Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

An approximate method for evaluating the shear band thickness in saturated soils

A formula for the thickness of a shear band formed in saturated soils under a simple shear or a combined stress state has been proposed. It is shown that the shear band thickness is dependent on the pore pressure properties of the material and the dilatancy rate, but is independent of the details of the combined stress state. This is in accordance with some separate experimental observations. Copyright © 2004 John Wiley & Sons, Ltd.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

Possible chemical structures and biological precursors of different vitrinites in coal measure in Northwest China

Chemical structure of Jurassic vitrinites isolated from the coals in basins in NW China have been checked using solid state ¹³C NMR and flash pyrolysis-GC/MS. Study shows some Jurassic collodetrinites are rich in aliphatic products in pyrolysates, consisting with the high amount of methylene carbon in ¹³C NMR spectra. In contrast, pyrolysates of Jurassic collotelinites are rich in phenols and alkylbenzenes. Also one Pennsylvanian and one Permian vitrinite selected from the Ordos basin, NW China have been checked for comparison. The proportion of aliphatics is low in pyrolysates, and aliphatic carbon peak in ¹³C NMR spectrum of Permian vitrinite is mostly composed of gas-prone carbons compared with collodetrinites in those Jurassic basins. But both pyrolysis and ¹³C NMR data shows the Pennsylvanian vitrinite is not only gas-prone but also oil-prone. Relatively high proportion of long chain aliphatic structure of some Jurassic vitrinite in Junggar, Turpan-Hami basins may be due to the contribution of liptodetrinites, which may be included during the formation of vitrinites. And it seems that suberinite is the most possible precursor of long chain aliphatics in the structure of Jurassic collodetrinite.     

黄、渤海沿岸海冰测点代表性浅析

通过分析１９８０年以后的海冰资料和卫星云图照片，对黄、渤海沿岸１１个海冰测点的历史变迁进行了评述，浅析了测点的优劣及使用资料时应注意的事项。     

碘－钒盐催化下合成的四溴邻苯二甲酸酐

报道一种新的有效催化剂－碘－钒盐和在一定条件下合成四溴邻苯二甲酸酐的方法。探讨催化剂的组成配比、用量、温度及废酸循环使用等因素对合成方法的影响。该催化剂的催化效果和常用的碘、碘－铁催化剂相同，适用于四溴邻苯二甲酸酐的合成。     

南极布兰斯菲尔德海峡表层沉积物的酸解烃

本文研究了南极布兰斯菲尔德海峡表层沉积物的酸解烃分布特征，并佐以热释汞和蚀变碳酸盐的分析。从酸解烃中甲烷含量的低值和Ｃ１／（Ｃ２＋Ｃ３）比值，以及乙烯的存在等判断，布兰斯菲尔德海峡沉积物的烃类气体来自于生物成因。     

钛胶海水提铀动力学研究Ⅱ——吸附机理的推断

海水提铀机理的研究,已逐渐受到重视,然而,至今研究还不是很深入,观点也各有差别.例如,Keen等[1]认为钛胶从海水中吸附铀是阳离子交换过程,即海水中的铀是UO₂2+离子的形式与钛胶进行交换;尾方升等[2]则倾向于阴离子吸着,即铀是以UO₂(CO₃)₃4-的形式被吸附.我们曾于1973年在海洋局系统的一次会议上提出阳离子给合交换的看法,并在后来的两次专业会议上予以补充发展.张正斌[3]认为是阳离子交换或一价阳离子失水络合.最近崔清晨[4]提出可能是UO₂(OH)₃-的络合吸附.根据几年来的工作,我们仍认为,钛胶从海水中的吸铀机理可能是一种阳离子形式的络合交换过程.     

塞曼石墨炉原子吸收法直接测定海水中的铬

海水基体对Cr有增感作用。本文研究了抗坏血酸、柠檬酸三铵、酒石酸、乙酸铵等有机基体改进剂对消除基体干扰效果。前二者均有效地消除基体干扰,但1％抗坏血酸 1％柠檬酸三铵混合试剂的效果更好,它不仅可以消除基体干扰,还可降低背景及噪声,Cr的吸收峰也较平滑。本法准确,相对偏差在0.7—4.4％范围内。回收率在92—109％范围内。若海水Cr含量低于定量下限时,可采用多次进样法。