｐａｎｔｈｅｒｉｎａ）中两种氨基酸成分ＫＩ－Ⅰ、ＫＩ－Ⅱ对ＮＭＤＡ（Ｎ－Ｍｅｔｈｙｌ－Ｄ－Ａｓｐａｒｔａｔｅ）受体的活性研究。ＫＩ－Ⅰ和ＫＩ－Ⅱ对ＮＭＤＡ受体的作用是通过大鼠大脑皮质和脊髓突触部分的受体结合实验进行的。实验结果指出：ＫＩ－Ⅰ是一种高活性ＮＭＤＡ受体激动剂；ＫＩ－Ⅱ是ＮＭＤＡ受体拈抗剂。     

一种腐屑食性鱼类对生态系统氮循环的影响

研究表明 :腐屑食性鱼类——梭鱼对环境中有机氮的摄入能力随体重的增加而增加 ,随温度的升高 ,体重系数显著减少。摄入氮 (CN,mg/ d)与体重 (W,g)和温度 (T,℃ )的数值关系可用如下模型表示 :CN=0 .6 370 W1 .0 642 ln(3.70 0 8T)。体重为 1 0 0 g的梭鱼每日可消耗环境中 332 mg氮有机质。梭鱼氮的吸收效率主要受温度的影响 ,而氮的转化效率与体重呈显著的正相关关系。随体重的增加 ,排泄氮所占比例降低