Consolidation of double‐layered ground with vertical drains

Vertical drains are usually installed in subsoil consisting of several layers. Due to the complex nature of the problem, over the past decades, the consolidation properties of multi‐layered ground with vertical drains have been analysed mainly by numerical methods. An analytical solution for consolidation of double‐layered ground with vertical drains under quasi‐equal strain condition is presented in this paper. The main steps for the computation procedure are listed. The convergence of the series solution is discussed. The comparisons between the results obtained by the present analytical method and the existing numerical solutions are described by figures. The orthogonal relation for the system of double‐layered ground with vertical drains is proven. Finally, some consolidation properties of double‐layered ground with vertical drains are analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

南极布兰斯菲尔德海峡表层沉积物的酸解烃

本文研究了南极布兰斯菲尔德海峡表层沉积物的酸解烃分布特征，并佐以热释汞和蚀变碳酸盐的分析。从酸解烃中甲烷含量的低值和Ｃ１／（Ｃ２＋Ｃ３）比值，以及乙烯的存在等判断，布兰斯菲尔德海峡沉积物的烃类气体来自于生物成因。     

钛胶海水提铀动力学研究Ⅱ——吸附机理的推断

海水提铀机理的研究,已逐渐受到重视,然而,至今研究还不是很深入,观点也各有差别.例如,Keen等[1]认为钛胶从海水中吸附铀是阳离子交换过程,即海水中的铀是UO₂2+离子的形式与钛胶进行交换;尾方升等[2]则倾向于阴离子吸着,即铀是以UO₂(CO₃)₃4-的形式被吸附.我们曾于1973年在海洋局系统的一次会议上提出阳离子给合交换的看法,并在后来的两次专业会议上予以补充发展.张正斌[3]认为是阳离子交换或一价阳离子失水络合.最近崔清晨[4]提出可能是UO₂(OH)₃-的络合吸附.根据几年来的工作,我们仍认为,钛胶从海水中的吸铀机理可能是一种阳离子形式的络合交换过程.     

塞曼石墨炉原子吸收法直接测定海水中的铬

海水基体对Cr有增感作用。本文研究了抗坏血酸、柠檬酸三铵、酒石酸、乙酸铵等有机基体改进剂对消除基体干扰效果。前二者均有效地消除基体干扰,但1％抗坏血酸 1％柠檬酸三铵混合试剂的效果更好,它不仅可以消除基体干扰,还可降低背景及噪声,Cr的吸收峰也较平滑。本法准确,相对偏差在0.7—4.4％范围内。回收率在92—109％范围内。若海水Cr含量低于定量下限时,可采用多次进样法。     

成都城市发展对热岛强度影响的主成份回归分析

本文对成都市总人口、建成区面积等11个因子、作了主成份回归L-S估计和M-估计,讨论了成都城市发展对“热岛”强度的主要影响因子。结果表明,城区房屋建筑面积及总人口数是影响城市气候(气温)的主要因子,其次为城市人口总户数、建成面积等。 文中,对回归方程进行了拟合计算,回归效果比较满意(尤其是稳健回归)。     

Re-discussion on the Jiaochang Arcuate Structure, Sichuan Province, and the Seismogenic Structure for Diexi Earthquake in 19331

The Jiaocbang arcuate structure is one of the numerous arcuate structural belts in Sichuan. The present paper gives a further argument about the characteristics of that arcuate structure and the new activity of the Songpinggou fault and affirms that the Songpinggou fault is an active fault in the Holocene epoch. The Diexi M7.5 earthquake took place in 1933 on the west wing of that arcuate structure, near the apex of the arc. Many authors have given quite different opinions about the genetic structure of that earthquake. The authors have made on-the-spot investigations time and again over recent years. Besides this, the authors have also further studied the shape of intensity contour lines, the distribution characteristics of ground surface seismic hazards, the left-lateral dislocation of buildings along the Songpinggou fault, the NWtrending ground fissures that developed on the ground surface after earthquake, and so on. On this basis, it is still considered that the seismogenic fault of the 1933 Diexi M7.5 earthquake was the Songpinggou fault on the west wing of the Jiaochang arcuate structure.     

中强地震前山东地下流体地震前兆模糊分维特征研究

采用模糊集理论与分形理论相结合的模糊分维方法，计算山东地下流体在１９８３年菏泽５．９级地震和１９９５年苍山５．２级地震前的变化。分析结果认为，模糊分维值反映了地震前兆时序观测资料的结构变化特征，具有一定的物理意义，为从复杂的地下流体前兆观测值中提取地震异常信息提供了新的方法，但对某些台、测项而言、必须具体分析其模糊分维变化特征及其震前异常变化特征。